Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/imx6ul-phytec-phycore-som.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2016 PHYTEC Messtechnik GmbH 4 * Author: Christian Hemp <c.hemp@phytec.de> 5 */ 6 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/interrupt-controller/irq.h> 9 #include <dt-bindings/pwm/pwm.h> 10 11 / { 12 model = "PHYTEC phyCORE-i.MX6 UltraLite"; 13 compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; 14 15 chosen { 16 stdout-path = &uart1; 17 }; 18 19 /* 20 * Set the minimum memory size here and 21 * let the bootloader set the real size. 22 */ 23 memory@80000000 { 24 device_type = "memory"; 25 reg = <0x80000000 0x8000000>; 26 }; 27 28 gpio_leds_som: leds { 29 pinctrl-names = "default"; 30 pinctrl-0 = <&pinctrl_gpioleds_som>; 31 compatible = "gpio-leds"; 32 33 phycore-green { 34 gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; 35 linux,default-trigger = "heartbeat"; 36 }; 37 }; 38 }; 39 40 &fec1 { 41 pinctrl-names = "default"; 42 pinctrl-0 = <&pinctrl_enet1>; 43 phy-mode = "rmii"; 44 phy-handle = <ðphy1>; 45 status = "disabled"; 46 47 mdio: mdio { 48 #address-cells = <1>; 49 #size-cells = <0>; 50 51 ethphy1: ethernet-phy@1 { 52 reg = <1>; 53 interrupt-parent = <&gpio1>; 54 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 55 micrel,led-mode = <1>; 56 clocks = <&clks IMX6UL_CLK_ENET_REF>; 57 clock-names = "rmii-ref"; 58 status = "disabled"; 59 }; 60 }; 61 }; 62 63 &gpmi { 64 pinctrl-names = "default"; 65 pinctrl-0 = <&pinctrl_gpmi_nand>; 66 nand-on-flash-bbt; 67 status = "disabled"; 68 }; 69 70 &i2c1 { 71 pinctrl-names = "default", "gpio"; 72 pinctrl-0 = <&pinctrl_i2c1>; 73 pinctrl-1 = <&pinctrl_i2c1_gpio>; 74 scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 75 sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 76 clock-frequency = <100000>; 77 status = "okay"; 78 79 eeprom@52 { 80 compatible = "catalyst,24c32", "atmel,24c32"; 81 pagesize = <32>; 82 reg = <0x52>; 83 }; 84 }; 85 86 &snvs_poweroff { 87 status = "okay"; 88 }; 89 90 &uart1 { 91 pinctrl-names = "default"; 92 pinctrl-0 = <&pinctrl_uart1>; 93 status = "okay"; 94 }; 95 96 &usdhc2 { 97 pinctrl-names = "default"; 98 pinctrl-0 = <&pinctrl_usdhc2>; 99 bus-width = <8>; 100 no-1-8-v; 101 non-removable; 102 status = "disabled"; 103 }; 104 105 &iomuxc { 106 pinctrl_enet1: enet1grp { 107 fsl,pins = < 108 MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x10010 109 MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x10010 110 MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 111 MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 112 MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 113 MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 114 MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b010 115 MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b010 116 MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b010 117 MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b010 118 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x17059 119 >; 120 }; 121 122 pinctrl_gpioleds_som: gpioledssomgrp { 123 fsl,pins = <MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0>; 124 }; 125 126 pinctrl_gpmi_nand: gpminandgrp { 127 fsl,pins = < 128 MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 129 MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 130 MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 131 MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 132 MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 133 MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 134 MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 135 MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 136 MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 137 MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 138 MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 139 MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 140 MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 141 MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 142 MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 143 >; 144 }; 145 146 pinctrl_i2c1: i2cgrp { 147 fsl,pins = < 148 MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 149 MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 150 >; 151 }; 152 153 pinctrl_i2c1_gpio: i2cgpiogrp { 154 fsl,pins = < 155 MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 156 MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 157 >; 158 }; 159 160 pinctrl_uart1: uart1grp { 161 fsl,pins = < 162 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 163 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 164 >; 165 }; 166 167 pinctrl_usdhc2: usdhc2grp { 168 fsl,pins = < 169 MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 170 MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 171 MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 172 MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 173 MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 174 MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 175 MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 176 MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 177 MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 178 MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 179 >; 180 }; 181 182 };
Cache object: f8837ae2571d4018c83c5ef21a4769d6
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]