exynos4412-p4note.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Samsung's Exynos4412 based p4note device family base DT.
    4  * Based on exynos4412-midas.dtsi.
    5  *
    6  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
    7  *              http://www.samsung.com
    8  */
    9 
   10 /dts-v1/;
   11 #include "exynos4412.dtsi"
   12 #include "exynos4412-ppmu-common.dtsi"
   13 
   14 #include <dt-bindings/clock/maxim,max77686.h>
   15 #include <dt-bindings/gpio/gpio.h>
   16 #include <dt-bindings/input/linux-event-codes.h>
   17 #include <dt-bindings/interrupt-controller/irq.h>
   18 #include <dt-bindings/power/summit,smb347-charger.h>
   19 #include "exynos-pinctrl.h"
   20 
   21 / {
   22         compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
   23 
   24         memory@40000000 {
   25                 device_type = "memory";
   26                 reg = <0x40000000 0x80000000>;
   27         };
   28 
   29         chosen {
   30                 stdout-path = &serial_2;
   31         };
   32 
   33         firmware@204f000 {
   34                 compatible = "samsung,secure-firmware";
   35                 reg = <0x0204F000 0x1000>;
   36         };
   37 
   38         fixed-rate-clocks {
   39                 xxti {
   40                         compatible = "samsung,clock-xxti";
   41                         clock-frequency = <0>;
   42                 };
   43 
   44                 xusbxti {
   45                         compatible = "samsung,clock-xusbxti";
   46                         clock-frequency = <24000000>;
   47                 };
   48         };
   49 
   50         gpio-keys {
   51                 compatible = "gpio-keys";
   52                 pinctrl-names = "default";
   53                 pinctrl-0 = <&gpio_keys>;
   54 
   55                 key-down {
   56                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
   57                         linux,code = <KEY_VOLUMEDOWN>;
   58                         label = "volume down";
   59                         debounce-interval = <10>;
   60                 };
   61 
   62                 key-up {
   63                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
   64                         linux,code = <KEY_VOLUMEUP>;
   65                         label = "volume up";
   66                         debounce-interval = <10>;
   67                 };
   68 
   69                 key-power {
   70                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
   71                         linux,code = <KEY_POWER>;
   72                         label = "power";
   73                         debounce-interval = <10>;
   74                         wakeup-source;
   75                 };
   76         };
   77 
   78         voltage-regulator-1 {
   79                 compatible = "regulator-fixed";
   80                 regulator-name = "TSP_LDO1";
   81                 pinctrl-names = "default";
   82                 pinctrl-0 = <&tsp_reg_gpio_1>;
   83                 gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
   84                 enable-active-high;
   85                 regulator-always-on;
   86         };
   87 
   88         voltage-regulator-2 {
   89                 compatible = "regulator-fixed";
   90                 regulator-name = "TSP_LDO2";
   91                 pinctrl-names = "default";
   92                 pinctrl-0 = <&tsp_reg_gpio_2>;
   93                 gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
   94                 enable-active-high;
   95                 regulator-always-on;
   96         };
   97 
   98         voltage-regulator-3 {
   99                 compatible = "regulator-fixed";
  100                 regulator-name = "TSP_LDO3";
  101                 pinctrl-names = "default";
  102                 pinctrl-0 = <&tsp_reg_gpio_3>;
  103                 gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
  104                 startup-delay-us = <20000>;
  105                 enable-active-high;
  106                 regulator-always-on;
  107         };
  108 
  109         panel_vdd: voltage-regulator-4 {
  110                 compatible = "regulator-fixed";
  111                 regulator-name = "LCD_ENABLE";
  112                 pinctrl-names = "default";
  113                 pinctrl-0 = <&lcd_enable>;
  114                 gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
  115                 enable-active-high;
  116                 regulator-boot-on;
  117         };
  118 
  119         wlan_pwrseq: sdhci3-pwrseq {
  120                 compatible = "mmc-pwrseq-simple";
  121                 reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
  122                 pinctrl-0 = <&wifi_reset>;
  123                 pinctrl-names = "default";
  124                 clocks = <&max77686 MAX77686_CLK_PMIC>;
  125                 clock-names = "ext_clock";
  126         };
  127 
  128         battery_cell: battery-cell {
  129                 compatible = "simple-battery";
  130                 device-chemistry = "lithium-ion";
  131                 constant-charge-current-max-microamp = <2200000>;
  132                 precharge-current-microamp = <250000>;
  133                 charge-term-current-microamp = <250000>;
  134                 constant-charge-voltage-max-microvolt = <4200000>;
  135 
  136                 power-supplies = <&power_supply>;
  137         };
  138 
  139         i2c-gpio-1 {
  140                 compatible = "i2c-gpio";
  141                 sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  142                 scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  143                 i2c-gpio,delay-us = <2>;
  144                 #address-cells = <1>;
  145                 #size-cells = <0>;
  146 
  147                 magnetometer@c {
  148                         compatible = "asahi-kasei,ak8975";
  149                         reg = <0x0c>;
  150                         pinctrl-0 = <&ak8975_irq>;
  151                         pinctrl-names = "default";
  152                         interrupt-parent = <&gpm4>;
  153                         interrupts = <7 IRQ_TYPE_EDGE_RISING>;
  154                 };
  155         };
  156 
  157         i2c-gpio-2 {
  158                 compatible = "i2c-gpio";
  159                 sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  160                 scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  161                 i2c-gpio,delay-us = <2>;
  162                 #address-cells = <1>;
  163                 #size-cells = <0>;
  164 
  165                 fuel-gauge@36 {
  166                         compatible = "maxim,max17042";
  167                         reg = <0x36>;
  168                         pinctrl-0 = <&fuel_alert_irq>;
  169                         pinctrl-names = "default";
  170                         interrupt-parent = <&gpx2>;
  171                         interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
  172                         maxim,rsns-microohm = <10000>;
  173                         maxim,over-heat-temp = <600>;
  174                         maxim,over-volt = <4300>;
  175                 };
  176         };
  177 
  178         i2c-gpio-3 {
  179                 compatible = "i2c-gpio";
  180                 sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  181                 scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  182                 i2c-gpio,delay-us = <5>;
  183                 #address-cells = <1>;
  184                 #size-cells = <0>;
  185 
  186                 adc@41 {
  187                         compatible = "st,stmpe811";
  188                         reg = <0x41>;
  189                         pinctrl-0 = <&stmpe_adc_irq>;
  190                         pinctrl-names = "default";
  191                         interrupt-parent = <&gpx0>;
  192                         interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
  193                         interrupt-controller;
  194                         irq-trigger = <0x1>;
  195                         st,adc-freq = <3>;
  196                         st,mod-12b = <1>;
  197                         st,ref-sel = <0>;
  198                         st,sample-time = <3>;
  199 
  200                         stmpe_adc {
  201                                 compatible = "st,stmpe-adc";
  202                                 #io-channel-cells = <1>;
  203                                 st,norequest-mask = <0x2F>;
  204                         };
  205                 };
  206         };
  207 
  208         i2c-gpio-4 {
  209                 compatible = "i2c-gpio";
  210                 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  211                 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  212 
  213                 i2c-gpio,delay-us = <2>;
  214                 #address-cells = <1>;
  215                 #size-cells = <0>;
  216 
  217                 power_supply: charger@6 {
  218                         compatible = "summit,smb347";
  219                         reg = <0x6>;
  220                         summit,enable-usb-charging;
  221                         summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
  222                         summit,fast-voltage-threshold-microvolt = <2600000>;
  223                         summit,chip-temperature-threshold-celsius = <130>;
  224                         summit,usb-current-limit-microamp = <1800000>;
  225 
  226                         monitored-battery = <&battery_cell>;
  227                 };
  228         };
  229 
  230         panel {
  231                 compatible = "samsung,ltl101al01";
  232                 pinctrl-0 = <&lvds_nshdn>;
  233                 pinctrl-names = "default";
  234                 power-supply = <&panel_vdd>;
  235                 enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
  236                 backlight = <&backlight>;
  237 
  238                 port {
  239                         lcd_ep: endpoint {
  240                                 remote-endpoint = <&fimd_ep>;
  241                         };
  242                 };
  243         };
  244 
  245         backlight: backlight {
  246                 compatible = "pwm-backlight";
  247                 pinctrl-0 = <&led_bl_reset>;
  248                 pinctrl-names = "default";
  249                 enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
  250                 pwms = <&pwm 1 78770 0>;
  251                 brightness-levels = <0 48 128 255>;
  252                 num-interpolated-steps = <8>;
  253                 default-brightness-level = <12>;
  254         };
  255 };
  256 
  257 &adc {
  258         vdd-supply = <&ldo3_reg>;
  259         /* not verified */
  260         status = "okay";
  261 };
  262 
  263 &bus_dmc {
  264         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
  265         vdd-supply = <&buck1_reg>;
  266         status = "okay";
  267 };
  268 
  269 &bus_acp {
  270         devfreq = <&bus_dmc>;
  271         status = "okay";
  272 };
  273 
  274 &bus_c2c {
  275         devfreq = <&bus_dmc>;
  276         status = "okay";
  277 };
  278 
  279 &bus_leftbus {
  280         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
  281         vdd-supply = <&buck3_reg>;
  282         status = "okay";
  283 };
  284 
  285 &bus_rightbus {
  286         devfreq = <&bus_leftbus>;
  287         status = "okay";
  288 };
  289 
  290 &bus_display {
  291         devfreq = <&bus_leftbus>;
  292         status = "okay";
  293 };
  294 
  295 &bus_fsys {
  296         devfreq = <&bus_leftbus>;
  297         status = "okay";
  298 };
  299 
  300 &bus_peri {
  301         devfreq = <&bus_leftbus>;
  302         status = "okay";
  303 };
  304 
  305 &bus_mfc {
  306         devfreq = <&bus_leftbus>;
  307         status = "okay";
  308 };
  309 
  310 &cpu0 {
  311         cpu0-supply = <&buck2_reg>;
  312 };
  313 
  314 &cpu_thermal {
  315         cooling-maps {
  316                 map0 {
  317                         /* Corresponds to 800MHz at freq_table */
  318                         cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
  319                                          <&cpu2 7 7>, <&cpu3 7 7>;
  320                 };
  321                 map1 {
  322                         /* Corresponds to 200MHz at freq_table */
  323                         cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
  324                                          <&cpu2 13 13>, <&cpu3 13 13>;
  325                 };
  326         };
  327 };
  328 
  329 &exynos_usbphy {
  330         status = "okay";
  331 };
  332 
  333 &fimd {
  334         pinctrl-0 = <&lcd_clk &lcd_data24>;
  335         pinctrl-names = "default";
  336         #address-cells = <1>;
  337         #size-cells = <0>;
  338         status = "okay";
  339 
  340         samsung,invert-vclk;
  341 
  342         port@3 {
  343                 reg = <3>;
  344 
  345                 fimd_ep: endpoint {
  346                         remote-endpoint = <&lcd_ep>;
  347                 };
  348         };
  349 };
  350 
  351 &gpu {
  352         mali-supply = <&buck4_reg>;
  353         status = "okay";
  354 };
  355 
  356 &hsotg {
  357         vusb_a-supply = <&ldo12_reg>;
  358         dr_mode = "peripheral";
  359         status = "okay";
  360 };
  361 
  362 &i2c_3 {
  363         samsung,i2c-sda-delay = <100>;
  364         samsung,i2c-slave-addr = <0x10>;
  365         samsung,i2c-max-bus-freq = <400000>;
  366         pinctrl-0 = <&i2c3_bus>;
  367         pinctrl-names = "default";
  368         status = "okay";
  369 
  370         touchscreen@4a {
  371                 compatible = "atmel,maxtouch";
  372                 reg = <0x4a>;
  373                 pinctrl-0 = <&tsp_rst &tsp_irq>;
  374                 pinctrl-names = "default";
  375                 interrupt-parent = <&gpm2>;
  376                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
  377                 reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>;
  378         };
  379 };
  380 
  381 &i2c_7 {
  382         samsung,i2c-sda-delay = <100>;
  383         samsung,i2c-slave-addr = <0x10>;
  384         samsung,i2c-max-bus-freq = <400000>;
  385         pinctrl-0 = <&i2c7_bus>;
  386         pinctrl-names = "default";
  387         status = "okay";
  388 
  389         max77686: pmic@9 {
  390                 compatible = "maxim,max77686";
  391                 interrupt-parent = <&gpx0>;
  392                 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
  393                 pinctrl-0 = <&max77686_irq>;
  394                 pinctrl-names = "default";
  395                 wakeup-source;
  396                 reg = <0x09>;
  397                 #clock-cells = <1>;
  398 
  399                 voltage-regulators {
  400                         ldo1_reg: LDO1 {
  401                                 regulator-name = "ldo1";
  402                                 regulator-always-on;
  403                         };
  404 
  405                         ldo2_reg: LDO2 {
  406                                 regulator-name = "ldo2";
  407                                 regulator-always-on;
  408                         };
  409 
  410                         /* WM8994 audio */
  411                         ldo3_reg: LDO3 {
  412                                 regulator-name = "VCC_1.8V_AP";
  413                                 regulator-min-microvolt = <1800000>;
  414                                 regulator-max-microvolt = <1800000>;
  415                                 regulator-always-on;
  416                                 regulator-boot-on;
  417 
  418                                 regulator-state-mem {
  419                                         regulator-on-in-suspend;
  420                                 };
  421                         };
  422 
  423                         ldo4_reg: LDO4 {
  424                                 regulator-name = "ldo4";
  425                                 regulator-always-on;
  426                         };
  427 
  428                         ldo5_reg: LDO5 {
  429                                 regulator-name = "VCC_1.8V_IO";
  430                                 regulator-min-microvolt = <1800000>;
  431                                 regulator-max-microvolt = <1800000>;
  432 
  433                                 regulator-state-mem {
  434                                         regulator-off-in-suspend;
  435                                 };
  436                         };
  437 
  438                         ldo6_reg: LDO6 {
  439                                 regulator-name = "ldo6";
  440                                 regulator-always-on;
  441                         };
  442 
  443                         ldo7_reg: LDO7 {
  444                                 regulator-name = "ldo7";
  445                                 regulator-always-on;
  446                         };
  447 
  448                         /* CSI IP block */
  449                         ldo8_reg: LDO8 {
  450                                 regulator-name = "VMIPI_1.0V";
  451                                 regulator-min-microvolt = <1000000>;
  452                                 regulator-max-microvolt = <1000000>;
  453                                 regulator-always-on;
  454                                 regulator-boot-on;
  455 
  456                                 regulator-state-mem {
  457                                         regulator-on-in-suspend;
  458                                 };
  459                         };
  460 
  461                         /* IR LED on/off */
  462                         ldo9_reg: LDO9 {
  463                                 regulator-name = "VLED_IC_1.9V";
  464                                 regulator-min-microvolt = <1950000>;
  465                                 regulator-max-microvolt = <1950000>;
  466 
  467                                 regulator-state-mem {
  468                                         regulator-off-in-suspend;
  469                                 };
  470                         };
  471 
  472                         /* CSI IP block */
  473                         ldo10_reg: LDO10 {
  474                                 regulator-name = "VMIPI_1.8V";
  475                                 regulator-min-microvolt = <1800000>;
  476                                 regulator-max-microvolt = <1800000>;
  477                                 regulator-always-on;
  478                                 regulator-boot-on;
  479 
  480                                 regulator-state-mem {
  481                                         regulator-on-in-suspend;
  482                                 };
  483                         };
  484 
  485                         ldo11_reg: LDO11 {
  486                                 regulator-name = "VABB1_1.9V";
  487                                 regulator-min-microvolt = <1950000>;
  488                                 regulator-max-microvolt = <1950000>;
  489                                 regulator-always-on;
  490                                 regulator-boot-on;
  491 
  492                                 regulator-state-mem {
  493                                         regulator-off-in-suspend;
  494                                 };
  495                         };
  496 
  497                         /* USB OTG */
  498                         ldo12_reg: LDO12 {
  499                                 regulator-name = "VUOTG_3.0V";
  500                                 regulator-min-microvolt = <3000000>;
  501                                 regulator-max-microvolt = <3000000>;
  502                                 regulator-always-on;
  503                                 regulator-boot-on;
  504 
  505                                 regulator-state-mem {
  506                                         regulator-on-in-suspend;
  507                                 };
  508                         };
  509 
  510                         /* not connected */
  511                         ldo13_reg: LDO13 {
  512                                 regulator-name = "ldo13";
  513                         };
  514 
  515                         ldo14_reg: LDO14 {
  516                                 regulator-name = "VABB2_1.9V";
  517                                 regulator-min-microvolt = <1950000>;
  518                                 regulator-max-microvolt = <1950000>;
  519                                 regulator-always-on;
  520                                 regulator-boot-on;
  521 
  522                                 regulator-state-mem {
  523                                         regulator-off-in-suspend;
  524                                 };
  525                         };
  526 
  527                         ldo15_reg: LDO15 {
  528                                 regulator-name = "ldo15";
  529                                 regulator-always-on;
  530                         };
  531 
  532                         ldo16_reg: LDO16 {
  533                                 regulator-name = "ldo16";
  534                                 regulator-always-on;
  535                         };
  536 
  537                         /* not connected */
  538                         ldo17_reg: LDO17 {
  539                                 regulator-name = "ldo17";
  540                         };
  541 
  542                         /* Camera ISX012 */
  543                         ldo18_reg: LDO18 {
  544                                 regulator-name = "CAM_IO_1.8V";
  545                                 regulator-min-microvolt = <1800000>;
  546                                 regulator-max-microvolt = <1800000>;
  547 
  548                                 regulator-state-mem {
  549                                         regulator-off-in-suspend;
  550                                 };
  551                         };
  552 
  553                         /* Camera S5K6A3 */
  554                         ldo19_reg: LDO19 {
  555                                 regulator-name = "VT_CORE_1.8V";
  556                                 regulator-min-microvolt = <1800000>;
  557                                 regulator-max-microvolt = <1800000>;
  558 
  559                                 regulator-state-mem {
  560                                         regulator-off-in-suspend;
  561                                 };
  562                         };
  563 
  564                         /* not connected */
  565                         ldo20_reg: LDO20 {
  566                                 regulator-name = "ldo20";
  567                         };
  568 
  569                         /* MMC2 */
  570                         ldo21_reg: LDO21 {
  571                                 regulator-name = "VTF_2.8V";
  572                                 regulator-min-microvolt = <2800000>;
  573                                 regulator-max-microvolt = <2800000>;
  574                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
  575                         };
  576 
  577                         /* not connected */
  578                         ldo22_reg: LDO22 {
  579                                 regulator-name = "ldo22";
  580                         };
  581 
  582                         /* ADC */
  583                         ldo23_reg: LDO23 {
  584                                 regulator-name = "VDD_ADC_3.3V";
  585                                 regulator-min-microvolt = <3300000>;
  586                                 regulator-max-microvolt = <3300000>;
  587                                 regulator-always-on;
  588                                 regulator-boot-on;
  589 
  590                                 regulator-state-mem {
  591                                         regulator-off-in-suspend;
  592                                 };
  593                         };
  594 
  595                         /* Camera S5K6A3 */
  596                         ldo24_reg: LDO24 {
  597                                 regulator-name = "CAM_A2.8V";
  598                                 regulator-min-microvolt = <2800000>;
  599                                 regulator-max-microvolt = <2800000>;
  600 
  601                                 regulator-state-mem {
  602                                         regulator-off-in-suspend;
  603                                 };
  604                         };
  605 
  606                         ldo25_reg: LDO25 {
  607                                 regulator-name = "VLED_3.3V";
  608                                 regulator-min-microvolt = <3300000>;
  609                                 regulator-max-microvolt = <3300000>;
  610 
  611                                 regulator-state-mem {
  612                                         regulator-off-in-suspend;
  613                                 };
  614                         };
  615 
  616                         /* Camera ISX012 */
  617                         ldo26_reg: LDO26 {
  618                                 regulator-name = "3MP_AF_2.8V";
  619                                 regulator-min-microvolt = <2800000>;
  620                                 regulator-max-microvolt = <2800000>;
  621 
  622                                 regulator-state-mem {
  623                                         regulator-off-in-suspend;
  624                                 };
  625                         };
  626 
  627                         buck1_reg: BUCK1 {
  628                                 regulator-name = "VDD_MIF";
  629                                 regulator-min-microvolt = <850000>;
  630                                 regulator-max-microvolt = <1050000>;
  631                                 regulator-always-on;
  632                                 regulator-boot-on;
  633                         };
  634 
  635                         buck2_reg: BUCK2 {
  636                                 regulator-name = "VDD_ARM";
  637                                 regulator-min-microvolt = <850000>;
  638                                 regulator-max-microvolt = <1500000>;
  639                                 regulator-always-on;
  640                                 regulator-boot-on;
  641                         };
  642 
  643                         buck3_reg: BUCK3 {
  644                                 regulator-name = "VDD_INT";
  645                                 regulator-min-microvolt = <850000>;
  646                                 regulator-max-microvolt = <1100000>;
  647                                 regulator-always-on;
  648                                 regulator-boot-on;
  649                         };
  650 
  651                         buck4_reg: BUCK4 {
  652                                 regulator-name = "VDD_G3D";
  653                                 regulator-min-microvolt = <850000>;
  654                                 regulator-max-microvolt = <1075000>;
  655                                 regulator-boot-on;
  656                         };
  657 
  658                         buck5_reg: BUCK5 {
  659                                 regulator-name = "buck5";
  660                                 regulator-always-on;
  661                         };
  662 
  663                         buck6_reg: BUCK6 {
  664                                 regulator-name = "buck6";
  665                                 regulator-always-on;
  666                         };
  667 
  668                         buck7_reg: BUCK7 {
  669                                 regulator-name = "buck7";
  670                                 regulator-always-on;
  671                         };
  672 
  673                         /* not connected */
  674                         buck8_reg: BUCK8 {
  675                                 regulator-name = "buck8";
  676                         };
  677 
  678                         buck9_reg: BUCK9 {
  679                                 regulator-name = "3MP_CORE_1.2V";
  680                                 regulator-min-microvolt = <1200000>;
  681                                 regulator-max-microvolt = <1200000>;
  682 
  683                                 regulator-state-mem {
  684                                         regulator-off-in-suspend;
  685                                 };
  686                         };
  687                 };
  688         };
  689 };
  690 
  691 &mshc_0 {
  692         broken-cd;
  693         non-removable;
  694         card-detect-delay = <200>;
  695         clock-frequency = <400000000>;
  696         samsung,dw-mshc-ciu-div = <0>;
  697         samsung,dw-mshc-sdr-timing = <2 3>;
  698         samsung,dw-mshc-ddr-timing = <1 2>;
  699         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
  700         pinctrl-names = "default";
  701         bus-width = <4>;
  702         cap-mmc-highspeed;
  703         cap-sd-highspeed;
  704         status = "okay";
  705 };
  706 
  707 &pinctrl_0 {
  708         pinctrl-names = "default";
  709         pinctrl-0 = <&sleep0>;
  710 
  711         tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
  712                 samsung,pins = "gpb-5";
  713                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  714                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  715         };
  716 
  717         tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
  718                 samsung,pins = "gpb-7";
  719                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  720                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  721         };
  722 
  723         lcd_enable: lcd-enable-pins {
  724                 samsung,pins = "gpc0-1";
  725                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  726                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  727         };
  728 
  729         sleep0: sleep-state {
  730                 PIN_SLP(gpa0-0, INPUT, NONE);
  731                 PIN_SLP(gpa0-1, OUT0, NONE);
  732                 PIN_SLP(gpa0-2, INPUT, NONE);
  733                 PIN_SLP(gpa0-3, INPUT, UP);
  734                 PIN_SLP(gpa0-4, INPUT, NONE);
  735                 PIN_SLP(gpa0-5, INPUT, DOWN);
  736                 PIN_SLP(gpa0-6, INPUT, DOWN);
  737                 PIN_SLP(gpa0-7, INPUT, UP);
  738 
  739                 PIN_SLP(gpa1-0, INPUT, DOWN);
  740                 PIN_SLP(gpa1-1, INPUT, DOWN);
  741                 PIN_SLP(gpa1-2, INPUT, DOWN);
  742                 PIN_SLP(gpa1-3, INPUT, DOWN);
  743                 PIN_SLP(gpa1-4, INPUT, DOWN);
  744                 PIN_SLP(gpa1-5, INPUT, DOWN);
  745 
  746                 PIN_SLP(gpb-0, INPUT, NONE);
  747                 PIN_SLP(gpb-1, INPUT, NONE);
  748                 PIN_SLP(gpb-2, INPUT, NONE);
  749                 PIN_SLP(gpb-3, INPUT, NONE);
  750                 PIN_SLP(gpb-4, INPUT, DOWN);
  751                 PIN_SLP(gpb-5, INPUT, DOWN);
  752                 PIN_SLP(gpb-6, INPUT, DOWN);
  753                 PIN_SLP(gpb-7, INPUT, DOWN);
  754 
  755                 PIN_SLP(gpc0-0, INPUT, DOWN);
  756                 PIN_SLP(gpc0-1, INPUT, DOWN);
  757                 PIN_SLP(gpc0-2, INPUT, DOWN);
  758                 PIN_SLP(gpc0-3, INPUT, DOWN);
  759                 PIN_SLP(gpc0-4, INPUT, DOWN);
  760 
  761                 PIN_SLP(gpc1-0, INPUT, UP);
  762                 PIN_SLP(gpc1-1, PREV, NONE);
  763                 PIN_SLP(gpc1-2, INPUT, UP);
  764                 PIN_SLP(gpc1-3, INPUT, UP);
  765                 PIN_SLP(gpc1-4, INPUT, UP);
  766 
  767                 PIN_SLP(gpd0-0, INPUT, DOWN);
  768                 PIN_SLP(gpd0-1, OUT0, NONE);
  769                 PIN_SLP(gpd0-2, INPUT, NONE);
  770                 PIN_SLP(gpd0-3, INPUT, NONE);
  771 
  772                 PIN_SLP(gpd1-0, INPUT, DOWN);
  773                 PIN_SLP(gpd1-1, INPUT, DOWN);
  774                 PIN_SLP(gpd1-2, INPUT, NONE);
  775                 PIN_SLP(gpd1-3, INPUT, NONE);
  776 
  777                 PIN_SLP(gpf0-0, OUT0, NONE);
  778                 PIN_SLP(gpf0-1, OUT0, NONE);
  779                 PIN_SLP(gpf0-2, OUT0, NONE);
  780                 PIN_SLP(gpf0-3, OUT0, NONE);
  781                 PIN_SLP(gpf0-4, OUT0, NONE);
  782                 PIN_SLP(gpf0-5, OUT0, NONE);
  783                 PIN_SLP(gpf0-6, OUT0, NONE);
  784                 PIN_SLP(gpf0-7, OUT0, NONE);
  785 
  786                 PIN_SLP(gpf1-0, OUT0, NONE);
  787                 PIN_SLP(gpf1-1, OUT0, NONE);
  788                 PIN_SLP(gpf1-2, OUT0, NONE);
  789                 PIN_SLP(gpf1-3, OUT0, NONE);
  790                 PIN_SLP(gpf1-4, OUT0, NONE);
  791                 PIN_SLP(gpf1-5, OUT0, NONE);
  792                 PIN_SLP(gpf1-6, OUT0, NONE);
  793                 PIN_SLP(gpf1-7, OUT0, NONE);
  794 
  795                 PIN_SLP(gpf2-0, OUT0, NONE);
  796                 PIN_SLP(gpf2-1, OUT0, NONE);
  797                 PIN_SLP(gpf2-2, OUT0, NONE);
  798                 PIN_SLP(gpf2-3, OUT0, NONE);
  799                 PIN_SLP(gpf2-4, OUT0, NONE);
  800                 PIN_SLP(gpf2-5, OUT0, NONE);
  801                 PIN_SLP(gpf2-6, OUT0, NONE);
  802                 PIN_SLP(gpf2-7, OUT0, NONE);
  803 
  804                 PIN_SLP(gpf3-0, OUT0, NONE);
  805                 PIN_SLP(gpf3-1, OUT0, NONE);
  806                 PIN_SLP(gpf3-2, OUT0, NONE);
  807                 PIN_SLP(gpf3-3, OUT0, NONE);
  808                 PIN_SLP(gpf3-4, OUT0, NONE);
  809                 PIN_SLP(gpf3-5, OUT0, NONE);
  810 
  811                 PIN_SLP(gpj0-0, INPUT, DOWN);
  812                 PIN_SLP(gpj0-1, INPUT, DOWN);
  813                 PIN_SLP(gpj0-2, INPUT, DOWN);
  814                 PIN_SLP(gpj0-3, PREV, NONE);
  815                 PIN_SLP(gpj0-4, PREV, NONE);
  816                 PIN_SLP(gpj0-5, OUT0, NONE);
  817                 PIN_SLP(gpj0-6, OUT0, NONE);
  818                 PIN_SLP(gpj0-7, OUT0, NONE);
  819 
  820                 PIN_SLP(gpj1-0, OUT0, NONE);
  821                 PIN_SLP(gpj1-1, INPUT, DOWN);
  822                 PIN_SLP(gpj1-2, PREV, NONE);
  823                 PIN_SLP(gpj1-3, OUT0, NONE);
  824         };
  825 };
  826 
  827 &pinctrl_1 {
  828         pinctrl-names = "default";
  829         pinctrl-0 = <&sleep1>;
  830 
  831         sd3_wifi: sd3-wifi-pins {
  832                 samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
  833                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
  834                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  835         };
  836 
  837         bt_shutdown: bt-shutdown-pins {
  838                 samsung,pins = "gpl0-6";
  839                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  840                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  841         };
  842 
  843         uart_sel: uart-sel-pins {
  844                 samsung,pins = "gpl2-7";
  845                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  846                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  847                 samsung,pin-val = <1>;
  848                 /* 0 = CP, 1 = AP (serial output) */
  849         };
  850 
  851         led_bl_reset: led-bl-reset-pins {
  852                 samsung,pins = "gpm0-1";
  853                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  854                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  855         };
  856 
  857         tsp_rst: tsp-rst-pins {
  858                 samsung,pins = "gpm0-4";
  859                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  860                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  861         };
  862 
  863         lvds_nshdn: lvds-nshdn-pins {
  864                 samsung,pins = "gpm0-5";
  865                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  866                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  867         };
  868 
  869         tsp_irq: tsp-irq-pins {
  870                 samsung,pins = "gpm2-3";
  871                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
  872                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  873         };
  874 
  875         wifi_reset: wifi-reset-pins {
  876                 samsung,pins = "gpm3-5";
  877                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  878                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  879         };
  880 
  881         tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
  882                 samsung,pins = "gpm4-5";
  883                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  884                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  885         };
  886 
  887         ak8975_irq: ak8975-irq-pins {
  888                 samsung,pins = "gpm4-7";
  889                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
  890                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
  891         };
  892 
  893         stmpe_adc_irq: stmpe-adc-irq-pins {
  894                 samsung,pins = "gpx0-1";
  895                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
  896                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  897         };
  898 
  899         max77686_irq: max77686-irq-pins {
  900                 samsung,pins = "gpx0-7";
  901                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  902         };
  903 
  904         gpio_keys: gpio-keys-pins {
  905                 samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
  906                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  907         };
  908 
  909         fuel_alert_irq: fuel-alert-irq-pins {
  910                 samsung,pins = "gpx2-3";
  911                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
  912                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  913         };
  914 
  915         wifi_host_wake: wifi-host-wake-pins {
  916                 samsung,pins = "gpx2-5";
  917                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
  918                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
  919         };
  920 
  921         bt_host_wakeup: bt-host-wakeup-pins {
  922                 samsung,pins = "gpx2-6";
  923                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
  924                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  925         };
  926 
  927         bt_device_wakeup: bt-device-wakeup-pins {
  928                 samsung,pins = "gpx3-1";
  929                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
  930                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  931         };
  932 
  933         sdhci2_cd: sdhci2-cd-pins {
  934                 samsung,pins = "gpx3-4";
  935                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
  936         };
  937 
  938         sleep1: sleep-state {
  939                 PIN_SLP(gpk0-0, PREV, NONE);
  940                 PIN_SLP(gpk0-1, PREV, NONE);
  941                 PIN_SLP(gpk0-2, PREV, NONE);
  942                 PIN_SLP(gpk0-3, PREV, NONE);
  943                 PIN_SLP(gpk0-4, PREV, NONE);
  944                 PIN_SLP(gpk0-5, PREV, NONE);
  945                 PIN_SLP(gpk0-6, PREV, NONE);
  946 
  947                 PIN_SLP(gpk1-0, INPUT, DOWN);
  948                 PIN_SLP(gpk1-1, INPUT, DOWN);
  949                 PIN_SLP(gpk1-2, INPUT, DOWN);
  950                 PIN_SLP(gpk1-3, PREV, NONE);
  951                 PIN_SLP(gpk1-4, PREV, NONE);
  952                 PIN_SLP(gpk1-5, PREV, NONE);
  953                 PIN_SLP(gpk1-6, PREV, NONE);
  954 
  955                 PIN_SLP(gpk2-0, INPUT, DOWN);
  956                 PIN_SLP(gpk2-1, INPUT, DOWN);
  957                 PIN_SLP(gpk2-2, INPUT, DOWN);
  958                 PIN_SLP(gpk2-3, INPUT, DOWN);
  959                 PIN_SLP(gpk2-4, INPUT, DOWN);
  960                 PIN_SLP(gpk2-5, INPUT, DOWN);
  961                 PIN_SLP(gpk2-6, INPUT, DOWN);
  962 
  963                 PIN_SLP(gpk3-0, OUT0, NONE);
  964                 PIN_SLP(gpk3-1, INPUT, NONE);
  965                 PIN_SLP(gpk3-2, INPUT, DOWN);
  966                 PIN_SLP(gpk3-3, INPUT, NONE);
  967                 PIN_SLP(gpk3-4, INPUT, NONE);
  968                 PIN_SLP(gpk3-5, INPUT, NONE);
  969                 PIN_SLP(gpk3-6, INPUT, NONE);
  970 
  971                 PIN_SLP(gpl0-0, OUT0, NONE);
  972                 PIN_SLP(gpl0-1, INPUT, NONE);
  973                 PIN_SLP(gpl0-2, INPUT, NONE);
  974                 PIN_SLP(gpl0-3, INPUT, DOWN);
  975                 PIN_SLP(gpl0-4, PREV, NONE);
  976                 PIN_SLP(gpl0-6, PREV, NONE);
  977 
  978                 PIN_SLP(gpl1-0, OUT0, NONE);
  979                 PIN_SLP(gpl1-1, OUT0, NONE);
  980 
  981                 PIN_SLP(gpl2-0, INPUT, DOWN);
  982                 PIN_SLP(gpl2-1, INPUT, DOWN);
  983                 PIN_SLP(gpl2-2, INPUT, DOWN);
  984                 PIN_SLP(gpl2-3, INPUT, DOWN);
  985                 PIN_SLP(gpl2-4, OUT0, NONE);
  986                 PIN_SLP(gpl2-5, INPUT, DOWN);
  987                 PIN_SLP(gpl2-6, PREV, NONE);
  988                 PIN_SLP(gpl2-7, PREV, NONE);
  989 
  990                 PIN_SLP(gpm0-0, PREV, NONE);
  991                 PIN_SLP(gpm0-1, OUT0, NONE);
  992                 PIN_SLP(gpm0-2, INPUT, DOWN);
  993                 PIN_SLP(gpm0-3, INPUT, NONE);
  994                 PIN_SLP(gpm0-4, OUT0, NONE);
  995                 PIN_SLP(gpm0-5, OUT0, NONE);
  996                 PIN_SLP(gpm0-6, INPUT, DOWN);
  997                 PIN_SLP(gpm0-7, OUT0, NONE);
  998 
  999                 PIN_SLP(gpm1-0, INPUT, NONE);
 1000                 PIN_SLP(gpm1-1, INPUT, NONE);
 1001                 PIN_SLP(gpm1-2, INPUT, NONE);
 1002                 PIN_SLP(gpm1-3, INPUT, NONE);
 1003                 PIN_SLP(gpm1-4, INPUT, NONE);
 1004                 PIN_SLP(gpm1-5, INPUT, NONE);
 1005                 PIN_SLP(gpm1-6, INPUT, DOWN);
 1006 
 1007                 PIN_SLP(gpm2-0, INPUT, NONE);
 1008                 PIN_SLP(gpm2-1, INPUT, NONE);
 1009                 PIN_SLP(gpm2-2, OUT0, NONE);
 1010                 PIN_SLP(gpm2-3, OUT0, DOWN);
 1011                 PIN_SLP(gpm2-4, INPUT, DOWN);
 1012 
 1013                 PIN_SLP(gpm3-0, PREV, NONE);
 1014                 PIN_SLP(gpm3-1, PREV, NONE);
 1015                 PIN_SLP(gpm3-2, PREV, NONE);
 1016                 PIN_SLP(gpm3-3, OUT1, NONE);
 1017                 PIN_SLP(gpm3-4, OUT0, DOWN);
 1018                 PIN_SLP(gpm3-5, PREV, NONE);
 1019                 PIN_SLP(gpm3-6, PREV, NONE);
 1020                 PIN_SLP(gpm3-7, OUT0, NONE);
 1021 
 1022                 PIN_SLP(gpm4-0, INPUT, NONE);
 1023                 PIN_SLP(gpm4-1, INPUT, NONE);
 1024                 PIN_SLP(gpm4-2, INPUT, DOWN);
 1025                 PIN_SLP(gpm4-3, INPUT, DOWN);
 1026                 PIN_SLP(gpm4-4, PREV, NONE);
 1027                 PIN_SLP(gpm4-5, OUT0, NONE);
 1028                 PIN_SLP(gpm4-6, OUT0, NONE);
 1029                 PIN_SLP(gpm4-7, INPUT, DOWN);
 1030 
 1031                 PIN_SLP(gpy0-0, INPUT, DOWN);
 1032                 PIN_SLP(gpy0-1, INPUT, DOWN);
 1033                 PIN_SLP(gpy0-2, INPUT, NONE);
 1034                 PIN_SLP(gpy0-3, INPUT, NONE);
 1035                 PIN_SLP(gpy0-4, INPUT, NONE);
 1036                 PIN_SLP(gpy0-5, INPUT, NONE);
 1037 
 1038                 PIN_SLP(gpy1-0, INPUT, DOWN);
 1039                 PIN_SLP(gpy1-1, INPUT, DOWN);
 1040                 PIN_SLP(gpy1-2, INPUT, DOWN);
 1041                 PIN_SLP(gpy1-3, INPUT, DOWN);
 1042 
 1043                 PIN_SLP(gpy2-0, PREV, NONE);
 1044                 PIN_SLP(gpy2-1, INPUT, DOWN);
 1045                 PIN_SLP(gpy2-2, INPUT, NONE);
 1046                 PIN_SLP(gpy2-3, INPUT, NONE);
 1047                 PIN_SLP(gpy2-4, INPUT, NONE);
 1048                 PIN_SLP(gpy2-5, INPUT, NONE);
 1049 
 1050                 PIN_SLP(gpy3-0, INPUT, DOWN);
 1051                 PIN_SLP(gpy3-1, INPUT, DOWN);
 1052                 PIN_SLP(gpy3-2, INPUT, DOWN);
 1053                 PIN_SLP(gpy3-3, INPUT, DOWN);
 1054                 PIN_SLP(gpy3-4, INPUT, DOWN);
 1055                 PIN_SLP(gpy3-5, INPUT, DOWN);
 1056                 PIN_SLP(gpy3-6, INPUT, DOWN);
 1057                 PIN_SLP(gpy3-7, INPUT, DOWN);
 1058 
 1059                 PIN_SLP(gpy4-0, INPUT, DOWN);
 1060                 PIN_SLP(gpy4-1, INPUT, DOWN);
 1061                 PIN_SLP(gpy4-2, INPUT, DOWN);
 1062                 PIN_SLP(gpy4-3, INPUT, DOWN);
 1063                 PIN_SLP(gpy4-4, INPUT, DOWN);
 1064                 PIN_SLP(gpy4-5, INPUT, DOWN);
 1065                 PIN_SLP(gpy4-6, INPUT, DOWN);
 1066                 PIN_SLP(gpy4-7, INPUT, DOWN);
 1067 
 1068                 PIN_SLP(gpy5-0, INPUT, DOWN);
 1069                 PIN_SLP(gpy5-1, INPUT, DOWN);
 1070                 PIN_SLP(gpy5-2, INPUT, DOWN);
 1071                 PIN_SLP(gpy5-3, INPUT, DOWN);
 1072                 PIN_SLP(gpy5-4, INPUT, DOWN);
 1073                 PIN_SLP(gpy5-5, INPUT, DOWN);
 1074                 PIN_SLP(gpy5-6, INPUT, DOWN);
 1075                 PIN_SLP(gpy5-7, INPUT, DOWN);
 1076 
 1077                 PIN_SLP(gpy6-0, INPUT, DOWN);
 1078                 PIN_SLP(gpy6-1, INPUT, DOWN);
 1079                 PIN_SLP(gpy6-2, INPUT, DOWN);
 1080                 PIN_SLP(gpy6-3, INPUT, DOWN);
 1081                 PIN_SLP(gpy6-4, INPUT, DOWN);
 1082                 PIN_SLP(gpy6-5, INPUT, DOWN);
 1083                 PIN_SLP(gpy6-6, INPUT, DOWN);
 1084                 PIN_SLP(gpy6-7, INPUT, DOWN);
 1085         };
 1086 };
 1087 
 1088 &pinctrl_2 {
 1089         pinctrl-names = "default";
 1090         pinctrl-0 = <&sleep2>;
 1091 
 1092         sleep2: sleep-state {
 1093                 PIN_SLP(gpz-0, INPUT, DOWN);
 1094                 PIN_SLP(gpz-1, INPUT, DOWN);
 1095                 PIN_SLP(gpz-2, INPUT, DOWN);
 1096                 PIN_SLP(gpz-3, INPUT, DOWN);
 1097                 PIN_SLP(gpz-4, INPUT, DOWN);
 1098                 PIN_SLP(gpz-5, INPUT, DOWN);
 1099                 PIN_SLP(gpz-6, INPUT, DOWN);
 1100         };
 1101 };
 1102 
 1103 &pinctrl_3 {
 1104         pinctrl-names = "default";
 1105         pinctrl-0 = <&sleep3>;
 1106 
 1107         sleep3: sleep-state {
 1108                 PIN_SLP(gpv0-0, INPUT, DOWN);
 1109                 PIN_SLP(gpv0-1, INPUT, DOWN);
 1110                 PIN_SLP(gpv0-2, INPUT, DOWN);
 1111                 PIN_SLP(gpv0-3, INPUT, DOWN);
 1112                 PIN_SLP(gpv0-4, INPUT, DOWN);
 1113                 PIN_SLP(gpv0-5, INPUT, DOWN);
 1114                 PIN_SLP(gpv0-6, INPUT, DOWN);
 1115                 PIN_SLP(gpv0-7, INPUT, DOWN);
 1116 
 1117                 PIN_SLP(gpv1-0, INPUT, DOWN);
 1118                 PIN_SLP(gpv1-1, INPUT, DOWN);
 1119                 PIN_SLP(gpv1-2, INPUT, DOWN);
 1120                 PIN_SLP(gpv1-3, INPUT, DOWN);
 1121                 PIN_SLP(gpv1-4, INPUT, DOWN);
 1122                 PIN_SLP(gpv1-5, INPUT, DOWN);
 1123                 PIN_SLP(gpv1-6, INPUT, DOWN);
 1124                 PIN_SLP(gpv1-7, INPUT, DOWN);
 1125 
 1126                 PIN_SLP(gpv2-0, INPUT, DOWN);
 1127                 PIN_SLP(gpv2-1, INPUT, DOWN);
 1128                 PIN_SLP(gpv2-2, INPUT, DOWN);
 1129                 PIN_SLP(gpv2-3, INPUT, DOWN);
 1130                 PIN_SLP(gpv2-4, INPUT, DOWN);
 1131                 PIN_SLP(gpv2-5, INPUT, DOWN);
 1132                 PIN_SLP(gpv2-6, INPUT, DOWN);
 1133                 PIN_SLP(gpv2-7, INPUT, DOWN);
 1134 
 1135                 PIN_SLP(gpv3-0, INPUT, DOWN);
 1136                 PIN_SLP(gpv3-1, INPUT, DOWN);
 1137                 PIN_SLP(gpv3-2, INPUT, DOWN);
 1138                 PIN_SLP(gpv3-3, INPUT, DOWN);
 1139                 PIN_SLP(gpv3-4, INPUT, DOWN);
 1140                 PIN_SLP(gpv3-5, INPUT, DOWN);
 1141                 PIN_SLP(gpv3-6, INPUT, DOWN);
 1142                 PIN_SLP(gpv3-7, INPUT, DOWN);
 1143 
 1144                 PIN_SLP(gpv4-0, INPUT, DOWN);
 1145                 PIN_SLP(gpv4-1, INPUT, DOWN);
 1146         };
 1147 };
 1148 
 1149 &pmu_system_controller {
 1150         assigned-clocks = <&pmu_system_controller 0>;
 1151         assigned-clock-parents = <&clock CLK_XUSBXTI>;
 1152 };
 1153 
 1154 &pwm {
 1155         pinctrl-0 = <&pwm1_out>;
 1156         pinctrl-names = "default";
 1157         samsung,pwm-outputs = <1>;
 1158         status = "okay";
 1159 };
 1160 
 1161 &rtc {
 1162         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
 1163         clock-names = "rtc", "rtc_src";
 1164         status = "okay";
 1165 };
 1166 
 1167 &sdhci_2 {
 1168         bus-width = <4>;
 1169         cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
 1170         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
 1171         pinctrl-names = "default";
 1172         vmmc-supply = <&ldo21_reg>;
 1173         status = "okay";
 1174 };
 1175 
 1176 &sdhci_3 {
 1177         #address-cells = <1>;
 1178         #size-cells = <0>;
 1179         non-removable;
 1180         bus-width = <4>;
 1181         mmc-pwrseq = <&wlan_pwrseq>;
 1182 
 1183         pinctrl-names = "default";
 1184         pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi>;
 1185         status = "okay";
 1186 
 1187         wifi@1 {
 1188                 compatible = "brcm,bcm4329-fmac";
 1189                 reg = <0x1>;
 1190                 pinctrl-names = "default";
 1191                 pinctrl-0 = <&wifi_host_wake>;
 1192                 interrupt-parent = <&gpx2>;
 1193                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 1194                 interrupt-names = "host-wake";
 1195         };
 1196 };
 1197 
 1198 &serial_0 {
 1199         pinctrl-0 = <&uart0_data &uart0_fctl>;
 1200         pinctrl-names = "default";
 1201         status = "okay";
 1202 
 1203         bluetooth {
 1204                 compatible = "brcm,bcm4330-bt";
 1205                 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
 1206                 pinctrl-names = "default";
 1207 
 1208                 max-speed = <2000000>;
 1209                 shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
 1210                 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
 1211                 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 1212                 clocks = <&max77686 MAX77686_CLK_PMIC>;
 1213                 clock-names = "lpo";
 1214         };
 1215 };
 1216 
 1217 &serial_2 {
 1218         pinctrl-0 = <&uart_sel>;
 1219         pinctrl-names = "default";
 1220         status = "okay";
 1221 };
 1222 
 1223 &tmu {
 1224         status = "okay";
 1225 };
Cache object: 4826a0acb9d52d26162b96c7ab97e10c
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/exynos4412-p4note.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/exynos4412-p4note.dtsi
