bcm2835-rpi-b.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0
    2 /dts-v1/;
    3 #include "bcm2835.dtsi"
    4 #include "bcm2835-rpi.dtsi"
    5 #include "bcm283x-rpi-smsc9512.dtsi"
    6 #include "bcm283x-rpi-usb-host.dtsi"
    7 
    8 / {
    9         compatible = "raspberrypi,model-b", "brcm,bcm2835";
   10         model = "Raspberry Pi Model B";
   11 
   12         memory@0 {
   13                 device_type = "memory";
   14                 reg = <0 0x10000000>;
   15         };
   16 
   17         leds {
   18                 led-act {
   19                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
   20                 };
   21         };
   22 };
   23 
   24 &gpio {
   25         /*
   26          * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
   27          * RPI00021 sheet 02
   28          *
   29          * Legend:
   30          * "FOO" = GPIO line named "FOO" on the schematic
   31          * "FOO_N" = GPIO line named "FOO" on schematic, active low
   32          */
   33         gpio-line-names = "SDA0",
   34                           "SCL0",
   35                           "SDA1",
   36                           "SCL1",
   37                           "GPIO_GCLK",
   38                           "CAM_GPIO1",
   39                           "LAN_RUN",
   40                           "SPI_CE1_N",
   41                           "SPI_CE0_N",
   42                           "SPI_MISO",
   43                           "SPI_MOSI",
   44                           "SPI_SCLK",
   45                           "", /* GPIO12 */
   46                           "", /* GPIO13 */
   47                           /* Serial port */
   48                           "TXD0",
   49                           "RXD0",
   50                           "STATUS_LED_N",
   51                           "GPIO17",
   52                           "GPIO18",
   53                           "", /* GPIO19 */
   54                           "", /* GPIO20 */
   55                           "CAM_GPIO0",
   56                           "GPIO22",
   57                           "GPIO23",
   58                           "GPIO24",
   59                           "GPIO25",
   60                           "", /* GPIO26 */
   61                           "GPIO27",
   62                           "GPIO28",
   63                           "GPIO29",
   64                           "GPIO30",
   65                           "GPIO31",
   66                           "", /* GPIO32 */
   67                           "", /* GPIO33 */
   68                           "", /* GPIO34 */
   69                           "", /* GPIO35 */
   70                           "", /* GPIO36 */
   71                           "", /* GPIO37 */
   72                           "", /* GPIO38 */
   73                           "", /* GPIO39 */
   74                           "PWM0_OUT",
   75                           "", /* GPIO41 */
   76                           "", /* GPIO42 */
   77                           "", /* GPIO43 */
   78                           "", /* GPIO44 */
   79                           "PWM1_OUT",
   80                           "HDMI_HPD_P",
   81                           "SD_CARD_DET",
   82                           /* Used by SD Card */
   83                           "SD_CLK_R",
   84                           "SD_CMD_R",
   85                           "SD_DATA0_R",
   86                           "SD_DATA1_R",
   87                           "SD_DATA2_R",
   88                           "SD_DATA3_R";
   89 
   90         pinctrl-0 = <&gpioout &alt0>;
   91 };
   92 
   93 &hdmi {
   94         hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
   95         power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
   96         status = "okay";
   97 };
   98 
   99 &pwm {
  100         pinctrl-names = "default";
  101         pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
  102         status = "okay";
  103 };
  104 
  105 &sdhost {
  106         pinctrl-names = "default";
  107         pinctrl-0 = <&sdhost_gpio48>;
  108         bus-width = <4>;
  109         status = "okay";
  110 };
  111 
  112 &uart0 {
  113         pinctrl-names = "default";
  114         pinctrl-0 = <&uart0_gpio14>;
  115         status = "okay";
  116 };

Cache object: 094f3e83698e19974265645e264bf951

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/bcm2835-rpi-b.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/bcm2835-rpi-b.dts