FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/bcm958625k.dts

     /*
      *  BSD LICENSE
      *
      *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
      *
      *  Redistribution and use in source and binary forms, with or without
      *  modification, are permitted provided that the following conditions
      *  are met:
      *
     *    * Redistributions of source code must retain the above copyright
     *      notice, this list of conditions and the following disclaimer.
     *    * Redistributions in binary form must reproduce the above copyright
     *      notice, this list of conditions and the following disclaimer in
     *      the documentation and/or other materials provided with the
     *      distribution.
     *    * Neither the name of Broadcom Corporation nor the names of its
     *      contributors may be used to endorse or promote products derived
     *      from this software without specific prior written permission.
     *
     *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
     *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
     *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
     *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
     *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
     *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
     *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     */
    
    /dts-v1/;
    
    #include "bcm-nsp.dtsi"
    
    / {
            model = "NorthStar Plus SVK (BCM958625K)";
            compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
    
            chosen {
                    stdout-path = "serial0:115200n8";
            };
    
            memory@60000000 {
                    device_type = "memory";
                    reg = <0x60000000 0x80000000>;
            };
    };
    
    &dma {
            status = "okay";
    };
    
    &amac0 {
            status = "okay";
    };
    
    &amac1 {
            status = "okay";
    };
    
    &amac2 {
            status = "okay";
    };
    
    &ehci0 {
            status = "okay";
    };
    
    &nand_controller {
            nand@0 {
                    compatible = "brcm,nandcs";
                    reg = <0>;
                    nand-on-flash-bbt;
    
                    #address-cells = <1>;
                    #size-cells = <1>;
    
                    nand-ecc-strength = <24>;
                    nand-ecc-step-size = <1024>;
    
                    brcm,nand-oob-sector-size = <27>;
    
                    partition@0 {
                            label = "nboot";
                            reg = <0x00000000 0x00200000>;
                            read-only;
                    };
                    partition@200000 {
                            label = "nenv";
                            reg = <0x00200000 0x00400000>;
                    };
                    partition@600000 {
                            label = "nsystem";
                            reg = <0x00600000 0x00a00000>;
                    };
                    partition@1000000 {
                            label = "nrootfs";
                           reg = <0x01000000 0x03000000>;
                   };
                   partition@4000000 {
                           label = "ncustfs";
                           reg = <0x04000000 0x3c000000>;
                   };
           };
   };
   
   &ohci0 {
           status = "okay";
   };
   
   &pcie0 {
           status = "okay";
   };
   
   &pcie1 {
           status = "okay";
   };
   
   &pcie2 {
           status = "okay";
   };
   
   &pinctrl {
           pinctrl-names = "default";
           pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>;
   
           nand_sel: nand_sel {
                   function = "nand";
                   groups = "nand_grp";
           };
   
           gpiobs: gpiobs {
                   function = "gpio_b";
                   groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp",
                            "gpio_b_3_grp";
           };
   
           pwmc: pwmc {
                   function = "pwm";
                   groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp";
           };
   
           emmc_sel: emmc_sel {
                   function = "emmc";
                   groups = "emmc_grp";
           };
   };
   
   &pwm {
           status = "okay";
   };
   
   &qspi {
           status = "okay";
           bspi-sel = <0>;
           flash: flash@0 {
                   #address-cells = <1>;
                   #size-cells = <1>;
                   compatible = "m25p80";
                   reg = <0x0>;
                   spi-max-frequency = <12500000>;
                   m25p,fast-read;
                   spi-cpol;
                   spi-cpha;
   
                   partition@0 {
                           label = "boot";
                           reg = <0x00000000 0x000a0000>;
                   };
   
                   partition@a0000 {
                           label = "env";
                           reg = <0x000a0000 0x00060000>;
                   };
   
                   partition@100000 {
                           label = "system";
                           reg = <0x00100000 0x00600000>;
                   };
   
                   partition@700000 {
                           label = "rootfs";
                           reg = <0x00700000 0x01900000>;
                   };
           };
   };
   
   &sata_phy0 {
           status = "okay";
   };
   
   &sata_phy1 {
           status = "okay";
   };
   
   &sata {
           status = "okay";
   };
   
   /*
    * By default the sd slot is functional. For emmc to work add "<&emmc_sel>"
    * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the
    * bus-width property here and disable the nand node with status = "disabled";.
    *
    * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>;
    */
   &sdio {
           bus-width = <4>;
           no-1-8-v;
           status = "okay";
   };
   
   &srab {
           compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
           status = "okay";
   
           ports {
                   port@0 {
                           label = "port0";
                           reg = <0>;
                   };
   
                   port@1 {
                           label = "port1";
                           reg = <1>;
                   };
   
                   port@2 {
                           label = "port2";
                           reg = <2>;
                   };
   
                   port@3 {
                           label = "port3";
                           reg = <3>;
                   };
   
                   port@4 {
                           label = "port4";
                           reg = <4>;
                   };
   
                   port@8 {
                           ethernet = <&amac2>;
                           label = "cpu";
                           reg = <8>;
                           fixed-link {
                                   speed = <1000>;
                                   full-duplex;
                           };
                   };
           };
   };
   
   &uart0 {
           status = "okay";
   };
   
   &uart1 {
           status = "okay";
   };
   
   &usb3_phy {
           status = "okay";
   };
   
   &xhci {
           status = "okay";
   };

Cache object: fa0d25a2f96b945a04488de7245394f2