imx28-eukrea-mbmx283lc.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-or-later
    2 /*
    3  * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
    4  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
    5  */
    6 
    7 /*
    8  * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
    9  */
   10 
   11 /dts-v1/;
   12 #include "imx28-eukrea-mbmx28lc.dtsi"
   13 
   14 / {
   15         model = "Eukrea Electromatique MBMX283LC";
   16         compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
   17 
   18         memory@40000000 {
   19                 device_type = "memory";
   20                 reg = <0x40000000 0x04000000>;
   21         };
   22 };
   23 
   24 &gpmi {
   25         pinctrl-names = "default";
   26         pinctrl-0 = <&gpmi_pins_a>;
   27         status = "okay";
   28 };
   29 
   30 &i2c0 {
   31         pinctrl-names = "default";
   32         pinctrl-0 = <&i2c0_pins_a>;
   33         status = "okay";
   34 
   35         pcf8563: rtc@51 {
   36                 compatible = "nxp,pcf8563";
   37                 reg = <0x51>;
   38         };
   39 };
   40 
   41 
   42 &mac0 {
   43         phy-mode = "rmii";
   44         pinctrl-names = "default";
   45         pinctrl-0 = <&mac0_pins_a>;
   46         phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
   47         status = "okay";
   48 };
   49 
   50 &pinctrl{
   51         pinctrl-names = "default";
   52         pinctrl-0 = <&hog_pins_cpuimx283>;
   53 
   54         hog_pins_cpuimx283: hog-cpuimx283@0 {
   55                 reg = <0>;
   56                 fsl,pinmux-ids = <
   57                         MX28_PAD_ENET0_RX_CLK__GPIO_4_13
   58                         MX28_PAD_ENET0_TX_CLK__GPIO_4_5
   59                 >;
   60                 fsl,drive-strength = <MXS_DRIVE_4mA>;
   61                 fsl,voltage = <MXS_VOLTAGE_HIGH>;
   62                 fsl,pull-up = <MXS_PULL_ENABLE>;
   63         };
   64 };

Cache object: 5ff65f413bf2e36f68b5c8c1cd714e61

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/imx28-eukrea-mbmx283lc.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/imx28-eukrea-mbmx283lc.dts