1 TCPCI(Typec port cotroller interface) binding
2 ---------------------------------------------
3
4 Required properties:
5 - compatible: should be set one of following:
6 - "nxp,ptn5110" for NXP USB PD TCPC PHY IC ptn5110.
7
8 - reg: the i2c slave address of typec port controller device.
9 - interrupt-parent: the phandle to the interrupt controller which provides
10 the interrupt.
11 - interrupts: interrupt specification for tcpci alert.
12
13 Required sub-node:
14 - connector: The "usb-c-connector" attached to the tcpci chip, the bindings
15 of connector node are specified in
16 Documentation/devicetree/bindings/connector/usb-connector.yaml
17
18 Example:
19
20 ptn5110@50 {
21 compatible = "nxp,ptn5110";
22 reg = <0x50>;
23 interrupt-parent = <&gpio3>;
24 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
25
26 usb_con: connector {
27 compatible = "usb-c-connector";
28 label = "USB-C";
29 data-role = "dual";
30 power-role = "dual";
31 try-power-role = "sink";
32 source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
33 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
34 PDO_VAR(5000, 12000, 2000)>;
35 op-sink-microwatt = <10000000>;
36
37 ports {
38 #address-cells = <1>;
39 #size-cells = <0>;
40
41 port@1 {
42 reg = <1>;
43 usb_con_ss: endpoint {
44 remote-endpoint = <&usb3_data_ss>;
45 };
46 };
47 };
48 };
49 };
Cache object: e5aad3373a25569de00ca147b8501e4a
|