kirkwood-nsa320.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0+
    2 /* Device tree file for the Zyxel NSA 320 NAS box.
    3  *
    4  * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
    5  *
    6  *
    7  * Based upon the board setup file created by Peter Schildmann */
    8 
    9 /dts-v1/;
   10 
   11 #include "kirkwood-nsa3x0-common.dtsi"
   12 
   13 / {
   14         model = "Zyxel NSA320";
   15         compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   16 
   17         memory {
   18                 device_type = "memory";
   19                 reg = <0x00000000 0x20000000>;
   20         };
   21 
   22         chosen {
   23                 bootargs = "console=ttyS0,115200";
   24                 stdout-path = &uart0;
   25         };
   26 
   27         ocp@f1000000 {
   28                 pinctrl: pin-controller@10000 {
   29                         pinctrl-names = "default";
   30 
   31                         /* SATA Activity and Present pins are not connected */
   32                         pmx_sata0: pmx-sata0 {
   33                                 marvell,pins ;
   34                                 marvell,function = "sata0";
   35                         };
   36 
   37                         pmx_sata1: pmx-sata1 {
   38                                 marvell,pins ;
   39                                 marvell,function = "sata1";
   40                         };
   41 
   42                         pmx_led_hdd2_green: pmx-led-hdd2-green {
   43                                 marvell,pins = "mpp12";
   44                                 marvell,function = "gpio";
   45                         };
   46 
   47                         pmx_led_hdd2_red: pmx-led-hdd2-red {
   48                                 marvell,pins = "mpp13";
   49                                 marvell,function = "gpio";
   50                         };
   51 
   52                         pmx_mcu_data: pmx-mcu-data {
   53                                 marvell,pins = "mpp14";
   54                                 marvell,function = "gpio";
   55                         };
   56 
   57                         pmx_led_usb_green: pmx-led-usb-green {
   58                                 marvell,pins = "mpp15";
   59                                 marvell,function = "gpio";
   60                         };
   61 
   62                         pmx_mcu_clk: pmx-mcu-clk {
   63                                 marvell,pins = "mpp16";
   64                                 marvell,function = "gpio";
   65                         };
   66 
   67                         pmx_mcu_act: pmx-mcu-act {
   68                                 marvell,pins = "mpp17";
   69                                 marvell,function = "gpio";
   70                         };
   71 
   72                         pmx_led_sys_green: pmx-led-sys-green {
   73                                 marvell,pins = "mpp28";
   74                                 marvell,function = "gpio";
   75                         };
   76 
   77                         pmx_led_sys_orange: pmx-led-sys-orange {
   78                                 marvell,pins = "mpp29";
   79                                 marvell,function = "gpio";
   80                         };
   81 
   82                         pmx_led_hdd1_green: pmx-led-hdd1-green {
   83                                 marvell,pins = "mpp41";
   84                                 marvell,function = "gpio";
   85                         };
   86 
   87                         pmx_led_hdd1_red: pmx-led-hdd1-red {
   88                                 marvell,pins = "mpp42";
   89                                 marvell,function = "gpio";
   90                         };
   91 
   92                         pmx_htp: pmx-htp {
   93                                 marvell,pins = "mpp43";
   94                                 marvell,function = "gpio";
   95                         };
   96 
   97                         /* Buzzer needs to be switched at around 1kHz so is
   98                            not compatible with the gpio-beeper driver. */
   99                         pmx_buzzer: pmx-buzzer {
  100                                 marvell,pins = "mpp44";
  101                                 marvell,function = "gpio";
  102                         };
  103 
  104                         pmx_vid_b1: pmx-vid-b1 {
  105                                 marvell,pins = "mpp45";
  106                                 marvell,function = "gpio";
  107                         };
  108 
  109                         pmx_power_resume_data: pmx-power-resume-data {
  110                                 marvell,pins = "mpp47";
  111                                 marvell,function = "gpio";
  112                         };
  113 
  114                         pmx_power_resume_clk: pmx-power-resume-clk {
  115                                 marvell,pins = "mpp49";
  116                                 marvell,function = "gpio";
  117                         };
  118                 };
  119 
  120                 i2c@11000 {
  121                         status = "okay";
  122 
  123                         pcf8563: pcf8563@51 {
  124                                 compatible = "nxp,pcf8563";
  125                                 reg = <0x51>;
  126                         };
  127                 };
  128         };
  129 
  130         regulators {
  131                 usb0_power: regulator@1 {
  132                         enable-active-high;
  133                 };
  134         };
  135 
  136         gpio-leds {
  137                 compatible = "gpio-leds";
  138                 pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
  139                              &pmx_led_usb_green
  140                              &pmx_led_sys_green &pmx_led_sys_orange
  141                              &pmx_led_copy_green &pmx_led_copy_red
  142                              &pmx_led_hdd1_green &pmx_led_hdd1_red>;
  143                 pinctrl-names = "default";
  144 
  145                 green-sys {
  146                         label = "nsa320:green:sys";
  147                         gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
  148                 };
  149                 orange-sys {
  150                         label = "nsa320:orange:sys";
  151                         gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
  152                 };
  153                 green-hdd1 {
  154                         label = "nsa320:green:hdd1";
  155                         gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
  156                 };
  157                 red-hdd1 {
  158                         label = "nsa320:red:hdd1";
  159                         gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
  160                 };
  161                 green-hdd2 {
  162                         label = "nsa320:green:hdd2";
  163                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  164                 };
  165                 red-hdd2 {
  166                         label = "nsa320:red:hdd2";
  167                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  168                 };
  169                 green-usb {
  170                         label = "nsa320:green:usb";
  171                         gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
  172                 };
  173                 green-copy {
  174                         label = "nsa320:green:copy";
  175                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  176                 };
  177                 red-copy {
  178                         label = "nsa320:red:copy";
  179                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
  180                 };
  181         };
  182 
  183         hwmon {
  184                 compatible = "zyxel,nsa320-mcu";
  185                 pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
  186                 pinctrl-names = "default";
  187 
  188                 data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
  189                 clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
  190                 act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  191         };
  192 
  193         /* The following pins are currently not assigned to a driver,
  194            some of them should be configured as inputs.
  195         pinctrl-0 = <&pmx_htp &pmx_vid_b1
  196                      &pmx_power_resume_data &pmx_power_resume_clk>; */
  197 };
  198 
  199 &mdio {
  200         status = "okay";
  201         ethphy0: ethernet-phy@1 {
  202                 reg = <1>;
  203         };
  204 };
  205 
  206 &eth0 {
  207         status = "okay";
  208         ethernet0-port@0 {
  209                 phy-handle = <&ethphy0>;
  210         };
  211 };
  212 
  213 &pciec {
  214         status = "okay";
  215 };
  216 
  217 &pcie0 {
  218         status = "okay";
  219 };

Cache object: e0191634e62154186cbae5fcbc265c77

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/kirkwood-nsa320.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/kirkwood-nsa320.dts