animeo_ip.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-only
    2 /*
    3  * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
    4  *
    5  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    6  */
    7 
    8 /dts-v1/;
    9 #include "at91sam9260.dtsi"
   10 
   11 / {
   12         model = "Somfy Animeo IP";
   13         compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
   14 
   15         aliases {
   16                 serial0 = &usart1;
   17                 serial1 = &usart2;
   18                 serial2 = &usart0;
   19                 serial3 = &dbgu;
   20                 serial4 = &usart3;
   21                 serial5 = &uart0;
   22                 serial6 = &uart1;
   23         };
   24 
   25         chosen {
   26                 stdout-path = &usart2;
   27         };
   28 
   29         memory@20000000 {
   30                 reg = <0x20000000 0x4000000>;
   31         };
   32 
   33         clocks {
   34                 slow_xtal {
   35                         clock-frequency = <32768>;
   36                 };
   37 
   38                 main_xtal {
   39                         clock-frequency = <18432000>;
   40                 };
   41         };
   42 
   43         ahb {
   44                 apb {
   45                         tcb0: timer@fffa0000 {
   46                                 timer@0 {
   47                                         compatible = "atmel,tcb-timer";
   48                                         reg = <0>, <1>;
   49                                 };
   50 
   51                                 timer@2 {
   52                                         compatible = "atmel,tcb-timer";
   53                                         reg = <2>;
   54                                 };
   55                         };
   56 
   57                         usart0: serial@fffb0000 {
   58                                 pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
   59                                 linux,rs485-enabled-at-boot-time;
   60                                 status = "okay";
   61                         };
   62 
   63                         usart1: serial@fffb4000 {
   64                                 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
   65                                 linux,rs485-enabled-at-boot-time;
   66                                 status = "okay";
   67                         };
   68 
   69                         usart2: serial@fffb8000 {
   70                                 pinctrl-0 = <&pinctrl_usart2>;
   71                                 status = "okay";
   72                         };
   73 
   74                         macb0: ethernet@fffc4000 {
   75                                 pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
   76                                 phy-mode = "mii";
   77                                 status = "okay";
   78                         };
   79 
   80                         mmc0: mmc@fffa8000 {
   81                                 pinctrl-0 = <&pinctrl_mmc0_clk
   82                                              &pinctrl_mmc0_slot1_cmd_dat0
   83                                              &pinctrl_mmc0_slot1_dat1_3>;
   84                                 pinctrl-names = "default";
   85                                 status = "okay";
   86 
   87                                 slot@1 {
   88                                         reg = <1>;
   89                                         bus-width = <4>;
   90                                 };
   91                         };
   92 
   93                         watchdog@fffffd40 {
   94                                 status = "okay";
   95                         };
   96                 };
   97 
   98                 ebi: ebi@10000000 {
   99                         status = "okay";
  100 
  101                         nand_controller: nand-controller {
  102                                 status = "okay";
  103                                 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
  104                                 pinctrl-names = "default";
  105 
  106                                 nand@3 {
  107                                         reg = <0x3 0x0 0x800000>;
  108                                         rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
  109                                         cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
  110                                         nand-bus-width = <8>;
  111                                         nand-ecc-mode = "soft";
  112                                         nand-on-flash-bbt;
  113                                         label = "atmel_nand";
  114 
  115                                         partitions {
  116                                                 compatible = "fixed-partitions";
  117                                                 #address-cells = <1>;
  118                                                 #size-cells = <1>;
  119 
  120                                                 barebox@0 {
  121                                                         label = "barebox";
  122                                                         reg = <0x0 0x58000>;
  123                                                 };
  124 
  125                                                 u_boot_env@58000 {
  126                                                         label = "u_boot_env";
  127                                                         reg = <0x58000 0x8000>;
  128                                                 };
  129 
  130                                                 ubi@60000 {
  131                                                         label = "ubi";
  132                                                         reg = <0x60000 0x1FA0000>;
  133                                                 };
  134                                         };
  135                                 };
  136                         };
  137                 };
  138 
  139                 usb0: ohci@500000 {
  140                         num-ports = <2>;
  141                         atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
  142                         status = "okay";
  143                 };
  144         };
  145 
  146         leds {
  147                 compatible = "gpio-leds";
  148 
  149                 power_green {
  150                         label = "power_green";
  151                         gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
  152                         linux,default-trigger = "heartbeat";
  153                 };
  154 
  155                 power_red {
  156                         label = "power_red";
  157                         gpios = <&pioA 2 GPIO_ACTIVE_HIGH>;
  158                 };
  159 
  160                 tx_green {
  161                         label = "tx_green";
  162                         gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
  163                 };
  164 
  165                 tx_red {
  166                         label = "tx_red";
  167                         gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
  168                 };
  169         };
  170 
  171         gpio-keys {
  172                 compatible = "gpio-keys";
  173 
  174                 key-switch-in {
  175                         label = "keyswitch_in";
  176                         gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
  177                         linux,code = <28>;
  178                         wakeup-source;
  179                 };
  180 
  181                 key-error-in {
  182                         label = "error_in";
  183                         gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
  184                         linux,code = <29>;
  185                         wakeup-source;
  186                 };
  187 
  188                 key-s {
  189                         label = "btn";
  190                         gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
  191                         linux,code = <31>;
  192                         wakeup-source;
  193                 };
  194         };
  195 };

Cache object: b25b2b1e97806c8e47a0a30f7054dce2

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/animeo_ip.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/animeo_ip.dts