exynos4412-galaxy-s3.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Samsung's Exynos4412 based Galaxy S3 board device tree source
    4  *
    5  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
    6  *              http://www.samsung.com
    7  */
    8 
    9 /dts-v1/;
   10 #include <dt-bindings/leds/common.h>
   11 #include "exynos4412-midas.dtsi"
   12 
   13 / {
   14         aliases {
   15                 i2c9 = &i2c_ak8975;
   16                 i2c10 = &i2c_cm36651;
   17         };
   18 
   19         led-controller {
   20                 compatible = "skyworks,aat1290";
   21                 flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
   22                 enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
   23 
   24                 pinctrl-names = "default", "host", "isp";
   25                 pinctrl-0 = <&camera_flash_host>;
   26                 pinctrl-1 = <&camera_flash_host>;
   27                 pinctrl-2 = <&camera_flash_isp>;
   28 
   29                 led {
   30                         function = LED_FUNCTION_FLASH;
   31                         color = <LED_COLOR_ID_WHITE>;
   32                         led-max-microamp = <520833>;
   33                         flash-max-microamp = <1012500>;
   34                         flash-max-timeout-us = <1940000>;
   35                 };
   36         };
   37 
   38         lcd_vdd3_reg: voltage-regulator-10 {
   39                 compatible = "regulator-fixed";
   40                 regulator-name = "LCD_VDD_2.2V";
   41                 regulator-min-microvolt = <2200000>;
   42                 regulator-max-microvolt = <2200000>;
   43                 gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
   44                 enable-active-high;
   45         };
   46 
   47         ps_als_reg: voltage-regulator-11 {
   48                 compatible = "regulator-fixed";
   49                 regulator-name = "LED_A_3.0V";
   50                 regulator-min-microvolt = <3000000>;
   51                 regulator-max-microvolt = <3000000>;
   52                 gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
   53                 enable-active-high;
   54         };
   55 
   56         i2c_ak8975: i2c-gpio-0 {
   57                 compatible = "i2c-gpio";
   58                 sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
   59                 scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
   60                 i2c-gpio,delay-us = <2>;
   61                 #address-cells = <1>;
   62                 #size-cells = <0>;
   63 
   64                 magnetometer@c {
   65                         compatible = "asahi-kasei,ak8975";
   66                         reg = <0x0c>;
   67                         gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
   68                 };
   69         };
   70 
   71         i2c_cm36651: i2c-gpio-2 {
   72                 compatible = "i2c-gpio";
   73                 sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
   74                 scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
   75                 i2c-gpio,delay-us = <2>;
   76                 #address-cells = <1>;
   77                 #size-cells = <0>;
   78 
   79                 light-sensor@18 {
   80                         compatible = "capella,cm36651";
   81                         reg = <0x18>;
   82                         interrupt-parent = <&gpx0>;
   83                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
   84                         vled-supply = <&ps_als_reg>;
   85                 };
   86         };
   87 };
   88 
   89 &buck9_reg {
   90         maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
   91 };
   92 
   93 &cam_af_reg {
   94         gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
   95         status = "okay";
   96 };
   97 
   98 &cam_io_reg {
   99         gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
  100         status = "okay";
  101 };
  102 
  103 &dsi_0 {
  104         status = "okay";
  105 
  106         panel@0 {
  107                 compatible = "samsung,s6e8aa0";
  108                 reg = <0>;
  109                 vdd3-supply = <&lcd_vdd3_reg>;
  110                 vci-supply = <&ldo25_reg>;
  111                 reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
  112                 power-on-delay = <50>;
  113                 reset-delay = <100>;
  114                 init-delay = <100>;
  115                 flip-horizontal;
  116                 flip-vertical;
  117                 panel-width-mm = <58>;
  118                 panel-height-mm = <103>;
  119 
  120                 display-timings {
  121                         timing-0 {
  122                                 clock-frequency = <57153600>;
  123                                 hactive = <720>;
  124                                 vactive = <1280>;
  125                                 hfront-porch = <5>;
  126                                 hback-porch = <5>;
  127                                 hsync-len = <5>;
  128                                 vfront-porch = <13>;
  129                                 vback-porch = <1>;
  130                                 vsync-len = <2>;
  131                         };
  132                 };
  133         };
  134 };
  135 
  136 &i2c_3 {
  137         touchscreen@48 {
  138                 compatible = "melfas,mms114";
  139                 reg = <0x48>;
  140                 interrupt-parent = <&gpm2>;
  141                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
  142                 touchscreen-size-x = <720>;
  143                 touchscreen-size-y = <1280>;
  144                 avdd-supply = <&ldo23_reg>;
  145                 vdd-supply = <&ldo24_reg>;
  146         };
  147 };
  148 
  149 &ldo25_reg {
  150         regulator-name = "LCD_VCC_3.3V";
  151         regulator-min-microvolt = <2800000>;
  152         regulator-max-microvolt = <2800000>;
  153 };
  154 
  155 &pinctrl_0 {
  156         camera_flash_host: camera-flash-host-pins {
  157                 samsung,pins = "gpj1-0";
  158                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  159                 samsung,pin-val = <0>;
  160         };
  161 
  162         camera_flash_isp: camera-flash-isp-pins {
  163                 samsung,pins = "gpj1-0";
  164                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  165                 samsung,pin-val = <1>;
  166         };
  167 };
  168 
  169 &s5c73m3 {
  170         standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
  171         vdda-supply = <&ldo17_reg>;
  172         status = "okay";
  173 };
  174 
  175 &sound {
  176         samsung,audio-routing =
  177                 "HP", "HPOUT1L",
  178                 "HP", "HPOUT1R",
  179 
  180                 "SPK", "SPKOUTLN",
  181                 "SPK", "SPKOUTLP",
  182                 "SPK", "SPKOUTRN",
  183                 "SPK", "SPKOUTRP",
  184 
  185                 "RCV", "HPOUT2N",
  186                 "RCV", "HPOUT2P",
  187 
  188                 "HDMI", "LINEOUT1N",
  189                 "HDMI", "LINEOUT1P",
  190 
  191                 "LINE", "LINEOUT2N",
  192                 "LINE", "LINEOUT2P",
  193 
  194                 "IN1LP", "MICBIAS1",
  195                 "IN1LN", "MICBIAS1",
  196                 "Main Mic", "MICBIAS1",
  197 
  198                 "IN1RP", "Sub Mic",
  199                 "IN1RN", "Sub Mic",
  200 
  201                 "IN2LP:VXRN", "MICBIAS2",
  202                 "Headset Mic", "MICBIAS2",
  203 
  204                 "IN2RN", "FM In",
  205                 "IN2RP:VXRP", "FM In";
  206 };
  207 
  208 &submic_bias_reg {
  209         gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>;
  210         enable-active-high;
  211 };
  212 
  213 &touchkey_reg {
  214         gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
  215         status = "okay";
  216 };

Cache object: e117027cd6efb7a15ba0842af0bcdd00

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/exynos4412-galaxy-s3.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/exynos4412-galaxy-s3.dtsi