exynos4412-midas.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Samsung's Exynos4412 based Trats 2 board device tree source
    4  *
    5  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
    6  *              http://www.samsung.com
    7  *
    8  * Device tree source file for Samsung's Trats 2 board which is based on
    9  * Samsung's Exynos4412 SoC.
   10  */
   11 
   12 /dts-v1/;
   13 #include "exynos4412.dtsi"
   14 #include "exynos4412-ppmu-common.dtsi"
   15 
   16 #include <dt-bindings/gpio/gpio.h>
   17 #include <dt-bindings/input/input.h>
   18 #include <dt-bindings/interrupt-controller/irq.h>
   19 #include <dt-bindings/clock/maxim,max77686.h>
   20 #include "exynos-pinctrl.h"
   21 
   22 / {
   23         compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
   24 
   25         aliases {
   26                 i2c11 = &i2c_max77693;
   27                 i2c12 = &i2c_max77693_fuel;
   28         };
   29 
   30         chosen {
   31                 stdout-path = &serial_2;
   32         };
   33 
   34         firmware@204f000 {
   35                 compatible = "samsung,secure-firmware";
   36                 reg = <0x0204F000 0x1000>;
   37         };
   38 
   39         fixed-rate-clocks {
   40                 xxti {
   41                         compatible = "samsung,clock-xxti";
   42                         clock-frequency = <0>;
   43                 };
   44 
   45                 xusbxti {
   46                         compatible = "samsung,clock-xusbxti";
   47                         clock-frequency = <24000000>;
   48                 };
   49         };
   50 
   51         cam_io_reg: voltage-regulator-1 {
   52                 compatible = "regulator-fixed";
   53                 regulator-name = "CAM_SENSOR_A";
   54                 regulator-min-microvolt = <2800000>;
   55                 regulator-max-microvolt = <2800000>;
   56                 enable-active-high;
   57                 status = "disabled";
   58         };
   59 
   60         cam_af_reg: voltage-regulator-2 {
   61                 compatible = "regulator-fixed";
   62                 regulator-name = "CAM_AF";
   63                 regulator-min-microvolt = <2800000>;
   64                 regulator-max-microvolt = <2800000>;
   65                 enable-active-high;
   66                 status = "disabled";
   67         };
   68 
   69         vsil12: voltage-regulator-3 {
   70                 compatible = "regulator-fixed";
   71                 regulator-name = "VSIL_1.2V";
   72                 regulator-min-microvolt = <1200000>;
   73                 regulator-max-microvolt = <1200000>;
   74                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
   75                 enable-active-high;
   76                 vin-supply = <&buck7_reg>;
   77         };
   78 
   79         vcc33mhl: voltage-regulator-4 {
   80                 compatible = "regulator-fixed";
   81                 regulator-name = "VCC_3.3_MHL";
   82                 regulator-min-microvolt = <3300000>;
   83                 regulator-max-microvolt = <3300000>;
   84                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
   85                 enable-active-high;
   86         };
   87 
   88         vcc18mhl: voltage-regulator-5 {
   89                 compatible = "regulator-fixed";
   90                 regulator-name = "VCC_1.8_MHL";
   91                 regulator-min-microvolt = <1800000>;
   92                 regulator-max-microvolt = <1800000>;
   93                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
   94                 enable-active-high;
   95         };
   96 
   97         touchkey_reg: voltage-regulator-6 {
   98                 compatible = "regulator-fixed";
   99                 regulator-name = "LED_VDD_3.3V";
  100                 regulator-min-microvolt = <3300000>;
  101                 regulator-max-microvolt = <3300000>;
  102                 enable-active-high;
  103                 status = "disabled";
  104         };
  105 
  106         vbatt_reg: voltage-regulator-7 {
  107                 compatible = "regulator-fixed";
  108                 regulator-name = "VBATT";
  109                 regulator-min-microvolt = <5000000>;
  110                 regulator-max-microvolt = <5000000>;
  111                 regulator-always-on;
  112         };
  113 
  114         mic_bias_reg: voltage-regulator-8 {
  115                 compatible = "regulator-fixed";
  116                 regulator-name = "MICBIAS_LDO_2.8V";
  117                 regulator-min-microvolt = <2800000>;
  118                 regulator-max-microvolt = <2800000>;
  119                 gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
  120                 enable-active-high;
  121         };
  122 
  123         submic_bias_reg: voltage-regulator-9 {
  124                 compatible = "regulator-fixed";
  125                 regulator-name = "SUB_MICBIAS_LDO_2.8V";
  126                 regulator-min-microvolt = <2800000>;
  127                 regulator-max-microvolt = <2800000>;
  128         };
  129 
  130         gpio-keys {
  131                 compatible = "gpio-keys";
  132                 pinctrl-names = "default";
  133                 pinctrl-0 = <&gpio_keys>;
  134 
  135                 key-down {
  136                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
  137                         linux,code = <114>;
  138                         label = "volume down";
  139                         debounce-interval = <10>;
  140                 };
  141 
  142                 key-up {
  143                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
  144                         linux,code = <115>;
  145                         label = "volume up";
  146                         debounce-interval = <10>;
  147                 };
  148 
  149                 key-power {
  150                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
  151                         linux,code = <116>;
  152                         label = "power";
  153                         debounce-interval = <10>;
  154                         wakeup-source;
  155                 };
  156 
  157                 key-ok {
  158                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
  159                         linux,code = <139>;
  160                         label = "ok";
  161                         debounce-interval = <10>;
  162                         wakeup-source;
  163                 };
  164         };
  165 
  166         i2c_max77693: i2c-gpio-1 {
  167                 compatible = "i2c-gpio";
  168                 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  169                 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  170                 i2c-gpio,delay-us = <2>;
  171                 #address-cells = <1>;
  172                 #size-cells = <0>;
  173 
  174                 pmic@66 {
  175                         compatible = "maxim,max77693";
  176                         interrupt-parent = <&gpx1>;
  177                         interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
  178                         pinctrl-names = "default";
  179                         pinctrl-0 = <&max77693_irq>;
  180                         reg = <0x66>;
  181 
  182                         regulators {
  183                                 esafeout1_reg: ESAFEOUT1 {
  184                                         regulator-name = "ESAFEOUT1";
  185                                 };
  186                                 esafeout2_reg: ESAFEOUT2 {
  187                                         regulator-name = "ESAFEOUT2";
  188                                 };
  189                                 charger_reg: CHARGER {
  190                                         regulator-name = "CHARGER";
  191                                         regulator-min-microamp = <60000>;
  192                                         regulator-max-microamp = <2580000>;
  193                                 };
  194                         };
  195 
  196                         motor-driver {
  197                                 compatible = "maxim,max77693-haptic";
  198                                 haptic-supply = <&ldo26_reg>;
  199                                 pwms = <&pwm 0 38022 0>;
  200                         };
  201 
  202                         charger {
  203                                 compatible = "maxim,max77693-charger";
  204 
  205                                 maxim,constant-microvolt = <4350000>;
  206                                 maxim,min-system-microvolt = <3600000>;
  207                                 maxim,thermal-regulation-celsius = <100>;
  208                                 maxim,battery-overcurrent-microamp = <3500000>;
  209                                 maxim,charge-input-threshold-microvolt = <4300000>;
  210                         };
  211                 };
  212         };
  213 
  214         i2c_max77693_fuel: i2c-gpio-3 {
  215                 compatible = "i2c-gpio";
  216                 sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  217                 scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  218                 i2c-gpio,delay-us = <2>;
  219                 #address-cells = <1>;
  220                 #size-cells = <0>;
  221 
  222                 fuel-gauge@36 {
  223                         compatible = "maxim,max17047";
  224                         interrupt-parent = <&gpx2>;
  225                         interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
  226                         pinctrl-names = "default";
  227                         pinctrl-0 = <&max77693_fuel_irq>;
  228                         reg = <0x36>;
  229 
  230                         maxim,over-heat-temp = <700>;
  231                         maxim,over-volt = <4500>;
  232                 };
  233         };
  234 
  235         i2c-gpio-4 {
  236                 compatible = "i2c-gpio";
  237                 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  238                 scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  239                 i2c-gpio,delay-us = <2>;
  240                 #address-cells = <1>;
  241                 #size-cells = <0>;
  242 
  243                 touchkey@20 {
  244                         compatible = "cypress,midas-touchkey";
  245                         reg = <0x20>;
  246                         vdd-supply = <&touchkey_reg>;
  247                         vcc-supply = <&ldo5_reg>;
  248                         interrupt-parent = <&gpj0>;
  249                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
  250                         linux,keycodes = <KEY_BACK KEY_MENU>;
  251                 };
  252         };
  253 
  254         i2c-mhl {
  255                 compatible = "i2c-gpio";
  256                 sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  257                 scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  258                 i2c-gpio,delay-us = <100>;
  259                 #address-cells = <1>;
  260                 #size-cells = <0>;
  261 
  262                 pinctrl-0 = <&i2c_mhl_bus>;
  263                 pinctrl-names = "default";
  264 
  265                 sii9234: hdmi-bridge@39 {
  266                         compatible = "sil,sii9234";
  267                         avcc33-supply = <&vcc33mhl>;
  268                         iovcc18-supply = <&vcc18mhl>;
  269                         avcc12-supply = <&vsil12>;
  270                         cvcc12-supply = <&vsil12>;
  271                         reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
  272                         interrupt-parent = <&gpf3>;
  273                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
  274                         reg = <0x39>;
  275 
  276                         port {
  277                                 mhl_to_hdmi: endpoint {
  278                                         remote-endpoint = <&hdmi_to_mhl>;
  279                                 };
  280                         };
  281                 };
  282         };
  283 
  284         wlan_pwrseq: sdhci3-pwrseq {
  285                 compatible = "mmc-pwrseq-simple";
  286                 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
  287                 clocks = <&max77686 MAX77686_CLK_PMIC>;
  288                 clock-names = "ext_clock";
  289         };
  290 
  291         sound: sound {
  292                 compatible = "samsung,midas-audio";
  293                 model = "Midas";
  294                 mic-bias-supply = <&mic_bias_reg>;
  295                 submic-bias-supply = <&submic_bias_reg>;
  296 
  297                 cpu {
  298                         sound-dai = <&i2s0 0>;
  299                 };
  300                 codec {
  301                         sound-dai = <&wm1811>;
  302                 };
  303         };
  304 
  305         thermistor-ap {
  306                 compatible = "murata,ncp15wb473";
  307                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
  308                 pullup-ohm = <100000>;   /* 100K */
  309                 pulldown-ohm = <100000>; /* 100K */
  310                 io-channels = <&adc 1>;  /* AP temperature */
  311         };
  312 
  313         thermistor-battery {
  314                 compatible = "murata,ncp15wb473";
  315                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
  316                 pullup-ohm = <100000>;   /* 100K */
  317                 pulldown-ohm = <100000>; /* 100K */
  318                 io-channels = <&adc 2>;  /* Battery temperature */
  319         };
  320 };
  321 
  322 &adc {
  323         vdd-supply = <&ldo3_reg>;
  324         status = "okay";
  325 };
  326 
  327 &bus_dmc {
  328         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
  329         vdd-supply = <&buck1_reg>;
  330         status = "okay";
  331 };
  332 
  333 &bus_acp {
  334         devfreq = <&bus_dmc>;
  335         status = "okay";
  336 };
  337 
  338 &bus_c2c {
  339         devfreq = <&bus_dmc>;
  340         status = "okay";
  341 };
  342 
  343 &bus_leftbus {
  344         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
  345         vdd-supply = <&buck3_reg>;
  346         status = "okay";
  347 };
  348 
  349 &bus_rightbus {
  350         devfreq = <&bus_leftbus>;
  351         status = "okay";
  352 };
  353 
  354 &bus_display {
  355         devfreq = <&bus_leftbus>;
  356         status = "okay";
  357 };
  358 
  359 &bus_fsys {
  360         devfreq = <&bus_leftbus>;
  361         status = "okay";
  362 };
  363 
  364 &bus_peri {
  365         devfreq = <&bus_leftbus>;
  366         status = "okay";
  367 };
  368 
  369 &bus_mfc {
  370         devfreq = <&bus_leftbus>;
  371         status = "okay";
  372 };
  373 
  374 &camera {
  375         pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
  376         pinctrl-names = "default";
  377         status = "okay";
  378         assigned-clocks = <&clock CLK_MOUT_CAM0>,
  379                 <&clock CLK_MOUT_CAM1>;
  380         assigned-clock-parents = <&clock CLK_XUSBXTI>,
  381                 <&clock CLK_XUSBXTI>;
  382 };
  383 
  384 &cpu0 {
  385         cpu0-supply = <&buck2_reg>;
  386 };
  387 
  388 &cpu_thermal {
  389         cooling-maps {
  390                 map0 {
  391                         /* Corresponds to 800MHz at freq_table */
  392                         cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
  393                                          <&cpu2 7 7>, <&cpu3 7 7>;
  394                 };
  395                 map1 {
  396                         /* Corresponds to 200MHz at freq_table */
  397                         cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
  398                                          <&cpu2 13 13>, <&cpu3 13 13>;
  399                 };
  400         };
  401 };
  402 
  403 &csis_0 {
  404         status = "okay";
  405         vddcore-supply = <&ldo8_reg>;
  406         vddio-supply = <&ldo10_reg>;
  407         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
  408                         <&clock CLK_SCLK_CSIS0>;
  409         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
  410         assigned-clock-rates = <0>, <176000000>;
  411 
  412         /* Camera C (3) MIPI CSI-2 (CSIS0) */
  413         port@3 {
  414                 reg = <3>;
  415                 csis0_ep: endpoint {
  416                         remote-endpoint = <&s5c73m3_ep>;
  417                         data-lanes = <1 2 3 4>;
  418                         samsung,csis-hs-settle = <12>;
  419                 };
  420         };
  421 };
  422 
  423 &csis_1 {
  424         status = "okay";
  425         vddcore-supply = <&ldo8_reg>;
  426         vddio-supply = <&ldo10_reg>;
  427         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
  428                         <&clock CLK_SCLK_CSIS1>;
  429         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
  430         assigned-clock-rates = <0>, <176000000>;
  431 
  432         /* Camera D (4) MIPI CSI-2 (CSIS1) */
  433         port@4 {
  434                 reg = <4>;
  435                 csis1_ep: endpoint {
  436                         remote-endpoint = <&is_s5k6a3_ep>;
  437                         data-lanes = <1>;
  438                         samsung,csis-hs-settle = <18>;
  439                         samsung,csis-wclk;
  440                 };
  441         };
  442 };
  443 
  444 &dsi_0 {
  445         vddcore-supply = <&ldo8_reg>;
  446         vddio-supply = <&ldo10_reg>;
  447         samsung,burst-clock-frequency = <500000000>;
  448         samsung,esc-clock-frequency = <20000000>;
  449         samsung,pll-clock-frequency = <24000000>;
  450 };
  451 
  452 &exynos_usbphy {
  453         vbus-supply = <&esafeout1_reg>;
  454         status = "okay";
  455 };
  456 
  457 &fimc_0 {
  458         status = "okay";
  459         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
  460                         <&clock CLK_SCLK_FIMC0>;
  461         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
  462         assigned-clock-rates = <0>, <176000000>;
  463 };
  464 
  465 &fimc_1 {
  466         status = "okay";
  467         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
  468                         <&clock CLK_SCLK_FIMC1>;
  469         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
  470         assigned-clock-rates = <0>, <176000000>;
  471 };
  472 
  473 &fimc_2 {
  474         status = "okay";
  475         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
  476                         <&clock CLK_SCLK_FIMC2>;
  477         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
  478         assigned-clock-rates = <0>, <176000000>;
  479 };
  480 
  481 &fimc_3 {
  482         status = "okay";
  483         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
  484                         <&clock CLK_SCLK_FIMC3>;
  485         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
  486         assigned-clock-rates = <0>, <176000000>;
  487 };
  488 
  489 &fimc_is {
  490         pinctrl-0 = <&fimc_is_uart>;
  491         pinctrl-names = "default";
  492         status = "okay";
  493 
  494         };
  495 
  496 &fimc_lite_0 {
  497         status = "okay";
  498 };
  499 
  500 &fimc_lite_1 {
  501         status = "okay";
  502 };
  503 
  504 &fimd {
  505         status = "okay";
  506 };
  507 
  508 &gpu {
  509         mali-supply = <&buck4_reg>;
  510         status = "okay";
  511 };
  512 
  513 &hdmi {
  514         hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
  515         pinctrl-names = "default";
  516         pinctrl-0 = <&hdmi_hpd>;
  517         vdd-supply = <&ldo3_reg>;
  518         vdd_osc-supply = <&ldo4_reg>;
  519         vdd_pll-supply = <&ldo3_reg>;
  520         ddc = <&i2c_5>;
  521         status = "okay";
  522 
  523         ports {
  524                 #address-cells = <1>;
  525                 #size-cells = <0>;
  526 
  527                 port@1 {
  528                         reg = <1>;
  529                         hdmi_to_mhl: endpoint {
  530                                 remote-endpoint = <&mhl_to_hdmi>;
  531                         };
  532                 };
  533         };
  534 };
  535 
  536 &hsotg {
  537         vusb_d-supply = <&ldo15_reg>;
  538         vusb_a-supply = <&ldo12_reg>;
  539         dr_mode = "peripheral";
  540         status = "okay";
  541 };
  542 
  543 &i2c_0 {
  544         samsung,i2c-sda-delay = <100>;
  545         samsung,i2c-slave-addr = <0x10>;
  546         samsung,i2c-max-bus-freq = <400000>;
  547         pinctrl-0 = <&i2c0_bus>;
  548         pinctrl-names = "default";
  549         status = "okay";
  550 
  551         s5c73m3: image-sensor@3c {
  552                 compatible = "samsung,s5c73m3";
  553                 reg = <0x3c>;
  554                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
  555                 vdd-int-supply = <&buck9_reg>;
  556                 vddio-cis-supply = <&ldo9_reg>;
  557                 vddio-host-supply = <&ldo18_reg>;
  558                 vdd-af-supply = <&cam_af_reg>;
  559                 vdd-reg-supply = <&cam_io_reg>;
  560                 clock-frequency = <24000000>;
  561                 /* CAM_A_CLKOUT */
  562                 clocks = <&camera 0>;
  563                 clock-names = "cis_extclk";
  564                 status = "disabled";
  565                 port {
  566                         s5c73m3_ep: endpoint {
  567                                 remote-endpoint = <&csis0_ep>;
  568                                 data-lanes = <1 2 3 4>;
  569                         };
  570                 };
  571         };
  572 };
  573 
  574 &i2c1_isp {
  575         pinctrl-0 = <&fimc_is_i2c1>;
  576         pinctrl-names = "default";
  577 
  578         image-sensor@10 {
  579                 compatible = "samsung,s5k6a3";
  580                 reg = <0x10>;
  581                 svdda-supply = <&cam_io_reg>;
  582                 svddio-supply = <&ldo19_reg>;
  583                 afvdd-supply = <&ldo19_reg>;
  584                 clock-frequency = <24000000>;
  585                 /* CAM_B_CLKOUT */
  586                 clocks = <&camera 1>;
  587                 clock-names = "extclk";
  588                 samsung,camclk-out = <1>;
  589                 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
  590 
  591                 port {
  592                         is_s5k6a3_ep: endpoint {
  593                                 remote-endpoint = <&csis1_ep>;
  594                                 data-lanes = <1>;
  595                         };
  596                 };
  597         };
  598 };
  599 
  600 &i2c_3 {
  601         samsung,i2c-sda-delay = <100>;
  602         samsung,i2c-slave-addr = <0x10>;
  603         samsung,i2c-max-bus-freq = <400000>;
  604         pinctrl-0 = <&i2c3_bus>;
  605         pinctrl-names = "default";
  606         status = "okay";
  607 };
  608 
  609 &i2c_4 {
  610         samsung,i2c-sda-delay = <100>;
  611         samsung,i2c-slave-addr = <0x10>;
  612         samsung,i2c-max-bus-freq = <100000>;
  613         pinctrl-0 = <&i2c4_bus>;
  614         pinctrl-names = "default";
  615         status = "okay";
  616 
  617         wm1811: audio-codec@1a {
  618                 compatible = "wlf,wm1811";
  619                 reg = <0x1a>;
  620                 clocks = <&pmu_system_controller 0>,
  621                         <&max77686 MAX77686_CLK_PMIC>;
  622                 clock-names = "MCLK1", "MCLK2";
  623                 interrupt-controller;
  624                 #interrupt-cells = <2>;
  625                 interrupt-parent = <&gpx3>;
  626                 interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
  627 
  628                 gpio-controller;
  629                 #gpio-cells = <2>;
  630                 #sound-dai-cells = <0>;
  631 
  632                 wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
  633                         0x0 0x8000 0x0 0x0 0x0>;
  634                 wlf,micbias-cfg = <0x2f 0x2b>;
  635 
  636                 wlf,lineout1-feedback;
  637                 wlf,lineout1-se;
  638                 wlf,lineout2-se;
  639                 wlf,ldoena-always-driven;
  640 
  641                 AVDD2-supply = <&vbatt_reg>;
  642                 DBVDD1-supply = <&ldo3_reg>;
  643                 DBVDD2-supply = <&vbatt_reg>;
  644                 DBVDD3-supply = <&vbatt_reg>;
  645                 DCVDD-supply = <&ldo3_reg>;
  646                 CPVDD-supply = <&vbatt_reg>;
  647                 SPKVDD1-supply = <&vbatt_reg>;
  648                 SPKVDD2-supply = <&vbatt_reg>;
  649                 wlf,ldo1ena = <&gpj0 4 0>;
  650                 wlf,ldo2ena = <&gpj0 4 0>;
  651         };
  652 };
  653 
  654 &i2c_5 {
  655         status = "okay";
  656 };
  657 
  658 &i2c_7 {
  659         samsung,i2c-sda-delay = <100>;
  660         samsung,i2c-slave-addr = <0x10>;
  661         samsung,i2c-max-bus-freq = <100000>;
  662         pinctrl-0 = <&i2c7_bus>;
  663         pinctrl-names = "default";
  664         status = "okay";
  665 
  666         max77686: pmic@9 {
  667                 compatible = "maxim,max77686";
  668                 interrupt-parent = <&gpx0>;
  669                 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
  670                 pinctrl-0 = <&max77686_irq>;
  671                 pinctrl-names = "default";
  672                 wakeup-source;
  673                 reg = <0x09>;
  674                 #clock-cells = <1>;
  675 
  676                 voltage-regulators {
  677                         ldo1_reg: LDO1 {
  678                                 regulator-name = "VALIVE_1.0V_AP";
  679                                 regulator-min-microvolt = <1000000>;
  680                                 regulator-max-microvolt = <1000000>;
  681                                 regulator-always-on;
  682                         };
  683 
  684                         ldo2_reg: LDO2 {
  685                                 regulator-name = "VM1M2_1.2V_AP";
  686                                 regulator-min-microvolt = <1200000>;
  687                                 regulator-max-microvolt = <1200000>;
  688                                 regulator-always-on;
  689                                 regulator-state-mem {
  690                                         regulator-on-in-suspend;
  691                                 };
  692                         };
  693 
  694                         ldo3_reg: LDO3 {
  695                                 regulator-name = "VCC_1.8V_AP";
  696                                 regulator-min-microvolt = <1800000>;
  697                                 regulator-max-microvolt = <1800000>;
  698                                 regulator-always-on;
  699                         };
  700 
  701                         ldo4_reg: LDO4 {
  702                                 regulator-name = "VCC_2.8V_AP";
  703                                 regulator-min-microvolt = <2800000>;
  704                                 regulator-max-microvolt = <2800000>;
  705                                 regulator-always-on;
  706                         };
  707 
  708                         ldo5_reg: LDO5 {
  709                                 regulator-name = "VCC_1.8V_IO";
  710                                 regulator-min-microvolt = <1800000>;
  711                                 regulator-max-microvolt = <1800000>;
  712                                 regulator-always-on;
  713                         };
  714 
  715                         ldo6_reg: LDO6 {
  716                                 regulator-name = "VMPLL_1.0V_AP";
  717                                 regulator-min-microvolt = <1000000>;
  718                                 regulator-max-microvolt = <1000000>;
  719                                 regulator-always-on;
  720                                 regulator-state-mem {
  721                                         regulator-on-in-suspend;
  722                                 };
  723                         };
  724 
  725                         ldo7_reg: LDO7 {
  726                                 regulator-name = "VPLL_1.0V_AP";
  727                                 regulator-min-microvolt = <1000000>;
  728                                 regulator-max-microvolt = <1000000>;
  729                                 regulator-always-on;
  730                                 regulator-state-mem {
  731                                         regulator-on-in-suspend;
  732                                 };
  733                         };
  734 
  735                         ldo8_reg: LDO8 {
  736                                 regulator-name = "VMIPI_1.0V";
  737                                 regulator-min-microvolt = <1000000>;
  738                                 regulator-max-microvolt = <1000000>;
  739                                 regulator-state-mem {
  740                                         regulator-off-in-suspend;
  741                                 };
  742                         };
  743 
  744                         ldo9_reg: LDO9 {
  745                                 regulator-name = "CAM_ISP_MIPI_1.2V";
  746                                 regulator-min-microvolt = <1200000>;
  747                                 regulator-max-microvolt = <1200000>;
  748                         };
  749 
  750                         ldo10_reg: LDO10 {
  751                                 regulator-name = "VMIPI_1.8V";
  752                                 regulator-min-microvolt = <1800000>;
  753                                 regulator-max-microvolt = <1800000>;
  754                                 regulator-state-mem {
  755                                         regulator-off-in-suspend;
  756                                 };
  757                         };
  758 
  759                         ldo11_reg: LDO11 {
  760                                 regulator-name = "VABB1_1.95V";
  761                                 regulator-min-microvolt = <1950000>;
  762                                 regulator-max-microvolt = <1950000>;
  763                                 regulator-always-on;
  764                                 regulator-state-mem {
  765                                         regulator-off-in-suspend;
  766                                 };
  767                         };
  768 
  769                         ldo12_reg: LDO12 {
  770                                 regulator-name = "VUOTG_3.0V";
  771                                 regulator-min-microvolt = <3000000>;
  772                                 regulator-max-microvolt = <3000000>;
  773                                 regulator-state-mem {
  774                                         regulator-off-in-suspend;
  775                                 };
  776                         };
  777 
  778                         ldo13_reg: LDO13 {
  779                                 regulator-name = "NFC_AVDD_1.8V";
  780                                 regulator-min-microvolt = <1800000>;
  781                                 regulator-max-microvolt = <1800000>;
  782                         };
  783 
  784                         ldo14_reg: LDO14 {
  785                                 regulator-name = "VABB2_1.95V";
  786                                 regulator-min-microvolt = <1950000>;
  787                                 regulator-max-microvolt = <1950000>;
  788                                 regulator-always-on;
  789                                 regulator-state-mem {
  790                                         regulator-off-in-suspend;
  791                                 };
  792                         };
  793 
  794                         ldo15_reg: LDO15 {
  795                                 regulator-name = "VHSIC_1.0V";
  796                                 regulator-min-microvolt = <1000000>;
  797                                 regulator-max-microvolt = <1000000>;
  798                                 regulator-state-mem {
  799                                         regulator-on-in-suspend;
  800                                 };
  801                         };
  802 
  803                         ldo16_reg: LDO16 {
  804                                 regulator-name = "VHSIC_1.8V";
  805                                 regulator-min-microvolt = <1800000>;
  806                                 regulator-max-microvolt = <1800000>;
  807                                 regulator-state-mem {
  808                                         regulator-on-in-suspend;
  809                                 };
  810                         };
  811 
  812                         ldo17_reg: LDO17 {
  813                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
  814                                 regulator-min-microvolt = <1200000>;
  815                                 regulator-max-microvolt = <1200000>;
  816                         };
  817 
  818                         ldo18_reg: LDO18 {
  819                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
  820                                 regulator-min-microvolt = <1800000>;
  821                                 regulator-max-microvolt = <1800000>;
  822                         };
  823 
  824                         ldo19_reg: LDO19 {
  825                                 regulator-name = "VT_CAM_1.8V";
  826                                 regulator-min-microvolt = <1800000>;
  827                                 regulator-max-microvolt = <1800000>;
  828                         };
  829 
  830                         ldo20_reg: LDO20 {
  831                                 regulator-name = "VDDQ_PRE_1.8V";
  832                                 regulator-min-microvolt = <1800000>;
  833                                 regulator-max-microvolt = <1800000>;
  834                         };
  835 
  836                         ldo21_reg: LDO21 {
  837                                 regulator-name = "VTF_2.8V";
  838                                 regulator-min-microvolt = <2800000>;
  839                                 regulator-max-microvolt = <2800000>;
  840                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
  841                         };
  842 
  843                         ldo22_reg: LDO22 {
  844                                 regulator-name = "VMEM_VDD_2.8V";
  845                                 regulator-min-microvolt = <2800000>;
  846                                 regulator-max-microvolt = <2800000>;
  847                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
  848                         };
  849 
  850                         ldo23_reg: LDO23 {
  851                                 regulator-name = "TSP_AVDD_3.3V";
  852                                 regulator-min-microvolt = <3300000>;
  853                                 regulator-max-microvolt = <3300000>;
  854                         };
  855 
  856                         ldo24_reg: LDO24 {
  857                                 regulator-name = "TSP_VDD_1.8V";
  858                                 regulator-min-microvolt = <1800000>;
  859                                 regulator-max-microvolt = <1800000>;
  860                         };
  861 
  862                         ldo25_reg: LDO25 {
  863                                 regulator-name = "LDO25";
  864                         };
  865 
  866                         ldo26_reg: LDO26 {
  867                                 regulator-name = "MOTOR_VCC_3.0V";
  868                                 regulator-min-microvolt = <3000000>;
  869                                 regulator-max-microvolt = <3000000>;
  870                         };
  871 
  872                         buck1_reg: BUCK1 {
  873                                 regulator-name = "VDD_MIF";
  874                                 regulator-min-microvolt = <850000>;
  875                                 regulator-max-microvolt = <1100000>;
  876                                 regulator-always-on;
  877                                 regulator-boot-on;
  878                                 regulator-state-mem {
  879                                         regulator-off-in-suspend;
  880                                 };
  881                         };
  882 
  883                         buck2_reg: BUCK2 {
  884                                 regulator-name = "VDD_ARM";
  885                                 regulator-min-microvolt = <850000>;
  886                                 regulator-max-microvolt = <1500000>;
  887                                 regulator-always-on;
  888                                 regulator-boot-on;
  889                                 regulator-state-mem {
  890                                         regulator-on-in-suspend;
  891                                 };
  892                         };
  893 
  894                         buck3_reg: BUCK3 {
  895                                 regulator-name = "VDD_INT";
  896                                 regulator-min-microvolt = <850000>;
  897                                 regulator-max-microvolt = <1150000>;
  898                                 regulator-always-on;
  899                                 regulator-boot-on;
  900                                 regulator-state-mem {
  901                                         regulator-off-in-suspend;
  902                                 };
  903                         };
  904 
  905                         buck4_reg: BUCK4 {
  906                                 regulator-name = "VDD_G3D";
  907                                 regulator-min-microvolt = <850000>;
  908                                 regulator-max-microvolt = <1150000>;
  909                                 regulator-boot-on;
  910                                 regulator-state-mem {
  911                                         regulator-off-in-suspend;
  912                                 };
  913                         };
  914 
  915                         buck5_reg: BUCK5 {
  916                                 regulator-name = "VMEM_1.2V_AP";
  917                                 regulator-min-microvolt = <1200000>;
  918                                 regulator-max-microvolt = <1200000>;
  919                                 regulator-always-on;
  920                         };
  921 
  922                         buck6_reg: BUCK6 {
  923                                 regulator-name = "VCC_SUB_1.35V";
  924                                 regulator-min-microvolt = <1350000>;
  925                                 regulator-max-microvolt = <1350000>;
  926                                 regulator-always-on;
  927                         };
  928 
  929                         buck7_reg: BUCK7 {
  930                                 regulator-name = "VCC_SUB_2.0V";
  931                                 regulator-min-microvolt = <2000000>;
  932                                 regulator-max-microvolt = <2000000>;
  933                                 regulator-always-on;
  934                         };
  935 
  936                         buck8_reg: BUCK8 {
  937                                 regulator-name = "VMEM_VDDF_3.0V";
  938                                 regulator-min-microvolt = <2850000>;
  939                                 regulator-max-microvolt = <2850000>;
  940                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
  941                         };
  942 
  943                         buck9_reg: BUCK9 {
  944                                 regulator-name = "CAM_ISP_CORE_1.2V";
  945                                 regulator-min-microvolt = <1000000>;
  946                                 regulator-max-microvolt = <1200000>;
  947                         };
  948                 };
  949         };
  950 };
  951 
  952 &i2c_8 {
  953         status = "okay";
  954 };
  955 
  956 &i2s0 {
  957         pinctrl-0 = <&i2s0_bus>;
  958         pinctrl-names = "default";
  959         status = "okay";
  960 };
  961 
  962 &mixer {
  963         status = "okay";
  964 };
  965 
  966 &mshc_0 {
  967         broken-cd;
  968         non-removable;
  969         card-detect-delay = <200>;
  970         vmmc-supply = <&ldo22_reg>;
  971         clock-frequency = <400000000>;
  972         samsung,dw-mshc-ciu-div = <0>;
  973         samsung,dw-mshc-sdr-timing = <2 3>;
  974         samsung,dw-mshc-ddr-timing = <1 2>;
  975         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
  976         pinctrl-names = "default";
  977         status = "okay";
  978         bus-width = <8>;
  979         cap-mmc-highspeed;
  980 };
  981 
  982 &pmu_system_controller {
  983         assigned-clocks = <&pmu_system_controller 0>;
  984         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
  985 };
  986 
  987 &pinctrl_0 {
  988         pinctrl-names = "default";
  989         pinctrl-0 = <&sleep0>;
  990 
  991         mhl_int: mhl-int-pins {
  992                 samsung,pins = "gpf3-5";
  993                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  994         };
  995 
  996         i2c_mhl_bus: i2c-mhl-bus-pins {
  997                 samsung,pins = "gpf0-4", "gpf0-6";
  998                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
  999                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 1000                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 1001         };
 1002 
 1003         sleep0: sleep-state {
 1004                 PIN_SLP(gpa0-0, INPUT, NONE);
 1005                 PIN_SLP(gpa0-1, OUT0, NONE);
 1006                 PIN_SLP(gpa0-2, INPUT, NONE);
 1007                 PIN_SLP(gpa0-3, INPUT, UP);
 1008                 PIN_SLP(gpa0-4, INPUT, NONE);
 1009                 PIN_SLP(gpa0-5, INPUT, DOWN);
 1010                 PIN_SLP(gpa0-6, INPUT, DOWN);
 1011                 PIN_SLP(gpa0-7, INPUT, UP);
 1012 
 1013                 PIN_SLP(gpa1-0, INPUT, DOWN);
 1014                 PIN_SLP(gpa1-1, INPUT, DOWN);
 1015                 PIN_SLP(gpa1-2, INPUT, DOWN);
 1016                 PIN_SLP(gpa1-3, INPUT, DOWN);
 1017                 PIN_SLP(gpa1-4, INPUT, DOWN);
 1018                 PIN_SLP(gpa1-5, INPUT, DOWN);
 1019 
 1020                 PIN_SLP(gpb-0, INPUT, NONE);
 1021                 PIN_SLP(gpb-1, INPUT, NONE);
 1022                 PIN_SLP(gpb-2, INPUT, NONE);
 1023                 PIN_SLP(gpb-3, INPUT, NONE);
 1024                 PIN_SLP(gpb-4, INPUT, DOWN);
 1025                 PIN_SLP(gpb-5, INPUT, UP);
 1026                 PIN_SLP(gpb-6, INPUT, DOWN);
 1027                 PIN_SLP(gpb-7, INPUT, DOWN);
 1028 
 1029                 PIN_SLP(gpc0-0, INPUT, DOWN);
 1030                 PIN_SLP(gpc0-1, INPUT, DOWN);
 1031                 PIN_SLP(gpc0-2, INPUT, DOWN);
 1032                 PIN_SLP(gpc0-3, INPUT, DOWN);
 1033                 PIN_SLP(gpc0-4, INPUT, DOWN);
 1034 
 1035                 PIN_SLP(gpc1-0, INPUT, NONE);
 1036                 PIN_SLP(gpc1-1, PREV, NONE);
 1037                 PIN_SLP(gpc1-2, INPUT, NONE);
 1038                 PIN_SLP(gpc1-3, INPUT, NONE);
 1039                 PIN_SLP(gpc1-4, INPUT, NONE);
 1040 
 1041                 PIN_SLP(gpd0-0, INPUT, DOWN);
 1042                 PIN_SLP(gpd0-1, INPUT, DOWN);
 1043                 PIN_SLP(gpd0-2, INPUT, NONE);
 1044                 PIN_SLP(gpd0-3, INPUT, NONE);
 1045 
 1046                 PIN_SLP(gpd1-0, INPUT, DOWN);
 1047                 PIN_SLP(gpd1-1, INPUT, DOWN);
 1048                 PIN_SLP(gpd1-2, INPUT, NONE);
 1049                 PIN_SLP(gpd1-3, INPUT, NONE);
 1050 
 1051                 PIN_SLP(gpf0-0, INPUT, NONE);
 1052                 PIN_SLP(gpf0-1, INPUT, NONE);
 1053                 PIN_SLP(gpf0-2, INPUT, DOWN);
 1054                 PIN_SLP(gpf0-3, INPUT, DOWN);
 1055                 PIN_SLP(gpf0-4, INPUT, NONE);
 1056                 PIN_SLP(gpf0-5, INPUT, DOWN);
 1057                 PIN_SLP(gpf0-6, INPUT, NONE);
 1058                 PIN_SLP(gpf0-7, INPUT, DOWN);
 1059 
 1060                 PIN_SLP(gpf1-0, INPUT, DOWN);
 1061                 PIN_SLP(gpf1-1, INPUT, DOWN);
 1062                 PIN_SLP(gpf1-2, INPUT, DOWN);
 1063                 PIN_SLP(gpf1-3, INPUT, DOWN);
 1064                 PIN_SLP(gpf1-4, INPUT, NONE);
 1065                 PIN_SLP(gpf1-5, INPUT, NONE);
 1066                 PIN_SLP(gpf1-6, INPUT, DOWN);
 1067                 PIN_SLP(gpf1-7, PREV, NONE);
 1068 
 1069                 PIN_SLP(gpf2-0, PREV, NONE);
 1070                 PIN_SLP(gpf2-1, INPUT, DOWN);
 1071                 PIN_SLP(gpf2-2, INPUT, DOWN);
 1072                 PIN_SLP(gpf2-3, INPUT, DOWN);
 1073                 PIN_SLP(gpf2-4, INPUT, DOWN);
 1074                 PIN_SLP(gpf2-5, INPUT, DOWN);
 1075                 PIN_SLP(gpf2-6, INPUT, NONE);
 1076                 PIN_SLP(gpf2-7, INPUT, NONE);
 1077 
 1078                 PIN_SLP(gpf3-0, INPUT, NONE);
 1079                 PIN_SLP(gpf3-1, PREV, NONE);
 1080                 PIN_SLP(gpf3-2, PREV, NONE);
 1081                 PIN_SLP(gpf3-3, PREV, NONE);
 1082                 PIN_SLP(gpf3-4, OUT1, NONE);
 1083                 PIN_SLP(gpf3-5, INPUT, DOWN);
 1084 
 1085                 PIN_SLP(gpj0-0, PREV, NONE);
 1086                 PIN_SLP(gpj0-1, PREV, NONE);
 1087                 PIN_SLP(gpj0-2, PREV, NONE);
 1088                 PIN_SLP(gpj0-3, INPUT, DOWN);
 1089                 PIN_SLP(gpj0-4, PREV, NONE);
 1090                 PIN_SLP(gpj0-5, PREV, NONE);
 1091                 PIN_SLP(gpj0-6, INPUT, DOWN);
 1092                 PIN_SLP(gpj0-7, INPUT, DOWN);
 1093 
 1094                 PIN_SLP(gpj1-0, INPUT, DOWN);
 1095                 PIN_SLP(gpj1-1, PREV, NONE);
 1096                 PIN_SLP(gpj1-2, PREV, NONE);
 1097                 PIN_SLP(gpj1-3, INPUT, DOWN);
 1098                 PIN_SLP(gpj1-4, INPUT, DOWN);
 1099         };
 1100 };
 1101 
 1102 &pinctrl_1 {
 1103         pinctrl-names = "default";
 1104         pinctrl-0 = <&sleep1>;
 1105 
 1106         gpio_keys: gpio-keys-pins {
 1107                 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
 1108                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 1109         };
 1110 
 1111         bt_shutdown: bt-shutdown-pins {
 1112                 samsung,pins = "gpl0-6";
 1113                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 1114         };
 1115 
 1116         bt_host_wakeup: bt-host-wakeup-pins {
 1117                 samsung,pins = "gpx2-6";
 1118                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 1119         };
 1120 
 1121         bt_device_wakeup: bt-device-wakeup-pins {
 1122                 samsung,pins = "gpx3-1";
 1123                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 1124         };
 1125 
 1126         max77686_irq: max77686-irq-pins {
 1127                 samsung,pins = "gpx0-7";
 1128                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 1129         };
 1130 
 1131         max77693_irq: max77693-irq-pins {
 1132                 samsung,pins = "gpx1-5";
 1133                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 1134         };
 1135 
 1136         max77693_fuel_irq: max77693-fuel-irq-pins {
 1137                 samsung,pins = "gpx2-3";
 1138                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 1139         };
 1140 
 1141         sdhci2_cd: sdhci2-cd-irq-pins {
 1142                 samsung,pins = "gpx3-4";
 1143                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 1144         };
 1145 
 1146         hdmi_hpd: hdmi-hpd-pins {
 1147                 samsung,pins = "gpx3-7";
 1148                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 1149         };
 1150 
 1151         sleep1: sleep-state {
 1152                 PIN_SLP(gpk0-0, PREV, NONE);
 1153                 PIN_SLP(gpk0-1, PREV, NONE);
 1154                 PIN_SLP(gpk0-2, OUT0, NONE);
 1155                 PIN_SLP(gpk0-3, PREV, NONE);
 1156                 PIN_SLP(gpk0-4, PREV, NONE);
 1157                 PIN_SLP(gpk0-5, PREV, NONE);
 1158                 PIN_SLP(gpk0-6, PREV, NONE);
 1159 
 1160                 PIN_SLP(gpk1-0, INPUT, DOWN);
 1161                 PIN_SLP(gpk1-1, INPUT, DOWN);
 1162                 PIN_SLP(gpk1-2, INPUT, DOWN);
 1163                 PIN_SLP(gpk1-3, PREV, NONE);
 1164                 PIN_SLP(gpk1-4, PREV, NONE);
 1165                 PIN_SLP(gpk1-5, PREV, NONE);
 1166                 PIN_SLP(gpk1-6, PREV, NONE);
 1167 
 1168                 PIN_SLP(gpk2-0, INPUT, DOWN);
 1169                 PIN_SLP(gpk2-1, INPUT, DOWN);
 1170                 PIN_SLP(gpk2-2, INPUT, DOWN);
 1171                 PIN_SLP(gpk2-3, INPUT, DOWN);
 1172                 PIN_SLP(gpk2-4, INPUT, DOWN);
 1173                 PIN_SLP(gpk2-5, INPUT, DOWN);
 1174                 PIN_SLP(gpk2-6, INPUT, DOWN);
 1175 
 1176                 PIN_SLP(gpk3-0, OUT0, NONE);
 1177                 PIN_SLP(gpk3-1, INPUT, NONE);
 1178                 PIN_SLP(gpk3-2, INPUT, DOWN);
 1179                 PIN_SLP(gpk3-3, INPUT, NONE);
 1180                 PIN_SLP(gpk3-4, INPUT, NONE);
 1181                 PIN_SLP(gpk3-5, INPUT, NONE);
 1182                 PIN_SLP(gpk3-6, INPUT, NONE);
 1183 
 1184                 PIN_SLP(gpl0-0, INPUT, DOWN);
 1185                 PIN_SLP(gpl0-1, INPUT, DOWN);
 1186                 PIN_SLP(gpl0-2, INPUT, DOWN);
 1187                 PIN_SLP(gpl0-3, INPUT, DOWN);
 1188                 PIN_SLP(gpl0-4, PREV, NONE);
 1189                 PIN_SLP(gpl0-6, PREV, NONE);
 1190 
 1191                 PIN_SLP(gpl1-0, INPUT, DOWN);
 1192                 PIN_SLP(gpl1-1, INPUT, DOWN);
 1193                 PIN_SLP(gpl2-0, INPUT, DOWN);
 1194                 PIN_SLP(gpl2-1, INPUT, DOWN);
 1195                 PIN_SLP(gpl2-2, INPUT, DOWN);
 1196                 PIN_SLP(gpl2-3, INPUT, DOWN);
 1197                 PIN_SLP(gpl2-4, INPUT, DOWN);
 1198                 PIN_SLP(gpl2-5, INPUT, DOWN);
 1199                 PIN_SLP(gpl2-6, PREV, NONE);
 1200                 PIN_SLP(gpl2-7, INPUT, DOWN);
 1201 
 1202                 PIN_SLP(gpm0-0, INPUT, DOWN);
 1203                 PIN_SLP(gpm0-1, INPUT, DOWN);
 1204                 PIN_SLP(gpm0-2, INPUT, DOWN);
 1205                 PIN_SLP(gpm0-3, INPUT, DOWN);
 1206                 PIN_SLP(gpm0-4, INPUT, DOWN);
 1207                 PIN_SLP(gpm0-5, INPUT, DOWN);
 1208                 PIN_SLP(gpm0-6, INPUT, DOWN);
 1209                 PIN_SLP(gpm0-7, INPUT, DOWN);
 1210 
 1211                 PIN_SLP(gpm1-0, INPUT, DOWN);
 1212                 PIN_SLP(gpm1-1, INPUT, DOWN);
 1213                 PIN_SLP(gpm1-2, INPUT, NONE);
 1214                 PIN_SLP(gpm1-3, INPUT, NONE);
 1215                 PIN_SLP(gpm1-4, INPUT, NONE);
 1216                 PIN_SLP(gpm1-5, INPUT, NONE);
 1217                 PIN_SLP(gpm1-6, INPUT, DOWN);
 1218 
 1219                 PIN_SLP(gpm2-0, INPUT, NONE);
 1220                 PIN_SLP(gpm2-1, INPUT, NONE);
 1221                 PIN_SLP(gpm2-2, INPUT, DOWN);
 1222                 PIN_SLP(gpm2-3, INPUT, DOWN);
 1223                 PIN_SLP(gpm2-4, INPUT, DOWN);
 1224 
 1225                 PIN_SLP(gpm3-0, PREV, NONE);
 1226                 PIN_SLP(gpm3-1, PREV, NONE);
 1227                 PIN_SLP(gpm3-2, PREV, NONE);
 1228                 PIN_SLP(gpm3-3, OUT1, NONE);
 1229                 PIN_SLP(gpm3-4, INPUT, DOWN);
 1230                 PIN_SLP(gpm3-5, INPUT, DOWN);
 1231                 PIN_SLP(gpm3-6, INPUT, DOWN);
 1232                 PIN_SLP(gpm3-7, INPUT, DOWN);
 1233 
 1234                 PIN_SLP(gpm4-0, INPUT, DOWN);
 1235                 PIN_SLP(gpm4-1, INPUT, DOWN);
 1236                 PIN_SLP(gpm4-2, INPUT, DOWN);
 1237                 PIN_SLP(gpm4-3, INPUT, DOWN);
 1238                 PIN_SLP(gpm4-4, INPUT, DOWN);
 1239                 PIN_SLP(gpm4-5, INPUT, DOWN);
 1240                 PIN_SLP(gpm4-6, INPUT, DOWN);
 1241                 PIN_SLP(gpm4-7, INPUT, DOWN);
 1242 
 1243                 PIN_SLP(gpy0-0, INPUT, DOWN);
 1244                 PIN_SLP(gpy0-1, INPUT, DOWN);
 1245                 PIN_SLP(gpy0-2, INPUT, DOWN);
 1246                 PIN_SLP(gpy0-3, INPUT, DOWN);
 1247                 PIN_SLP(gpy0-4, INPUT, DOWN);
 1248                 PIN_SLP(gpy0-5, INPUT, DOWN);
 1249 
 1250                 PIN_SLP(gpy1-0, INPUT, DOWN);
 1251                 PIN_SLP(gpy1-1, INPUT, DOWN);
 1252                 PIN_SLP(gpy1-2, INPUT, DOWN);
 1253                 PIN_SLP(gpy1-3, INPUT, DOWN);
 1254 
 1255                 PIN_SLP(gpy2-0, PREV, NONE);
 1256                 PIN_SLP(gpy2-1, INPUT, DOWN);
 1257                 PIN_SLP(gpy2-2, INPUT, NONE);
 1258                 PIN_SLP(gpy2-3, INPUT, NONE);
 1259                 PIN_SLP(gpy2-4, INPUT, NONE);
 1260                 PIN_SLP(gpy2-5, INPUT, NONE);
 1261 
 1262                 PIN_SLP(gpy3-0, INPUT, DOWN);
 1263                 PIN_SLP(gpy3-1, INPUT, DOWN);
 1264                 PIN_SLP(gpy3-2, INPUT, DOWN);
 1265                 PIN_SLP(gpy3-3, INPUT, DOWN);
 1266                 PIN_SLP(gpy3-4, INPUT, DOWN);
 1267                 PIN_SLP(gpy3-5, INPUT, DOWN);
 1268                 PIN_SLP(gpy3-6, INPUT, DOWN);
 1269                 PIN_SLP(gpy3-7, INPUT, DOWN);
 1270 
 1271                 PIN_SLP(gpy4-0, INPUT, DOWN);
 1272                 PIN_SLP(gpy4-1, INPUT, DOWN);
 1273                 PIN_SLP(gpy4-2, INPUT, DOWN);
 1274                 PIN_SLP(gpy4-3, INPUT, DOWN);
 1275                 PIN_SLP(gpy4-4, INPUT, DOWN);
 1276                 PIN_SLP(gpy4-5, INPUT, DOWN);
 1277                 PIN_SLP(gpy4-6, INPUT, DOWN);
 1278                 PIN_SLP(gpy4-7, INPUT, DOWN);
 1279 
 1280                 PIN_SLP(gpy5-0, INPUT, DOWN);
 1281                 PIN_SLP(gpy5-1, INPUT, DOWN);
 1282                 PIN_SLP(gpy5-2, INPUT, DOWN);
 1283                 PIN_SLP(gpy5-3, INPUT, DOWN);
 1284                 PIN_SLP(gpy5-4, INPUT, DOWN);
 1285                 PIN_SLP(gpy5-5, INPUT, DOWN);
 1286                 PIN_SLP(gpy5-6, INPUT, DOWN);
 1287                 PIN_SLP(gpy5-7, INPUT, DOWN);
 1288 
 1289                 PIN_SLP(gpy6-0, INPUT, DOWN);
 1290                 PIN_SLP(gpy6-1, INPUT, DOWN);
 1291                 PIN_SLP(gpy6-2, INPUT, DOWN);
 1292                 PIN_SLP(gpy6-3, INPUT, DOWN);
 1293                 PIN_SLP(gpy6-4, INPUT, DOWN);
 1294                 PIN_SLP(gpy6-5, INPUT, DOWN);
 1295                 PIN_SLP(gpy6-6, INPUT, DOWN);
 1296                 PIN_SLP(gpy6-7, INPUT, DOWN);
 1297         };
 1298 };
 1299 
 1300 &pinctrl_2 {
 1301         pinctrl-names = "default";
 1302         pinctrl-0 = <&sleep2>;
 1303 
 1304         sleep2: sleep-state {
 1305                 PIN_SLP(gpz-0, INPUT, DOWN);
 1306                 PIN_SLP(gpz-1, INPUT, DOWN);
 1307                 PIN_SLP(gpz-2, INPUT, DOWN);
 1308                 PIN_SLP(gpz-3, INPUT, DOWN);
 1309                 PIN_SLP(gpz-4, INPUT, DOWN);
 1310                 PIN_SLP(gpz-5, INPUT, DOWN);
 1311                 PIN_SLP(gpz-6, INPUT, DOWN);
 1312         };
 1313 };
 1314 
 1315 &pinctrl_3 {
 1316         pinctrl-names = "default";
 1317         pinctrl-0 = <&sleep3>;
 1318 
 1319         sleep3: sleep-state {
 1320                 PIN_SLP(gpv0-0, INPUT, DOWN);
 1321                 PIN_SLP(gpv0-1, INPUT, DOWN);
 1322                 PIN_SLP(gpv0-2, INPUT, DOWN);
 1323                 PIN_SLP(gpv0-3, INPUT, DOWN);
 1324                 PIN_SLP(gpv0-4, INPUT, DOWN);
 1325                 PIN_SLP(gpv0-5, INPUT, DOWN);
 1326                 PIN_SLP(gpv0-6, INPUT, DOWN);
 1327                 PIN_SLP(gpv0-7, INPUT, DOWN);
 1328 
 1329                 PIN_SLP(gpv1-0, INPUT, DOWN);
 1330                 PIN_SLP(gpv1-1, INPUT, DOWN);
 1331                 PIN_SLP(gpv1-2, INPUT, DOWN);
 1332                 PIN_SLP(gpv1-3, INPUT, DOWN);
 1333                 PIN_SLP(gpv1-4, INPUT, DOWN);
 1334                 PIN_SLP(gpv1-5, INPUT, DOWN);
 1335                 PIN_SLP(gpv1-6, INPUT, DOWN);
 1336                 PIN_SLP(gpv1-7, INPUT, DOWN);
 1337 
 1338                 PIN_SLP(gpv2-0, INPUT, DOWN);
 1339                 PIN_SLP(gpv2-1, INPUT, DOWN);
 1340                 PIN_SLP(gpv2-2, INPUT, DOWN);
 1341                 PIN_SLP(gpv2-3, INPUT, DOWN);
 1342                 PIN_SLP(gpv2-4, INPUT, DOWN);
 1343                 PIN_SLP(gpv2-5, INPUT, DOWN);
 1344                 PIN_SLP(gpv2-6, INPUT, DOWN);
 1345                 PIN_SLP(gpv2-7, INPUT, DOWN);
 1346 
 1347                 PIN_SLP(gpv3-0, INPUT, DOWN);
 1348                 PIN_SLP(gpv3-1, INPUT, DOWN);
 1349                 PIN_SLP(gpv3-2, INPUT, DOWN);
 1350                 PIN_SLP(gpv3-3, INPUT, DOWN);
 1351                 PIN_SLP(gpv3-4, INPUT, DOWN);
 1352                 PIN_SLP(gpv3-5, INPUT, DOWN);
 1353                 PIN_SLP(gpv3-6, INPUT, DOWN);
 1354                 PIN_SLP(gpv3-7, INPUT, DOWN);
 1355 
 1356                 PIN_SLP(gpv4-0, INPUT, DOWN);
 1357         };
 1358 };
 1359 
 1360 &pwm {
 1361         pinctrl-0 = <&pwm0_out>;
 1362         pinctrl-names = "default";
 1363         samsung,pwm-outputs = <0>;
 1364         status = "okay";
 1365 };
 1366 
 1367 &rtc {
 1368         status = "okay";
 1369         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
 1370         clock-names = "rtc", "rtc_src";
 1371 };
 1372 
 1373 &sdhci_2 {
 1374         bus-width = <4>;
 1375         cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
 1376         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
 1377         pinctrl-names = "default";
 1378         vmmc-supply = <&ldo21_reg>;
 1379         status = "okay";
 1380 };
 1381 
 1382 &sdhci_3 {
 1383         #address-cells = <1>;
 1384         #size-cells = <0>;
 1385         non-removable;
 1386         bus-width = <4>;
 1387 
 1388         mmc-pwrseq = <&wlan_pwrseq>;
 1389         pinctrl-names = "default";
 1390         pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
 1391         status = "okay";
 1392 
 1393         brcmf: wifi@1 {
 1394                 reg = <1>;
 1395                 compatible = "brcm,bcm4329-fmac";
 1396                 interrupt-parent = <&gpx2>;
 1397                 interrupts = <5 IRQ_TYPE_NONE>;
 1398                 interrupt-names = "host-wake";
 1399         };
 1400 };
 1401 
 1402 &serial_0 {
 1403         pinctrl-0 = <&uart0_data &uart0_fctl>;
 1404         pinctrl-names = "default";
 1405         status = "okay";
 1406 
 1407         bluetooth {
 1408                 compatible = "brcm,bcm4330-bt";
 1409                 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
 1410                 pinctrl-names = "default";
 1411                 max-speed = <3000000>;
 1412                 shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
 1413                 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
 1414                 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 1415                 clocks = <&max77686 MAX77686_CLK_PMIC>;
 1416         };
 1417 };
 1418 
 1419 &serial_1 {
 1420         status = "okay";
 1421 };
 1422 
 1423 &serial_2 {
 1424         status = "okay";
 1425 };
 1426 
 1427 &serial_3 {
 1428         status = "okay";
 1429 };
 1430 
 1431 &spi_1 {
 1432         pinctrl-names = "default";
 1433         pinctrl-0 = <&spi1_bus>;
 1434         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
 1435         status = "okay";
 1436 
 1437         s5c73m3_spi: image-sensor@0 {
 1438                 compatible = "samsung,s5c73m3";
 1439                 spi-max-frequency = <50000000>;
 1440                 reg = <0>;
 1441                 controller-data {
 1442                         samsung,spi-feedback-delay = <2>;
 1443                 };
 1444         };
 1445 };
 1446 
 1447 &tmu {
 1448         vtmu-supply = <&ldo10_reg>;
 1449         status = "okay";
 1450 };
Cache object: f39130d216a9f6631208703ea8a3d77e
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/exynos4412-midas.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/exynos4412-midas.dtsi
