imx6dl-prtvt7.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
    2 /*
    3  * Copyright (c) 2016 Protonic Holland
    4  */
    5 
    6 /dts-v1/;
    7 #include "imx6dl.dtsi"
    8 #include "imx6qdl-prti6q.dtsi"
    9 #include <dt-bindings/display/sdtv-standards.h>
   10 #include <dt-bindings/input/input.h>
   11 #include <dt-bindings/leds/common.h>
   12 #include <dt-bindings/sound/fsl-imx-audmux.h>
   13 
   14 / {
   15         model = "Protonic VT7";
   16         compatible = "prt,prtvt7", "fsl,imx6dl";
   17 
   18         memory@10000000 {
   19                 device_type = "memory";
   20                 reg = <0x10000000 0x20000000>;
   21         };
   22 
   23         backlight_lcd: backlight-lcd {
   24                 compatible = "pwm-backlight";
   25                 pwms = <&pwm1 0 500000 0>;
   26                 brightness-levels = <0 20 81 248 1000>;
   27                 default-brightness-level = <20>;
   28                 num-interpolated-steps = <21>;
   29                 power-supply = <&reg_bl_12v0>;
   30         };
   31 
   32         display {
   33                 compatible = "fsl,imx-parallel-display";
   34                 pinctrl-0 = <&pinctrl_ipu1_disp>;
   35                 pinctrl-names = "default";
   36                 #address-cells = <1>;
   37                 #size-cells = <0>;
   38 
   39                 port@0 {
   40                         reg = <0>;
   41 
   42                         display_in: endpoint {
   43                                 remote-endpoint = <&ipu1_di0_disp0>;
   44                         };
   45                 };
   46 
   47                 port@1 {
   48                         reg = <1>;
   49 
   50                         display_out: endpoint {
   51                                 remote-endpoint = <&panel_in>;
   52                         };
   53                 };
   54         };
   55 
   56         iio-hwmon {
   57                 compatible = "iio-hwmon";
   58                 io-channels = <&vdiv_vaccu>;
   59         };
   60 
   61         keys {
   62                 compatible = "gpio-keys";
   63                 autorepeat;
   64 
   65                 esc {
   66                         label = "GPIO Key ESC";
   67                         linux,code = <KEY_ESC>;
   68                         gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
   69                 };
   70 
   71                 up {
   72                         label = "GPIO Key UP";
   73                         linux,code = <KEY_UP>;
   74                         gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
   75                 };
   76 
   77                 down {
   78                         label = "GPIO Key DOWN";
   79                         linux,code = <KEY_DOWN>;
   80                         gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
   81                 };
   82 
   83                 enter {
   84                         label = "GPIO Key Enter";
   85                         linux,code = <KEY_ENTER>;
   86                         gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
   87                 };
   88 
   89                 cycle {
   90                         label = "GPIO Key CYCLE";
   91                         linux,code = <KEY_CYCLEWINDOWS>;
   92                         gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
   93                 };
   94 
   95                 f1 {
   96                         label = "GPIO Key F1";
   97                         linux,code = <KEY_F1>;
   98                         gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
   99                 };
  100 
  101                 f2 {
  102                         label = "GPIO Key F2";
  103                         linux,code = <KEY_F2>;
  104                         gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
  105                 };
  106 
  107                 f3 {
  108                         label = "GPIO Key F3";
  109                         linux,code = <KEY_F3>;
  110                         gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
  111                 };
  112 
  113                 f4 {
  114                         label = "GPIO Key F4";
  115                         linux,code = <KEY_F4>;
  116                         gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
  117                 };
  118 
  119                 f5 {
  120                         label = "GPIO Key F5";
  121                         linux,code = <KEY_F5>;
  122                         gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
  123                 };
  124 
  125                 f6 {
  126                         label = "GPIO Key F6";
  127                         linux,code = <KEY_F6>;
  128                         gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
  129                 };
  130 
  131                 f7 {
  132                         label = "GPIO Key F7";
  133                         linux,code = <KEY_F7>;
  134                         gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
  135                 };
  136 
  137                 f8 {
  138                         label = "GPIO Key F8";
  139                         linux,code = <KEY_F8>;
  140                         gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
  141                 };
  142 
  143                 f9 {
  144                         label = "GPIO Key F9";
  145                         linux,code = <KEY_F9>;
  146                         gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
  147                 };
  148 
  149                 f10 {
  150                         label = "GPIO Key F10";
  151                         linux,code = <KEY_F10>;
  152                         gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
  153                 };
  154         };
  155 
  156         leds {
  157                 compatible = "gpio-leds";
  158                 pinctrl-names = "default";
  159                 pinctrl-0 = <&pinctrl_leds>;
  160 
  161                 led-debug0 {
  162                         function = LED_FUNCTION_STATUS;
  163                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
  164                         linux,default-trigger = "heartbeat";
  165                 };
  166         };
  167 
  168         panel {
  169                 compatible = "innolux,g070y2-t02";
  170                 backlight = <&backlight_lcd>;
  171                 power-supply = <&reg_3v3>;
  172 
  173                 port {
  174                         panel_in: endpoint {
  175                                 remote-endpoint = <&display_out>;
  176                         };
  177                 };
  178         };
  179 
  180         connector {
  181                 compatible = "composite-video-connector";
  182                 label = "Composite0";
  183                 sdtv-standards = <SDTV_STD_PAL_B>;
  184 
  185                 port {
  186                         comp0_out: endpoint {
  187                                 remote-endpoint = <&tvp5150_comp0_in>;
  188                         };
  189                 };
  190         };
  191 
  192         reg_bl_12v0: regulator-bl-12v0 {
  193                 compatible = "regulator-fixed";
  194                 pinctrl-names = "default";
  195                 pinctrl-0 = <&pinctrl_reg_bl_12v0>;
  196                 regulator-name = "bl-12v0";
  197                 regulator-min-microvolt = <12000000>;
  198                 regulator-max-microvolt = <12000000>;
  199                 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  200                 enable-active-high;
  201         };
  202 
  203         reg_3v3: regulator-3v3 {
  204                 compatible = "regulator-fixed";
  205                 regulator-name = "3v3";
  206                 regulator-min-microvolt = <3300000>;
  207                 regulator-max-microvolt = <3300000>;
  208         };
  209 
  210         reg_1v8: regulator-1v8 {
  211                 compatible = "regulator-fixed";
  212                 regulator-name = "1v8";
  213                 regulator-min-microvolt = <1800000>;
  214                 regulator-max-microvolt = <1800000>;
  215         };
  216 
  217         sound {
  218                 compatible = "simple-audio-card";
  219                 simple-audio-card,name = "prti6q-sgtl5000";
  220                 simple-audio-card,format = "i2s";
  221                 simple-audio-card,widgets =
  222                         "Microphone", "Microphone Jack",
  223                         "Line", "Line In Jack",
  224                         "Headphone", "Headphone Jack",
  225                         "Speaker", "External Speaker";
  226                 simple-audio-card,routing =
  227                         "MIC_IN", "Microphone Jack",
  228                         "LINE_IN", "Line In Jack",
  229                         "Headphone Jack", "HP_OUT",
  230                         "External Speaker", "LINE_OUT";
  231 
  232                 simple-audio-card,cpu {
  233                         sound-dai = <&ssi1>;
  234                         system-clock-frequency = <0>;
  235                 };
  236 
  237                 simple-audio-card,codec {
  238                         sound-dai = <&sgtl5000>;
  239                         bitclock-master;
  240                         frame-master;
  241                 };
  242         };
  243 
  244         thermal-zones {
  245                 chassis-thermal {
  246                         polling-delay = <20000>;
  247                         polling-delay-passive = <0>;
  248                         thermal-sensors = <&tsens0>;
  249                 };
  250 
  251                 touch-thermal0 {
  252                         polling-delay = <20000>;
  253                         polling-delay-passive = <0>;
  254                         thermal-sensors = <&touch_temp0>;
  255                 };
  256 
  257                 touch-thermal1 {
  258                         polling-delay = <20000>;
  259                         polling-delay-passive = <0>;
  260                         thermal-sensors = <&touch_temp1>;
  261                 };
  262         };
  263 
  264         touchscreen {
  265                 compatible = "resistive-adc-touch";
  266                 io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
  267                               <&adc_ts 5>;
  268                 io-channel-names = "y", "z1", "z2", "x";
  269                 touchscreen-min-pressure = <64687>;
  270                 touchscreen-inverted-x;
  271                 touchscreen-inverted-y;
  272                 touchscreen-x-plate-ohms = <300>;
  273                 touchscreen-y-plate-ohms = <800>;
  274         };
  275 
  276         touch_temp0: touch-temperature-sensor0 {
  277                 compatible = "generic-adc-thermal";
  278                 #thermal-sensor-cells = <0>;
  279                 io-channels = <&adc_ts 0>;
  280                 io-channel-names = "sensor-channel";
  281                 temperature-lookup-table = <    (-40000) 736
  282                                                 85000 474>;
  283         };
  284 
  285         touch_temp1: touch-temperature-sensor1 {
  286                 compatible = "generic-adc-thermal";
  287                 #thermal-sensor-cells = <0>;
  288                 io-channels = <&adc_ts 7>;
  289                 io-channel-names = "sensor-channel";
  290                 temperature-lookup-table = <    (-40000) 826
  291                                                 85000 609>;
  292         };
  293 
  294         vdiv_vaccu: voltage-divider-vaccu {
  295                 compatible = "voltage-divider";
  296                 io-channels = <&adc_ts 2>;
  297                 output-ohms = <2500>;
  298                 full-ohms = <64000>;
  299                 #io-channel-cells = <0>;
  300         };
  301 };
  302 
  303 &audmux {
  304         pinctrl-names = "default";
  305         pinctrl-0 = <&pinctrl_audmux>;
  306         status = "okay";
  307 
  308         mux-ssi1 {
  309                 fsl,audmux-port = <0>;
  310                 fsl,port-config = <
  311                         IMX_AUDMUX_V2_PTCR_SYN          0
  312                         IMX_AUDMUX_V2_PTCR_TFSEL(2)     0
  313                         IMX_AUDMUX_V2_PTCR_TCSEL(2)     0
  314                         IMX_AUDMUX_V2_PTCR_TFSDIR       0
  315                         IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
  316                 >;
  317         };
  318 
  319         mux-pins3 {
  320                 fsl,audmux-port = <2>;
  321                 fsl,port-config = <
  322                         IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
  323                         0                      IMX_AUDMUX_V2_PDCR_TXRXEN
  324                 >;
  325         };
  326 };
  327 
  328 &can1 {
  329         pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
  330 };
  331 
  332 &clks {
  333         assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
  334         assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
  335 };
  336 
  337 &ecspi2 {
  338         cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
  339         pinctrl-names = "default";
  340         pinctrl-0 = <&pinctrl_ecspi2>;
  341         status = "okay";
  342 
  343         adc_ts: adc@0 {
  344                 compatible = "ti,tsc2046e-adc";
  345                 reg = <0>;
  346                 pinctrl-0 = <&pinctrl_tsc>;
  347                 pinctrl-names = "default";
  348                 spi-max-frequency = <1000000>;
  349                 interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
  350                 #io-channel-cells = <1>;
  351 
  352                 #address-cells = <1>;
  353                 #size-cells = <0>;
  354 
  355                 channel@1 {
  356                         reg = <1>;
  357                         settling-time-us = <700>;
  358                         oversampling-ratio = <5>;
  359                 };
  360 
  361                 channel@3 {
  362                         reg = <3>;
  363                         settling-time-us = <700>;
  364                         oversampling-ratio = <5>;
  365                 };
  366 
  367                 channel@4 {
  368                         reg = <4>;
  369                         settling-time-us = <700>;
  370                         oversampling-ratio = <5>;
  371                 };
  372 
  373                 channel@5 {
  374                         reg = <5>;
  375                         settling-time-us = <700>;
  376                         oversampling-ratio = <5>;
  377                 };
  378         };
  379 };
  380 
  381 &i2c1 {
  382         sgtl5000: audio-codec@a {
  383                 compatible = "fsl,sgtl5000";
  384                 reg = <0xa>;
  385                 pinctrl-names = "default";
  386                 pinctrl-0 = <&pinctrl_codec>;
  387                 #sound-dai-cells = <0>;
  388                 clocks = <&clks 201>;
  389                 VDDA-supply = <&reg_3v3>;
  390                 VDDIO-supply = <&reg_3v3>;
  391                 VDDD-supply = <&reg_1v8>;
  392         };
  393 
  394         video@5c {
  395                 compatible = "ti,tvp5150";
  396                 reg = <0x5c>;
  397 
  398                 #address-cells = <1>;
  399                 #size-cells = <0>;
  400 
  401                 port@0 {
  402                         reg = <0>;
  403 
  404                         tvp5150_comp0_in: endpoint {
  405                                 remote-endpoint = <&comp0_out>;
  406                         };
  407                 };
  408 
  409                 /* Output port 2 is video output pad */
  410                 port@2 {
  411                         reg = <2>;
  412 
  413                         tvp5151_to_ipu1_csi0_mux: endpoint {
  414                                 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
  415                         };
  416                 };
  417         };
  418 };
  419 
  420 &i2c3 {
  421         rtc@51 {
  422                 compatible = "nxp,pcf8563";
  423                 reg = <0x51>;
  424         };
  425 
  426         tsens0: temperature-sensor@70 {
  427                 compatible = "ti,tmp103";
  428                 reg = <0x70>;
  429                 #thermal-sensor-cells = <0>;
  430         };
  431 
  432         gpio_pca: gpio@74 {
  433                 compatible = "nxp,pca9539";
  434                 reg = <0x74>;
  435                 interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
  436                 #gpio-cells = <2>;
  437                 gpio-controller;
  438         };
  439 };
  440 
  441 &ipu1 {
  442         pinctrl-names = "default";
  443         pinctrl-0 = <&pinctrl_ipu1_csi0>;
  444         status = "okay";
  445 };
  446 
  447 &ipu1_di0_disp0 {
  448         remote-endpoint = <&display_in>;
  449 };
  450 
  451 &ipu1_csi0_mux_from_parallel_sensor {
  452         remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
  453 };
  454 
  455 &pwm1 {
  456         pinctrl-names = "default";
  457         pinctrl-0 = <&pinctrl_pwm1>;
  458         status = "okay";
  459 };
  460 
  461 &snvs_poweroff {
  462         status = "okay";
  463 };
  464 
  465 &snvs_pwrkey {
  466         status = "okay";
  467 };
  468 
  469 &ssi1 {
  470         status = "okay";
  471 };
  472 
  473 &usbh1 {
  474         status = "disabled";
  475 };
  476 
  477 &iomuxc {
  478         pinctrl_audmux: audmuxgrp {
  479                 fsl,pins = <
  480                         MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1         0x030b0
  481                         MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
  482                         MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
  483                         MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
  484                         MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
  485                 >;
  486         };
  487 
  488         pinctrl_can1phy: can1phy {
  489                 fsl,pins = <
  490                         /* CAN1_SR */
  491                         MX6QDL_PAD_KEY_COL3__GPIO4_IO12         0x13070
  492                         /* CAN1_TERM */
  493                         MX6QDL_PAD_GPIO_0__GPIO1_IO00           0x1b0b0
  494                 >;
  495         };
  496 
  497         pinctrl_codec: codecgrp {
  498                 fsl,pins = <
  499                         /* AUDIO_nRESET */
  500                         MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21       0x1f0b0
  501                 >;
  502         };
  503 
  504         pinctrl_ecspi2: ecspi2grp {
  505                 fsl,pins = <
  506                         MX6QDL_PAD_EIM_OE__ECSPI2_MISO          0x100b1
  507                         MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK         0x100b1
  508                         MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI         0x100b1
  509                         MX6QDL_PAD_EIM_RW__GPIO2_IO26           0x000b1
  510                 >;
  511         };
  512 
  513         pinctrl_ipu1_csi0: ipu1csi0grp {
  514                 fsl,pins = <
  515                         MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
  516                         MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
  517                         MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
  518                         MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
  519                         MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
  520                         MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
  521                         MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
  522                         MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
  523                         MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
  524                         /* ITU656_nRESET */
  525                         MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x1b0b0
  526                         /* ITU656_nPDN */
  527                         MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x1b0b0
  528                 >;
  529         };
  530 
  531         pinctrl_ipu1_disp: ipudisp1grp {
  532                 fsl,pins = <
  533                         MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
  534                         MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xb0
  535 
  536                         MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
  537                         MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
  538                         MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
  539                         MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
  540                         MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
  541                         MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
  542                         MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
  543                         MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
  544 
  545                         MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
  546                         MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
  547                         MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
  548                         MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
  549                         MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
  550                         MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
  551                         MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
  552                         MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
  553 
  554                         MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
  555                         MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
  556                         MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
  557                         MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
  558                         MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
  559                         MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
  560                         MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
  561                         MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
  562                 >;
  563         };
  564 
  565         pinctrl_leds: ledsgrp {
  566                 fsl,pins = <
  567                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x1b0b0
  568                 >;
  569         };
  570 
  571         pinctrl_pwm1: pwm1grp {
  572                 fsl,pins = <
  573                         MX6QDL_PAD_GPIO_9__PWM1_OUT             0x1b0b0
  574                 >;
  575         };
  576 
  577         pinctrl_reg_bl_12v0: 12blgrp {
  578                 fsl,pins = <
  579                         MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x1b0b0
  580                 >;
  581         };
  582 
  583         pinctrl_tsc: tscgrp {
  584 
  585                 fsl,pins = <
  586                         MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x1b0b0
  587                         MX6QDL_PAD_EIM_EB2__GPIO2_IO30          0x1b0b0
  588                 >;
  589         };
  590 };
Cache object: 256708d618470128249e79b7362f4f6c
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/imx6dl-prtvt7.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/imx6dl-prtvt7.dts
