FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/Bindings/spi/spi-xlp.txt

     SPI Master controller for Netlogic XLP MIPS64 SOCs
     ==================================================
     
     Currently this SPI controller driver is supported for the following
     Netlogic XLP SoCs:
             XLP832, XLP316, XLP208, XLP980, XLP532
     
     Required properties:
     - compatible            : Should be "netlogic,xlp832-spi".
    - #address-cells        : Number of cells required to define a chip select address
                              on the SPI bus.
    - #size-cells           : Should be zero.
    - reg                   : Should contain register location and length.
    - clocks                : Phandle of the spi clock
    - interrupts            : Interrupt number used by this controller.
    
    SPI slave nodes must be children of the SPI master node and can contain
    properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
    
    Example:
    
            spi: xlp_spi@3a100 {
                    compatible = "netlogic,xlp832-spi";
                    #address-cells = <1>;
                    #size-cells = <0>;
                    reg = <0 0x3a100 0x100>;
                    clocks = <&spi_clk>;
                    interrupts = <34>;
                    interrupt-parent = <&pic>;
    
                    spi_nor@1 {
                            compatible = "spansion,s25sl12801";
                            #address-cells = <1>;
                            #size-cells = <1>;
                            reg = <1>;      /* Chip Select */
                            spi-max-frequency = <40000000>;
                    };
    };

Cache object: 25e595f575f879d8f694226e8ffd5348