imx6q-dms-ba16.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
    2 
    3 /dts-v1/;
    4 
    5 #include <dt-bindings/gpio/gpio.h>
    6 #include "imx6q-ba16.dtsi"
    7 
    8 / {
    9         model = "Advantech DMS-BA16";
   10         compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q";
   11 
   12         reg_usb_otg_vbus: regulator-usbotgvbus {
   13                 compatible = "regulator-fixed";
   14                 regulator-name = "usb_otg_vbus";
   15                 regulator-min-microvolt = <5000000>;
   16                 regulator-max-microvolt = <5000000>;
   17                 pinctrl-names = "default";
   18                 pinctrl-0 = <&pinctrl_usbotgvbus>;
   19                 gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
   20                 enable-active-high;
   21         };
   22 
   23         sys_mclk: clock-sys-mclk {
   24                 compatible = "fixed-clock";
   25                 #clock-cells = <0>;
   26                 clock-frequency = <22000000>;
   27         };
   28 
   29         sound {
   30                 compatible = "fsl,imx6q-ba16-sgtl5000",
   31                              "fsl,imx-audio-sgtl5000";
   32                 model = "imx6q-ba16-sgtl5000";
   33                 ssi-controller = <&ssi1>;
   34                 audio-codec = <&sgtl5000>;
   35                 audio-routing =
   36                         "MIC_IN", "Mic Jack",
   37                         "Mic Jack", "Mic Bias",
   38                         "Headphone Jack", "HP_OUT";
   39                 mux-int-port = <1>;
   40                 mux-ext-port = <4>;
   41         };
   42 };
   43 
   44 &ecspi5 {
   45         cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
   46         pinctrl-names = "default";
   47         pinctrl-0 = <&pinctrl_ecspi5>;
   48         status = "okay";
   49 
   50         m25_eeprom: flash@0 {
   51                 compatible = "atmel,at25256B", "atmel,at25";
   52                 spi-max-frequency = <20000000>;
   53                 size = <0x8000>;
   54                 pagesize = <64>;
   55                 reg = <0>;
   56                 address-width = <16>;
   57         };
   58 };
   59 
   60 &iomuxc {
   61         pinctrl_i2c1_gpio: i2c1gpiogrp {
   62                 fsl,pins = <
   63                         MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26        0x1b0b0
   64                         MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27        0x1b0b0
   65                 >;
   66         };
   67 
   68         pinctrl_i2c2_gpio: i2c2gpiogrp {
   69                 fsl,pins = <
   70                         MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
   71                         MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
   72                 >;
   73         };
   74 
   75         pinctrl_i2c3_gpio: i2c3gpiogrp {
   76                 fsl,pins = <
   77                         MX6QDL_PAD_GPIO_3__GPIO1_IO03   0x1b0b0
   78                         MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
   79                 >;
   80         };
   81 
   82         pinctrl_usbotgvbus: usbotgvbusgrp {
   83                 fsl,pins = <
   84                         MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
   85                         MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
   86                 >;
   87         };
   88 };
   89 
   90 &i2c1 {
   91         clock-frequency = <100000>;
   92         pinctrl-names = "default";
   93         pinctrl-0 = <&pinctrl_i2c1>;
   94         status = "okay";
   95 
   96         sgtl5000: codec@a {
   97                 compatible = "fsl,sgtl5000";
   98                 reg = <0x0a>;
   99                 clocks = <&sys_mclk>;
  100                 lrclk-strength = <0x3>;
  101                 VDDA-supply = <&reg_1p8v>;
  102                 VDDIO-supply = <&reg_3p3v>;
  103         };
  104 };
  105 
  106 &pwm2 {
  107         pinctrl-names = "default";
  108         pinctrl-0 = <&pinctrl_pwm2>;
  109         status = "okay";
  110 };
  111 
  112 &sata {
  113         fsl,no-spread-spectrum;
  114         fsl,transmit-atten-16ths = <12>;
  115         fsl,transmit-boost-mdB = <3330>;
  116         fsl,transmit-level-mV = <1133>;
  117         fsl,receive-dpll-mode = <1>;
  118         status = "okay";
  119 };
  120 
  121 &usbotg {
  122         vbus-supply = <&reg_usb_otg_vbus>;
  123         pinctrl-names = "default";
  124         pinctrl-0 = <&pinctrl_usbotg>;
  125         dr_mode = "otg";
  126         disable-over-current;
  127         status = "okay";
  128 };
  129 
  130 &usdhc4 {
  131         pinctrl-names = "default";
  132         pinctrl-0 = <&pinctrl_usdhc4>;
  133         bus-width = <8>;
  134         cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
  135         no-1-8-v;
  136         keep-power-in-suspend;
  137         wakeup-source;
  138         status = "okay";
  139 };

Cache object: 0cc2c9882c956c566ca18420985bdcb9

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/imx6q-dms-ba16.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/imx6q-dms-ba16.dts