| 
     1 Lantiq SoC ASC serial controller
    2 
    3 Required properties:
    4 - compatible : Should be "lantiq,asc"
    5 - reg : Address and length of the register set for the device
    6 - interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
    7   depends on the interrupt-parent interrupt controller.
    8 
    9 Optional properties:
   10 - clocks: Should contain frequency clock and gate clock
   11 - clock-names: Should be "freq" and "asc"
   12 
   13 Example:
   14 
   15 asc0: serial@16600000 {
   16         compatible = "lantiq,asc";
   17         reg = <0x16600000 0x100000>;
   18         interrupt-parent = <&gic>;
   19         interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
   20                 <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
   21                 <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
   22         clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
   23         clock-names = "freq", "asc";
   24 };
   25 
   26 asc1: serial@e100c00 {
   27         compatible = "lantiq,asc";
   28         reg = <0xE100C00 0x400>;
   29         interrupt-parent = <&icu0>;
   30         interrupts = <112 113 114>;
   31 };
Cache object: 5fb304409ccd0472d08447ccef8ce751 
 
 |