kirkwood-dir665.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
    4  *
    5  */
    6 
    7 /dts-v1/;
    8 
    9 #include "kirkwood.dtsi"
   10 #include "kirkwood-6281.dtsi"
   11 
   12 / {
   13         model = "D-Link DIR-665";
   14         compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   15 
   16         memory {
   17                 device_type = "memory";
   18                 reg = <0x00000000 0x8000000>; /* 128 MB */
   19         };
   20 
   21         chosen {
   22                 bootargs = "console=ttyS0,115200n8 earlyprintk";
   23                 stdout-path = &uart0;
   24         };
   25 
   26         ocp@f1000000 {
   27                 pinctrl: pin-controller@10000 {
   28                         pinctrl-0 =< &pmx_led_usb
   29                                      &pmx_led_internet_blue
   30                                      &pmx_led_internet_amber
   31                                      &pmx_led_5g &pmx_led_status_blue
   32                                      &pmx_led_wps &pmx_led_status_amber
   33                                      &pmx_led_24g
   34                                      &pmx_btn_restart &pmx_btn_wps>;
   35                         pinctrl-names = "default";
   36 
   37                         pmx_led_usb: pmx-led-usb {
   38                                 marvell,pins = "mpp12";
   39                                 marvell,function = "gpio";
   40                         };
   41                         pmx_led_internet_blue: pmx-led-internet-blue {
   42                                 marvell,pins = "mpp42";
   43                                 marvell,function = "gpio";
   44                         };
   45                         pmx_led_internet_amber: pmx-led-internet-amber {
   46                                 marvell,pins = "mpp43";
   47                                 marvell,function = "gpio";
   48                         };
   49                         pmx_led_5g: pmx-led-5g {
   50                                 marvell,pins = "mpp44";
   51                                 marvell,function = "gpio";
   52                         };
   53                         pmx_led_status_blue: pmx-led-status-blue {
   54                                 marvell,pins = "mpp45";
   55                                 marvell,function = "gpio";
   56                         };
   57                         pmx_led_wps: pmx-led-wps {
   58                                 marvell,pins = "mpp47";
   59                                 marvell,function = "gpio";
   60                         };
   61                         pmx_led_status_amber: pmx-led-status-amber {
   62                                 marvell,pins = "mpp48";
   63                                 marvell,function = "gpio";
   64                         };
   65                         pmx_led_24g: pmx-led-24g {
   66                                 marvell,pins = "mpp49";
   67                                 marvell,function = "gpio";
   68                         };
   69                         pmx_btn_restart: pmx-btn-restart {
   70                                 marvell,pins = "mpp28";
   71                                 marvell,function = "gpio";
   72                         };
   73                         pmx_btn_wps: pmx-btn-wps {
   74                                 marvell,pins = "mpp46";
   75                                 marvell,function = "gpio";
   76                         };
   77                 };
   78 
   79                 spi@10600 {
   80                         status = "okay";
   81                         flash@0 {
   82                                 #address-cells = <1>;
   83                                 #size-cells = <1>;
   84                                 compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
   85                                 spi-max-frequency = <50000000>;
   86                                 reg = <0>;
   87 
   88                                 partition@0 {
   89                                         label = "uboot";
   90                                         reg = <0x0 0x30000>;
   91                                         read-only;
   92                                 };
   93 
   94                                 partition@30000 {
   95                                         label = "nvram";
   96                                         reg = <0x30000 0x10000>;
   97                                         read-only;
   98                                 };
   99 
  100                                 partition@40000 {
  101                                         label = "kernel";
  102                                         reg = <0x40000 0x180000>;
  103                                 };
  104 
  105                                 partition@1c0000 {
  106                                         label = "rootfs";
  107                                         reg = <0x1c0000 0xe00000>;
  108                                 };
  109 
  110                                 cal_data: partition@fc0000 {
  111                                         label = "cal_data";
  112                                         reg = <0xfc0000 0x10000>;
  113                                         read-only;
  114                                 };
  115 
  116                                 partition@fd0000 {
  117                                         label = "lang_pack";
  118                                         reg = <0xfd0000 0x30000>;
  119                                         read-only;
  120                                 };
  121                         };
  122                 };
  123 
  124                 serial@12000 {
  125                         status = "okay";
  126                 };
  127 
  128                 i2c@11000 {
  129                         status = "okay";
  130                 };
  131 
  132                 ehci@50000 {
  133                         status = "okay";
  134                 };
  135         };
  136 
  137         gpio-leds {
  138                 compatible = "gpio-leds";
  139 
  140                 blue-usb {
  141                         label = "dir665:blue:usb";
  142                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  143                 };
  144                 blue-internet {
  145                         /* Can only be turned on if the Internet
  146                          * Ethernet port has Link
  147                          */
  148                         label = "dir665:blue:internet";
  149                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  150                 };
  151                 amber-internet {
  152                         label = "dir665:amber:internet";
  153                         gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
  154                 };
  155                 blue-wifi5g {
  156                         label = "dir665:blue:5g";
  157                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  158                 };
  159                 blue-status {
  160                         label = "dir665:blue:status";
  161                         gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
  162                 };
  163                 blue-wps {
  164                         label = "dir665:blue:wps";
  165                         gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
  166                 };
  167                 amber-status {
  168                         label = "dir665:amber:status";
  169                         gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
  170                 };
  171                 blue-24g {
  172                         label = "dir665:blue:24g";
  173                         gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
  174                 };
  175         };
  176 
  177         gpio-keys {
  178                 compatible = "gpio-keys";
  179                 #address-cells = <1>;
  180                 #size-cells = <0>;
  181 
  182                 reset {
  183                         label = "reset";
  184                         linux,code = <KEY_RESTART>;
  185                         gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
  186                 };
  187                 wps {
  188                         label = "wps";
  189                         linux,code = <KEY_WPS_BUTTON>;
  190                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  191                 };
  192         };
  193 };
  194 
  195 &mdio {
  196         status = "okay";
  197 
  198         switch@0 {
  199                 compatible = "marvell,mv88e6085";
  200                 #address-cells = <1>;
  201                 #size-cells = <0>;
  202                 reg = <0>;
  203 
  204                 ports {
  205                         #address-cells = <1>;
  206                         #size-cells = <0>;
  207 
  208                         port@0 {
  209                                 reg = <0>;
  210                                 label = "lan4";
  211                         };
  212 
  213                         port@1 {
  214                                reg = <1>;
  215                                label = "lan3";
  216                         };
  217 
  218                         port@2 {
  219                                reg = <2>;
  220                                label = "lan2";
  221                         };
  222 
  223                         port@3 {
  224                                reg = <3>;
  225                                label = "lan1";
  226                         };
  227 
  228                         port@4 {
  229                                 reg = <4>;
  230                                 label = "wan";
  231                         };
  232 
  233                         port@6 {
  234                                 reg = <6>;
  235                                 label = "cpu";
  236                                 ethernet = <&eth0port>;
  237                                 fixed-link {
  238                                         speed = <1000>;
  239                                         full-duplex;
  240                                 };
  241                         };
  242                 };
  243         };
  244 };
  245 
  246 /* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
  247  * fixed speed and duplex. */
  248 &eth0 {
  249         status = "okay";
  250 
  251         ethernet0-port@0 {
  252                 speed = <1000>;
  253                 duplex = <1>;
  254         };
  255 };
  256 
  257 /* eth1 is connected to the switch as well. However DSA only supports a
  258  * single CPU port. So leave this port disabled to avoid confusion. */
  259 
  260 &eth1 {
  261         status = "disabled";
  262 };
  263 
  264 /* There is no battery on the boards, so the RTC does not keep time
  265  * when there is no power, making it useless. */
  266 &rtc {
  267         status = "disabled";
  268 };
  269 
  270 &pciec {
  271         status = "okay";
  272 };
  273 
  274 &pcie0 {
  275         status = "okay";
  276 };

Cache object: 11439c788acb07a5bb8f3b52f44d3b21

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/kirkwood-dir665.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/kirkwood-dir665.dts