armada-xp-crs326-24g-2s.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 /*
    3  * Device Tree file for CRS326-24G-2S board
    4  *
    5  * Copyright (C) 2016 Allied Telesis Labs
    6  * Copyright (C) 2020 Sartura Ltd.
    7  *
    8  * Based on armada-xp-db.dts
    9  *
   10  * Note: this Device Tree assumes that the bootloader has remapped the
   11  * internal registers to 0xf1000000 (instead of the default
   12  * 0xd0000000). The 0xf1000000 is the default used by the recent,
   13  * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
   14  * boards were delivered with an older version of the bootloader that
   15  * left internal registers mapped at 0xd0000000. If you are in this
   16  * situation, you should either update your bootloader (preferred
   17  * solution) or the below Device Tree should be adjusted.
   18  */
   19 
   20 /dts-v1/;
   21 #include "armada-xp-98dx3236.dtsi"
   22 
   23 / {
   24         model = "CRS326-24G-2S+";
   25         compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
   26 
   27         chosen {
   28                 bootargs = "console=ttyS0,115200 earlyprintk";
   29         };
   30 
   31         memory {
   32                 device_type = "memory";
   33                 reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
   34         };
   35 };
   36 
   37 &L2 {
   38         arm,parity-enable;
   39         marvell,ecc-enable;
   40 };
   41 
   42 &devbus_bootcs {
   43         status = "okay";
   44 
   45         /* Device Bus parameters are required */
   46 
   47         /* Read parameters */
   48         devbus,bus-width    = <16>;
   49         devbus,turn-off-ps  = <60000>;
   50         devbus,badr-skew-ps = <0>;
   51         devbus,acc-first-ps = <124000>;
   52         devbus,acc-next-ps  = <248000>;
   53         devbus,rd-setup-ps  = <0>;
   54         devbus,rd-hold-ps   = <0>;
   55 
   56         /* Write parameters */
   57         devbus,sync-enable = <0>;
   58         devbus,wr-high-ps  = <60000>;
   59         devbus,wr-low-ps   = <60000>;
   60         devbus,ale-wr-ps   = <60000>;
   61 };
   62 
   63 &uart0 {
   64         status = "okay";
   65 };
   66 
   67 &uart1 {
   68         status = "okay";
   69 };
   70 
   71 &i2c0 {
   72         clock-frequency = <100000>;
   73         status = "okay";
   74 };
   75 
   76 &usb0 {
   77         status = "okay";
   78 };
   79 
   80 &spi0 {
   81         status = "okay";
   82 
   83         flash@0 {
   84                 #address-cells = <1>;
   85                 #size-cells = <1>;
   86                 compatible = "jedec,spi-nor";
   87                 reg = <0>; /* Chip select 0 */
   88                 spi-max-frequency = <108000000>;
   89                 m25p,fast-read;
   90 
   91                 partition@u-boot {
   92                         reg = <0x00000000 0x001f0000>;
   93                         label = "u-boot";
   94                 };
   95                 partition@u-boot-env {
   96                         reg = <0x001f0000 0x00010000>;
   97                         label = "u-boot-env";
   98                 };
   99                 partition@ubi1 {
  100                         reg = <0x00200000 0x00e00000>;
  101                         label = "ubi1";
  102                 };
  103         };
  104 };

Cache object: adc87d3ade2d66b8672b1c63cff3f43e

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/armada-xp-crs326-24g-2s.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/armada-xp-crs326-24g-2s.dtsi