1 WM8962 audio CODEC
2
3 This device supports I2C only.
4
5 Required properties:
6
7 - compatible : "wlf,wm8962"
8
9 - reg : the I2C address of the device.
10
11 Optional properties:
12
13 - clocks : The clock source of the mclk
14
15 - spk-mono: This is a boolean property. If present, the SPK_MONO bit
16 of R51 (Class D Control 2) gets set, indicating that the speaker is
17 in mono mode.
18
19 - mic-cfg : Default register value for R48 (Additional Control 4).
20 If absent, the default should be the register default.
21
22 - gpio-cfg : A list of GPIO configuration register values. The list must
23 be 6 entries long. If absent, no configuration of these registers is
24 performed. And note that only the value within [0x0, 0xffff] is valid.
25 Any other value is regarded as setting the GPIO register by its reset
26 value 0x0.
27
28 Example:
29
30 wm8962: codec@1a {
31 compatible = "wlf,wm8962";
32 reg = <0x1a>;
33 clocks = <&clks IMX6QDL_CLK_CKO>;
34
35 gpio-cfg = <
36 0x0000 /* 0:Default */
37 0x0000 /* 1:Default */
38 0x0013 /* 2:FN_DMICCLK */
39 0x0000 /* 3:Default */
40 0x8014 /* 4:FN_DMICCDAT */
41 0x0000 /* 5:Default */
42 >;
43 };
Cache object: 80af0b455989621c99f66dbc019ddcea
|