| 
     1 Macronix SPI controller Device Tree Bindings
    2 --------------------------------------------
    3 
    4 Required properties:
    5 - compatible: should be "mxicy,mx25f0a-spi"
    6 - #address-cells: should be 1
    7 - #size-cells: should be 0
    8 - reg: should contain 2 entries, one for the registers and one for the direct
    9        mapping area
   10 - reg-names: should contain "regs" and "dirmap"
   11 - interrupts: interrupt line connected to the SPI controller
   12 - clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
   13 - clocks: should contain 3 entries for the "ps_clk", "send_clk" and
   14           "send_dly_clk" clocks
   15 
   16 Example:
   17 
   18         spi@43c30000 {
   19                 compatible = "mxicy,mx25f0a-spi";
   20                 reg = <0x43c30000 0x10000>, <0xa0000000 0x20000000>;
   21                 reg-names = "regs", "dirmap";
   22                 clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 18>;
   23                 clock-names = "send_clk", "send_dly_clk", "ps_clk";
   24                 #address-cells = <1>;
   25                 #size-cells = <0>;
   26 
   27                 flash@0 {
   28                         compatible = "jedec,spi-nor";
   29                         reg = <0>;
   30                         spi-max-frequency = <25000000>;
   31                         spi-tx-bus-width = <4>;
   32                         spi-rx-bus-width = <4>;
   33                 };
   34         };
Cache object: 085a57487d32caf1ebbaa16d313819aa 
 
 |