am335x-netcom-plus-2xx.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-only
    2 /*
    3  * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
    4  */
    5 
    6 /*
    7  * VScom OnRISC
    8  * http://www.vscom.de
    9  */
   10 
   11 /dts-v1/;
   12 
   13 #include "am335x-baltos.dtsi"
   14 #include "am335x-baltos-leds.dtsi"
   15 
   16 / {
   17         model = "NetCom Plus";
   18 };
   19 
   20 &am33xx_pinmux {
   21         uart1_pins: pinmux_uart1_pins {
   22                 pinctrl-single,pins = <
   23                         AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)                      /* RX */
   24                         AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)                      /* TX */
   25                         AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)            /* CTS */
   26                         AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)           /* RTS */
   27                         AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)            /* DTR */
   28                         AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)             /* DSR */
   29                         AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)              /* DCD */
   30                         AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)        /* RI */
   31                 >;
   32         };
   33 
   34         uart2_pins: pinmux_uart2_pins {
   35                 pinctrl-single,pins = <
   36                         AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)              /* RX */
   37                         AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)               /* TX */
   38                         AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* CTS */
   39                         AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)     /* RTS */
   40                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)    /* DTR */
   41                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* DSR */
   42                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* DCD */
   43                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* RI */
   44                 >;
   45         };
   46 };
   47 
   48 &usb0_phy {
   49         status = "okay";
   50 };
   51 
   52 &usb0 {
   53         status = "okay";
   54         dr_mode = "host";
   55 };
   56 
   57 &uart1 {
   58         pinctrl-names = "default";
   59         pinctrl-0 = <&uart1_pins>;
   60         dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
   61         dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
   62         dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
   63         rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
   64 
   65         status = "okay";
   66 };
   67 
   68 &uart2 {
   69         pinctrl-names = "default";
   70         pinctrl-0 = <&uart2_pins>;
   71         dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
   72         dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
   73         dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
   74         rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
   75 
   76         status = "okay";
   77 };
   78 
   79 &davinci_mdio_sw {
   80         phy0: ethernet-phy@0 {
   81                 reg = <1>;
   82         };
   83 };
   84 
   85 &cpsw_port1 {
   86         phy-mode = "rmii";
   87         ti,dual-emac-pvid = <1>;
   88         phy-handle = <&phy0>;
   89 };
   90 
   91 &cpsw_port2 {
   92         phy-mode = "rgmii-id";
   93         ti,dual-emac-pvid = <2>;
   94         phy-handle = <&phy1>;
   95 };

Cache object: 7454988b8f72f72f8aea45b0d52a6e74

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/am335x-netcom-plus-2xx.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/am335x-netcom-plus-2xx.dts