kirkwood-c200-v1.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-or-later
    2 /*
    3  * Ctera C200 V1 Board Description
    4  * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
    5  */
    6 
    7 /dts-v1/;
    8 
    9 #include "kirkwood.dtsi"
   10 #include "kirkwood-6281.dtsi"
   11 #include <dt-bindings/leds/common.h>
   12 
   13 / {
   14         model = "Ctera C200 V1";
   15         compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   16 
   17         chosen {
   18                 bootargs = "console=ttyS0,115200";
   19                 stdout-path = &uart0;
   20         };
   21 
   22         memory@0 {
   23                 device_type = "memory";
   24                 reg = <0x00000000 0x20000000>;
   25         };
   26 
   27         keys {
   28                 compatible = "gpio-keys";
   29                 pinctrl-0 = <&pmx_buttons>;
   30                 pinctrl-names = "default";
   31 
   32                 power {
   33                         label = "Power Button";
   34                         linux,code = <KEY_POWER>;
   35                         gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
   36                 };
   37 
   38                 reset {
   39                         label = "Reset Button";
   40                         linux,code = <KEY_RESTART>;
   41                         gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
   42                 };
   43 
   44                 usb1 {
   45                         label = "USB1 Button";
   46                         linux,code = <BTN_0>;
   47                         gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
   48                 };
   49 
   50                 usb2 {
   51                         label = "USB2 Button";
   52                         linux,code = <BTN_1>;
   53                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
   54                 };
   55         };
   56 
   57         gpio-poweroff {
   58                 compatible = "gpio-poweroff";
   59                 pinctrl-0 = <&pmx_poweroff>;
   60                 pinctrl-names = "default";
   61                 gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
   62         };
   63 
   64         leds {
   65                 compatible = "gpio-leds";
   66                 pinctrl-0 = <&pmx_leds>;
   67                 pinctrl-names = "default";
   68 
   69                 led-0 {
   70                         function = LED_FUNCTION_DISK;
   71                         function-enumerator = <2>;
   72                         color = <LED_COLOR_ID_RED>;
   73                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
   74                 };
   75 
   76                 led-1 {
   77                         function = LED_FUNCTION_DISK;
   78                         function-enumerator = <1>;
   79                         color = <LED_COLOR_ID_GREEN>;
   80                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
   81                 };
   82 
   83                 led-2 {
   84                         function = LED_FUNCTION_DISK;
   85                         function-enumerator = <2>;
   86                         color = <LED_COLOR_ID_GREEN>;
   87                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
   88                 };
   89 
   90                 led-3 {
   91                         function = LED_FUNCTION_DISK;
   92                         function-enumerator = <1>;
   93                         color = <LED_COLOR_ID_RED>;
   94                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
   95                 };
   96 
   97                 led-4 {
   98                         function = LED_FUNCTION_STATUS;
   99                         color = <LED_COLOR_ID_RED>;
  100                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  101                 };
  102 
  103                 led-5 {
  104                         function = LED_FUNCTION_STATUS;
  105                         color = <LED_COLOR_ID_GREEN>;
  106                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  107                 };
  108 
  109                 led-6 {
  110                         function = LED_FUNCTION_INDICATOR;
  111                         color = <LED_COLOR_ID_BLUE>;
  112                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  113                 };
  114 
  115                 led-7 {
  116                         function = LED_FUNCTION_DISK_ERR;
  117                         color = <LED_COLOR_ID_RED>;
  118                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  119                 };
  120 
  121                 led-8 {
  122                         function = LED_FUNCTION_DISK_ERR;
  123                         color = <LED_COLOR_ID_GREEN>;
  124                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  125                 };
  126 
  127                 led-9 {
  128                         function = LED_FUNCTION_USB;
  129                         function-enumerator = <1>;
  130                         color = <LED_COLOR_ID_RED>;
  131                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  132                 };
  133 
  134                 led-10 {
  135                         function = LED_FUNCTION_USB;
  136                         function-enumerator = <1>;
  137                         color = <LED_COLOR_ID_GREEN>;
  138                         gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
  139                         linux,default-trigger = "usbport";
  140                         trigger-sources = <&hub_port2>;
  141                 };
  142 
  143                 led-11 {
  144                         function = LED_FUNCTION_USB;
  145                         function-enumerator = <2>;
  146                         color = <LED_COLOR_ID_RED>;
  147                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  148                 };
  149 
  150                 led-12 {
  151                         function = LED_FUNCTION_USB;
  152                         function-enumerator = <2>;
  153                         color = <LED_COLOR_ID_GREEN>;
  154                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  155                         linux,default-trigger = "usbport";
  156                         trigger-sources = <&hub_port1>;
  157                 };
  158         };
  159 };
  160 
  161 &eth0 {
  162         status = "okay";
  163 };
  164 
  165 &eth0port {
  166         phy-handle = <&ethphy9>;
  167 };
  168 
  169 &i2c0 {
  170         status = "okay";
  171 
  172         rtc@30 {
  173                 compatible = "s35390a";
  174                 reg = <0x30>;
  175         };
  176 
  177         lm63@4c {
  178                 compatible = "national,lm63";
  179                 reg = <0x4c>;
  180         };
  181 };
  182 
  183 &mdio {
  184         status = "okay";
  185 
  186         ethphy9: ethernet-phy@9 {
  187                 reg = <9>;
  188         };
  189 };
  190 
  191 &nand {
  192         status = "okay";
  193         chip-delay = <40>;
  194 
  195         partition@0 {
  196                 label = "uboot";
  197                 reg = <0x0000000 0x200000>;
  198         };
  199 
  200         partition@200000 {
  201                 label = "certificate";
  202                 reg = <0x0200000 0x100000>;
  203         };
  204 
  205         partition@300000 {
  206                 label = "preset_cfg";
  207                 reg = <0x0300000 0x100000>;
  208         };
  209 
  210         partition@400000 {
  211                 label = "dev_params";
  212                 reg = <0x0400000 0x100000>;
  213         };
  214 
  215         partition@500000 {
  216                 label = "active_bank";
  217                 reg = <0x0500000 0x0100000>;
  218         };
  219 
  220         partition@600000 {
  221                 label = "magic";
  222                 reg = <0x0600000 0x0100000>;
  223         };
  224 
  225         partition@700000 {
  226                 label = "bank1";
  227                 reg = <0x0700000 0x2800000>;
  228         };
  229 
  230         partition@2f00000 {
  231                 label = "bank2";
  232                 reg = <0x2f00000 0x2800000>;
  233         };
  234 
  235         /* 0x5700000-0x5a00000 undefined in vendor firmware */
  236 
  237         partition@5a00000 {
  238                 label = "reserved";
  239                 reg = <0x5a00000 0x2000000>;
  240         };
  241 
  242         partition@7a00000 {
  243                 label = "rootfs";
  244                 reg = <0x7a00000 0x8600000>;
  245         };
  246 };
  247 
  248 &pinctrl {
  249         /* Buzzer gpios are connected to two pins of buzzer.
  250          * This buzzer require a modulated signal from gpio.
  251          * Leave it as is due lack of proper driver.
  252          */
  253         pmx_buzzer: pmx-buzzer {
  254                 marvell,pins = "mpp12", "mpp13";
  255                 marvell,function = "gpio";
  256         };
  257 
  258         pmx_leds: pmx-leds {
  259                 marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
  260                                "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
  261                                "mpp45", "mpp46", "mpp47";
  262                 marvell,function = "gpio";
  263         };
  264 
  265         pmx_buttons: pmx-buttons {
  266                 marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
  267                 marvell,function = "gpio";
  268         };
  269 
  270         pmx_poweroff: pmx-poweroff {
  271                 marvell,pins = "mpp34";
  272                 marvell,function = "gpio";
  273         };
  274 };
  275 
  276 &rtc {
  277         status = "disabled";
  278 };
  279 
  280 &sata {
  281         status = "okay";
  282         nr-ports = <2>;
  283 };
  284 
  285 &uart0 {
  286         status = "okay";
  287 };
  288 
  289 &usb0 {
  290         #address-cells = <1>;
  291         #size-cells = <0>;
  292         status = "okay";
  293 
  294         port@1 {
  295                 #address-cells = <1>;
  296                 #size-cells = <0>;
  297                 reg = <1>;
  298                 #trigger-source-cells = <0>;
  299 
  300                 hub_port1: port@1 {
  301                         reg = <1>;
  302                         #trigger-source-cells = <0>;
  303                 };
  304 
  305                 hub_port2: port@2 {
  306                         reg = <2>;
  307                         #trigger-source-cells = <0>;
  308                 };
  309         };
  310 };

Cache object: 695361387bef48678aee707ec98bc4d7

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/kirkwood-c200-v1.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/kirkwood-c200-v1.dts