Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/am33xx.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Device Tree Source for AM33XX SoC 4 * 5 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 6 */ 7 8 #include <dt-bindings/bus/ti-sysc.h> 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/pinctrl/am33xx.h> 11 #include <dt-bindings/clock/am3.h> 12 13 / { 14 compatible = "ti,am33xx"; 15 interrupt-parent = <&intc>; 16 #address-cells = <1>; 17 #size-cells = <1>; 18 chosen { }; 19 20 aliases { 21 i2c0 = &i2c0; 22 i2c1 = &i2c1; 23 i2c2 = &i2c2; 24 serial0 = &uart0; 25 serial1 = &uart1; 26 serial2 = &uart2; 27 serial3 = &uart3; 28 serial4 = &uart4; 29 serial5 = &uart5; 30 d-can0 = &dcan0; 31 d-can1 = &dcan1; 32 usb0 = &usb0; 33 usb1 = &usb1; 34 phy0 = &usb0_phy; 35 phy1 = &usb1_phy; 36 ethernet0 = &cpsw_port1; 37 ethernet1 = &cpsw_port2; 38 spi0 = &spi0; 39 spi1 = &spi1; 40 mmc0 = &mmc1; 41 mmc1 = &mmc2; 42 mmc2 = &mmc3; 43 }; 44 45 cpus { 46 #address-cells = <1>; 47 #size-cells = <0>; 48 cpu@0 { 49 compatible = "arm,cortex-a8"; 50 enable-method = "ti,am3352"; 51 device_type = "cpu"; 52 reg = <0>; 53 54 operating-points-v2 = <&cpu0_opp_table>; 55 56 clocks = <&dpll_mpu_ck>; 57 clock-names = "cpu"; 58 59 clock-latency = <300000>; /* From omap-cpufreq driver */ 60 cpu-idle-states = <&mpu_gate>; 61 }; 62 63 idle-states { 64 mpu_gate: mpu_gate { 65 compatible = "arm,idle-state"; 66 entry-latency-us = <40>; 67 exit-latency-us = <90>; 68 min-residency-us = <300>; 69 ti,idle-wkup-m3; 70 }; 71 }; 72 }; 73 74 cpu0_opp_table: opp-table { 75 compatible = "operating-points-v2-ti-cpu"; 76 syscon = <&scm_conf>; 77 78 /* 79 * The three following nodes are marked with opp-suspend 80 * because the can not be enabled simultaneously on a 81 * single SoC. 82 */ 83 opp50-300000000 { 84 opp-hz = /bits/ 64 <300000000>; 85 opp-microvolt = <950000 931000 969000>; 86 opp-supported-hw = <0x06 0x0010>; 87 opp-suspend; 88 }; 89 90 opp100-275000000 { 91 opp-hz = /bits/ 64 <275000000>; 92 opp-microvolt = <1100000 1078000 1122000>; 93 opp-supported-hw = <0x01 0x00FF>; 94 opp-suspend; 95 }; 96 97 opp100-300000000 { 98 opp-hz = /bits/ 64 <300000000>; 99 opp-microvolt = <1100000 1078000 1122000>; 100 opp-supported-hw = <0x06 0x0020>; 101 opp-suspend; 102 }; 103 104 opp100-500000000 { 105 opp-hz = /bits/ 64 <500000000>; 106 opp-microvolt = <1100000 1078000 1122000>; 107 opp-supported-hw = <0x01 0xFFFF>; 108 }; 109 110 opp100-600000000 { 111 opp-hz = /bits/ 64 <600000000>; 112 opp-microvolt = <1100000 1078000 1122000>; 113 opp-supported-hw = <0x06 0x0040>; 114 }; 115 116 opp120-600000000 { 117 opp-hz = /bits/ 64 <600000000>; 118 opp-microvolt = <1200000 1176000 1224000>; 119 opp-supported-hw = <0x01 0xFFFF>; 120 }; 121 122 opp120-720000000 { 123 opp-hz = /bits/ 64 <720000000>; 124 opp-microvolt = <1200000 1176000 1224000>; 125 opp-supported-hw = <0x06 0x0080>; 126 }; 127 128 oppturbo-720000000 { 129 opp-hz = /bits/ 64 <720000000>; 130 opp-microvolt = <1260000 1234800 1285200>; 131 opp-supported-hw = <0x01 0xFFFF>; 132 }; 133 134 oppturbo-800000000 { 135 opp-hz = /bits/ 64 <800000000>; 136 opp-microvolt = <1260000 1234800 1285200>; 137 opp-supported-hw = <0x06 0x0100>; 138 }; 139 140 oppnitro-1000000000 { 141 opp-hz = /bits/ 64 <1000000000>; 142 opp-microvolt = <1325000 1298500 1351500>; 143 opp-supported-hw = <0x04 0x0200>; 144 }; 145 }; 146 147 target-module@4b000000 { 148 compatible = "ti,sysc-omap4-simple", "ti,sysc"; 149 clocks = <&l3_clkctrl AM3_L3_L3_INSTR_CLKCTRL 0>; 150 clock-names = "fck"; 151 ti,no-idle; 152 #address-cells = <1>; 153 #size-cells = <1>; 154 ranges = <0x0 0x4b000000 0x1000000>; 155 156 target-module@140000 { 157 compatible = "ti,sysc-omap4-simple", "ti,sysc"; 158 clocks = <&l3_aon_clkctrl AM3_L3_AON_DEBUGSS_CLKCTRL 0>; 159 clock-names = "fck"; 160 #address-cells = <1>; 161 #size-cells = <1>; 162 ranges = <0x0 0x140000 0xec0000>; 163 164 pmu@0 { 165 compatible = "arm,cortex-a8-pmu"; 166 interrupts = <3>; 167 }; 168 }; 169 }; 170 171 /* 172 * The soc node represents the soc top level view. It is used for IPs 173 * that are not memory mapped in the MPU view or for the MPU itself. 174 */ 175 soc { 176 compatible = "ti,omap-infra"; 177 }; 178 179 /* 180 * XXX: Use a flat representation of the AM33XX interconnect. 181 * The real AM33XX interconnect network is quite complex. Since 182 * it will not bring real advantage to represent that in DT 183 * for the moment, just use a fake OCP bus entry to represent 184 * the whole bus hierarchy. 185 */ 186 ocp: ocp { 187 compatible = "simple-pm-bus"; 188 power-domains = <&prm_per>; 189 clocks = <&l3_clkctrl AM3_L3_L3_MAIN_CLKCTRL 0>; 190 clock-names = "fck"; 191 #address-cells = <1>; 192 #size-cells = <1>; 193 ranges; 194 195 l4_wkup: interconnect@44c00000 { 196 }; 197 l4_per: interconnect@48000000 { 198 }; 199 l4_fw: interconnect@47c00000 { 200 }; 201 l4_fast: interconnect@4a000000 { 202 }; 203 l4_mpuss: interconnect@4b140000 { 204 }; 205 206 intc: interrupt-controller@48200000 { 207 compatible = "ti,am33xx-intc"; 208 interrupt-controller; 209 #interrupt-cells = <1>; 210 reg = <0x48200000 0x1000>; 211 }; 212 213 target-module@49000000 { 214 compatible = "ti,sysc-omap4", "ti,sysc"; 215 reg = <0x49000000 0x4>; 216 reg-names = "rev"; 217 clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>; 218 clock-names = "fck"; 219 #address-cells = <1>; 220 #size-cells = <1>; 221 ranges = <0x0 0x49000000 0x10000>; 222 223 edma: dma@0 { 224 compatible = "ti,edma3-tpcc"; 225 reg = <0 0x10000>; 226 reg-names = "edma3_cc"; 227 interrupts = <12 13 14>; 228 interrupt-names = "edma3_ccint", "edma3_mperr", 229 "edma3_ccerrint"; 230 dma-requests = <64>; 231 #dma-cells = <2>; 232 233 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, 234 <&edma_tptc2 0>; 235 236 ti,edma-memcpy-channels = <20 21>; 237 }; 238 }; 239 240 target-module@49800000 { 241 compatible = "ti,sysc-omap4", "ti,sysc"; 242 reg = <0x49800000 0x4>, 243 <0x49800010 0x4>; 244 reg-names = "rev", "sysc"; 245 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; 246 ti,sysc-midle = <SYSC_IDLE_FORCE>; 247 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 248 <SYSC_IDLE_SMART>; 249 clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>; 250 clock-names = "fck"; 251 #address-cells = <1>; 252 #size-cells = <1>; 253 ranges = <0x0 0x49800000 0x100000>; 254 255 edma_tptc0: dma@0 { 256 compatible = "ti,edma3-tptc"; 257 reg = <0 0x100000>; 258 interrupts = <112>; 259 interrupt-names = "edma3_tcerrint"; 260 }; 261 }; 262 263 target-module@49900000 { 264 compatible = "ti,sysc-omap4", "ti,sysc"; 265 reg = <0x49900000 0x4>, 266 <0x49900010 0x4>; 267 reg-names = "rev", "sysc"; 268 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; 269 ti,sysc-midle = <SYSC_IDLE_FORCE>; 270 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 271 <SYSC_IDLE_SMART>; 272 clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>; 273 clock-names = "fck"; 274 #address-cells = <1>; 275 #size-cells = <1>; 276 ranges = <0x0 0x49900000 0x100000>; 277 278 edma_tptc1: dma@0 { 279 compatible = "ti,edma3-tptc"; 280 reg = <0 0x100000>; 281 interrupts = <113>; 282 interrupt-names = "edma3_tcerrint"; 283 }; 284 }; 285 286 target-module@49a00000 { 287 compatible = "ti,sysc-omap4", "ti,sysc"; 288 reg = <0x49a00000 0x4>, 289 <0x49a00010 0x4>; 290 reg-names = "rev", "sysc"; 291 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; 292 ti,sysc-midle = <SYSC_IDLE_FORCE>; 293 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 294 <SYSC_IDLE_SMART>; 295 clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>; 296 clock-names = "fck"; 297 #address-cells = <1>; 298 #size-cells = <1>; 299 ranges = <0x0 0x49a00000 0x100000>; 300 301 edma_tptc2: dma@0 { 302 compatible = "ti,edma3-tptc"; 303 reg = <0 0x100000>; 304 interrupts = <114>; 305 interrupt-names = "edma3_tcerrint"; 306 }; 307 }; 308 309 target-module@47810000 { 310 compatible = "ti,sysc-omap2", "ti,sysc"; 311 reg = <0x478102fc 0x4>, 312 <0x47810110 0x4>, 313 <0x47810114 0x4>; 314 reg-names = "rev", "sysc", "syss"; 315 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | 316 SYSC_OMAP2_ENAWAKEUP | 317 SYSC_OMAP2_SOFTRESET | 318 SYSC_OMAP2_AUTOIDLE)>; 319 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 320 <SYSC_IDLE_NO>, 321 <SYSC_IDLE_SMART>; 322 ti,syss-mask = <1>; 323 clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>; 324 clock-names = "fck"; 325 #address-cells = <1>; 326 #size-cells = <1>; 327 ranges = <0x0 0x47810000 0x1000>; 328 329 mmc3: mmc@0 { 330 compatible = "ti,am335-sdhci"; 331 ti,needs-special-reset; 332 interrupts = <29>; 333 reg = <0x0 0x1000>; 334 status = "disabled"; 335 }; 336 }; 337 338 usb: target-module@47400000 { 339 compatible = "ti,sysc-omap4", "ti,sysc"; 340 reg = <0x47400000 0x4>, 341 <0x47400010 0x4>; 342 reg-names = "rev", "sysc"; 343 ti,sysc-mask = <(SYSC_OMAP4_FREEEMU | 344 SYSC_OMAP4_SOFTRESET)>; 345 ti,sysc-midle = <SYSC_IDLE_FORCE>, 346 <SYSC_IDLE_NO>, 347 <SYSC_IDLE_SMART>; 348 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 349 <SYSC_IDLE_NO>, 350 <SYSC_IDLE_SMART>, 351 <SYSC_IDLE_SMART_WKUP>; 352 clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>; 353 clock-names = "fck"; 354 #address-cells = <1>; 355 #size-cells = <1>; 356 ranges = <0x0 0x47400000 0x8000>; 357 358 usb0_phy: usb-phy@1300 { 359 compatible = "ti,am335x-usb-phy"; 360 reg = <0x1300 0x100>; 361 reg-names = "phy"; 362 ti,ctrl_mod = <&usb_ctrl_mod>; 363 #phy-cells = <0>; 364 }; 365 366 usb0: usb@1400 { 367 compatible = "ti,musb-am33xx"; 368 reg = <0x1400 0x400>, 369 <0x1000 0x200>; 370 reg-names = "mc", "control"; 371 372 interrupts = <18>; 373 interrupt-names = "mc"; 374 dr_mode = "otg"; 375 mentor,multipoint = <1>; 376 mentor,num-eps = <16>; 377 mentor,ram-bits = <12>; 378 mentor,power = <500>; 379 phys = <&usb0_phy>; 380 381 dmas = <&cppi41dma 0 0 &cppi41dma 1 0 382 &cppi41dma 2 0 &cppi41dma 3 0 383 &cppi41dma 4 0 &cppi41dma 5 0 384 &cppi41dma 6 0 &cppi41dma 7 0 385 &cppi41dma 8 0 &cppi41dma 9 0 386 &cppi41dma 10 0 &cppi41dma 11 0 387 &cppi41dma 12 0 &cppi41dma 13 0 388 &cppi41dma 14 0 &cppi41dma 0 1 389 &cppi41dma 1 1 &cppi41dma 2 1 390 &cppi41dma 3 1 &cppi41dma 4 1 391 &cppi41dma 5 1 &cppi41dma 6 1 392 &cppi41dma 7 1 &cppi41dma 8 1 393 &cppi41dma 9 1 &cppi41dma 10 1 394 &cppi41dma 11 1 &cppi41dma 12 1 395 &cppi41dma 13 1 &cppi41dma 14 1>; 396 dma-names = 397 "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", 398 "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", 399 "rx14", "rx15", 400 "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", 401 "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", 402 "tx14", "tx15"; 403 }; 404 405 usb1_phy: usb-phy@1b00 { 406 compatible = "ti,am335x-usb-phy"; 407 reg = <0x1b00 0x100>; 408 reg-names = "phy"; 409 ti,ctrl_mod = <&usb_ctrl_mod>; 410 #phy-cells = <0>; 411 }; 412 413 usb1: usb@1800 { 414 compatible = "ti,musb-am33xx"; 415 reg = <0x1c00 0x400>, 416 <0x1800 0x200>; 417 reg-names = "mc", "control"; 418 interrupts = <19>; 419 interrupt-names = "mc"; 420 dr_mode = "otg"; 421 mentor,multipoint = <1>; 422 mentor,num-eps = <16>; 423 mentor,ram-bits = <12>; 424 mentor,power = <500>; 425 phys = <&usb1_phy>; 426 427 dmas = <&cppi41dma 15 0 &cppi41dma 16 0 428 &cppi41dma 17 0 &cppi41dma 18 0 429 &cppi41dma 19 0 &cppi41dma 20 0 430 &cppi41dma 21 0 &cppi41dma 22 0 431 &cppi41dma 23 0 &cppi41dma 24 0 432 &cppi41dma 25 0 &cppi41dma 26 0 433 &cppi41dma 27 0 &cppi41dma 28 0 434 &cppi41dma 29 0 &cppi41dma 15 1 435 &cppi41dma 16 1 &cppi41dma 17 1 436 &cppi41dma 18 1 &cppi41dma 19 1 437 &cppi41dma 20 1 &cppi41dma 21 1 438 &cppi41dma 22 1 &cppi41dma 23 1 439 &cppi41dma 24 1 &cppi41dma 25 1 440 &cppi41dma 26 1 &cppi41dma 27 1 441 &cppi41dma 28 1 &cppi41dma 29 1>; 442 dma-names = 443 "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", 444 "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", 445 "rx14", "rx15", 446 "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", 447 "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", 448 "tx14", "tx15"; 449 }; 450 451 cppi41dma: dma-controller@2000 { 452 compatible = "ti,am3359-cppi41"; 453 reg = <0x0000 0x1000>, 454 <0x2000 0x1000>, 455 <0x3000 0x1000>, 456 <0x4000 0x4000>; 457 reg-names = "glue", "controller", "scheduler", "queuemgr"; 458 interrupts = <17>; 459 interrupt-names = "glue"; 460 #dma-cells = <2>; 461 /* For backwards compatibility: */ 462 #dma-channels = <30>; 463 dma-channels = <30>; 464 #dma-requests = <256>; 465 dma-requests = <256>; 466 }; 467 }; 468 469 target-module@40300000 { 470 compatible = "ti,sysc-omap4-simple", "ti,sysc"; 471 clocks = <&l3_clkctrl AM3_L3_OCMCRAM_CLKCTRL 0>; 472 clock-names = "fck"; 473 ti,no-idle; 474 #address-cells = <1>; 475 #size-cells = <1>; 476 ranges = <0 0x40300000 0x10000>; 477 478 ocmcram: sram@0 { 479 compatible = "mmio-sram"; 480 reg = <0 0x10000>; /* 64k */ 481 ranges = <0 0 0x10000>; 482 #address-cells = <1>; 483 #size-cells = <1>; 484 485 pm_sram_code: pm-code-sram@0 { 486 compatible = "ti,sram"; 487 reg = <0x0 0x1000>; 488 protect-exec; 489 }; 490 491 pm_sram_data: pm-data-sram@1000 { 492 compatible = "ti,sram"; 493 reg = <0x1000 0x1000>; 494 pool; 495 }; 496 }; 497 }; 498 499 target-module@4c000000 { 500 compatible = "ti,sysc-omap4-simple", "ti,sysc"; 501 reg = <0x4c000000 0x4>; 502 reg-names = "rev"; 503 clocks = <&l3_clkctrl AM3_L3_EMIF_CLKCTRL 0>; 504 clock-names = "fck"; 505 ti,no-idle; 506 #address-cells = <1>; 507 #size-cells = <1>; 508 ranges = <0x0 0x4c000000 0x1000000>; 509 510 emif: emif@0 { 511 compatible = "ti,emif-am3352"; 512 reg = <0 0x1000000>; 513 interrupts = <101>; 514 sram = <&pm_sram_code 515 &pm_sram_data>; 516 }; 517 }; 518 519 target-module@50000000 { 520 compatible = "ti,sysc-omap2", "ti,sysc"; 521 reg = <0x50000000 4>, 522 <0x50000010 4>, 523 <0x50000014 4>; 524 reg-names = "rev", "sysc", "syss"; 525 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 526 <SYSC_IDLE_NO>, 527 <SYSC_IDLE_SMART>; 528 ti,syss-mask = <1>; 529 clocks = <&l3s_clkctrl AM3_L3S_GPMC_CLKCTRL 0>; 530 clock-names = "fck"; 531 #address-cells = <1>; 532 #size-cells = <1>; 533 ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ 534 <0x00000000 0x00000000 0x40000000>; /* data */ 535 536 gpmc: gpmc@50000000 { 537 compatible = "ti,am3352-gpmc"; 538 reg = <0x50000000 0x2000>; 539 interrupts = <100>; 540 dmas = <&edma 52 0>; 541 dma-names = "rxtx"; 542 gpmc,num-cs = <7>; 543 gpmc,num-waitpins = <2>; 544 #address-cells = <2>; 545 #size-cells = <1>; 546 interrupt-controller; 547 #interrupt-cells = <2>; 548 gpio-controller; 549 #gpio-cells = <2>; 550 status = "disabled"; 551 }; 552 }; 553 554 sham_target: target-module@53100000 { 555 compatible = "ti,sysc-omap3-sham", "ti,sysc"; 556 reg = <0x53100100 0x4>, 557 <0x53100110 0x4>, 558 <0x53100114 0x4>; 559 reg-names = "rev", "sysc", "syss"; 560 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | 561 SYSC_OMAP2_AUTOIDLE)>; 562 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 563 <SYSC_IDLE_NO>, 564 <SYSC_IDLE_SMART>; 565 ti,syss-mask = <1>; 566 /* Domains (P, C): per_pwrdm, l3_clkdm */ 567 clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>; 568 clock-names = "fck"; 569 #address-cells = <1>; 570 #size-cells = <1>; 571 ranges = <0x0 0x53100000 0x1000>; 572 573 sham: sham@0 { 574 compatible = "ti,omap4-sham"; 575 reg = <0 0x200>; 576 interrupts = <109>; 577 dmas = <&edma 36 0>; 578 dma-names = "rx"; 579 }; 580 }; 581 582 aes_target: target-module@53500000 { 583 compatible = "ti,sysc-omap2", "ti,sysc"; 584 reg = <0x53500080 0x4>, 585 <0x53500084 0x4>, 586 <0x53500088 0x4>; 587 reg-names = "rev", "sysc", "syss"; 588 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | 589 SYSC_OMAP2_AUTOIDLE)>; 590 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 591 <SYSC_IDLE_NO>, 592 <SYSC_IDLE_SMART>, 593 <SYSC_IDLE_SMART_WKUP>; 594 ti,syss-mask = <1>; 595 /* Domains (P, C): per_pwrdm, l3_clkdm */ 596 clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>; 597 clock-names = "fck"; 598 #address-cells = <1>; 599 #size-cells = <1>; 600 ranges = <0x0 0x53500000 0x1000>; 601 602 aes: aes@0 { 603 compatible = "ti,omap4-aes"; 604 reg = <0 0xa0>; 605 interrupts = <103>; 606 dmas = <&edma 6 0>, 607 <&edma 5 0>; 608 dma-names = "tx", "rx"; 609 }; 610 }; 611 612 target-module@56000000 { 613 compatible = "ti,sysc-omap4", "ti,sysc"; 614 reg = <0x5600fe00 0x4>, 615 <0x5600fe10 0x4>; 616 reg-names = "rev", "sysc"; 617 ti,sysc-midle = <SYSC_IDLE_FORCE>, 618 <SYSC_IDLE_NO>, 619 <SYSC_IDLE_SMART>; 620 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 621 <SYSC_IDLE_NO>, 622 <SYSC_IDLE_SMART>; 623 clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>; 624 clock-names = "fck"; 625 power-domains = <&prm_gfx>; 626 resets = <&prm_gfx 0>; 627 reset-names = "rstctrl"; 628 #address-cells = <1>; 629 #size-cells = <1>; 630 ranges = <0 0x56000000 0x1000000>; 631 632 /* 633 * Closed source PowerVR driver, no child device 634 * binding or driver in mainline 635 */ 636 }; 637 }; 638 }; 639 640 #include "am33xx-l4.dtsi" 641 #include "am33xx-clocks.dtsi" 642 643 &prcm { 644 prm_per: prm@c00 { 645 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; 646 reg = <0xc00 0x100>; 647 #reset-cells = <1>; 648 #power-domain-cells = <0>; 649 }; 650 651 prm_wkup: prm@d00 { 652 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; 653 reg = <0xd00 0x100>; 654 #reset-cells = <1>; 655 #power-domain-cells = <0>; 656 }; 657 658 prm_mpu: prm@e00 { 659 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; 660 reg = <0xe00 0x100>; 661 #power-domain-cells = <0>; 662 }; 663 664 prm_device: prm@f00 { 665 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; 666 reg = <0xf00 0x100>; 667 #reset-cells = <1>; 668 }; 669 670 prm_rtc: prm@1000 { 671 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; 672 reg = <0x1000 0x100>; 673 #power-domain-cells = <0>; 674 }; 675 676 prm_gfx: prm@1100 { 677 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; 678 reg = <0x1100 0x100>; 679 #power-domain-cells = <0>; 680 #reset-cells = <1>; 681 }; 682 683 prm_cefuse: prm@1200 { 684 compatible = "ti,am3-prm-inst", "ti,omap-prm-inst"; 685 reg = <0x1200 0x100>; 686 #power-domain-cells = <0>; 687 }; 688 }; 689 690 /* Preferred always-on timer for clocksource */ 691 &timer1_target { 692 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>, 693 <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>; 694 clock-names = "fck", "ick"; 695 ti,no-reset-on-init; 696 ti,no-idle; 697 timer@0 { 698 assigned-clocks = <&timer1_fck>; 699 assigned-clock-parents = <&sys_clkin_ck>; 700 }; 701 }; 702 703 /* Preferred timer for clockevent */ 704 &timer2_target { 705 clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>, 706 <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>; 707 clock-names = "fck", "ick"; 708 ti,no-reset-on-init; 709 ti,no-idle; 710 timer@0 { 711 assigned-clocks = <&timer2_fck>; 712 assigned-clock-parents = <&sys_clkin_ck>; 713 }; 714 };
Cache object: 093ae89f3366075cbf71b8937b6b3560
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]