kirkwood-nsa3x0-common.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0
    2 #include "kirkwood.dtsi"
    3 #include "kirkwood-6281.dtsi"
    4 
    5 / {
    6         model = "ZyXEL NSA310";
    7 
    8         ocp@f1000000 {
    9                 pinctrl: pin-controller@10000 {
   10 
   11                         pmx_usb_power: pmx-usb-power {
   12                                 marvell,pins = "mpp21";
   13                                 marvell,function = "gpio";
   14                         };
   15 
   16                         pmx_pwr_off: pmx-pwr-off {
   17                                 marvell,pins = "mpp48";
   18                                 marvell,function = "gpio";
   19                         };
   20 
   21                         pmx_btn_reset: pmx-btn-reset {
   22                                 marvell,pins = "mpp36";
   23                                 marvell,function = "gpio";
   24                         };
   25 
   26                         pmx_btn_copy: pmx-btn-copy {
   27                                 marvell,pins = "mpp37";
   28                                 marvell,function = "gpio";
   29                         };
   30 
   31                         pmx_btn_power: pmx-btn-power {
   32                                 marvell,pins = "mpp46";
   33                                 marvell,function = "gpio";
   34                         };
   35 
   36                         pmx_led_copy_green: pmx-led-copy-green {
   37                                 marvell,pins = "mpp39";
   38                                 marvell,function = "gpio";
   39                         };
   40 
   41                         pmx_led_copy_red: pmx-led-copy-red {
   42                                 marvell,pins = "mpp40";
   43                                 marvell,function = "gpio";
   44                         };
   45                 };
   46 
   47                 serial@12000 {
   48                         status = "okay";
   49                 };
   50 
   51                 sata@80000 {
   52                         status = "okay";
   53                         nr-ports = <2>;
   54                 };
   55         };
   56 
   57         gpio_poweroff {
   58                 compatible = "gpio-poweroff";
   59                 pinctrl-0 = <&pmx_pwr_off>;
   60                 pinctrl-names = "default";
   61                 gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
   62         };
   63 
   64         gpio_keys {
   65                 compatible = "gpio-keys";
   66                 #address-cells = <1>;
   67                 #size-cells = <0>;
   68                 pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
   69                 pinctrl-names = "default";
   70 
   71                 power {
   72                         label = "Power Button";
   73                         linux,code = <KEY_POWER>;
   74                         gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
   75                 };
   76                 copy {
   77                         label = "Copy Button";
   78                         linux,code = <KEY_COPY>;
   79                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
   80                 };
   81                 reset {
   82                         label = "Reset Button";
   83                         linux,code = <KEY_RESTART>;
   84                         gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
   85                 };
   86         };
   87 
   88 
   89         regulators {
   90                 compatible = "simple-bus";
   91                 #address-cells = <1>;
   92                 #size-cells = <0>;
   93                 pinctrl-0 = <&pmx_usb_power>;
   94                 pinctrl-names = "default";
   95 
   96                 usb0_power: regulator@1 {
   97                         compatible = "regulator-fixed";
   98                         reg = <1>;
   99                         regulator-name = "USB Power";
  100                         regulator-min-microvolt = <5000000>;
  101                         regulator-max-microvolt = <5000000>;
  102                         regulator-always-on;
  103                         regulator-boot-on;
  104                         gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
  105                 };
  106         };
  107 };
  108 
  109 &nand {
  110         status = "okay";
  111         chip-delay = <35>;
  112 
  113         partition@0 {
  114                 label = "uboot";
  115                 reg = <0x0000000 0x0100000>;
  116                 read-only;
  117         };
  118         partition@100000 {
  119                 label = "uboot_env";
  120                 reg = <0x0100000 0x0080000>;
  121         };
  122         partition@180000 {
  123                 label = "key_store";
  124                 reg = <0x0180000 0x0080000>;
  125         };
  126         partition@200000 {
  127                 label = "info";
  128                 reg = <0x0200000 0x0080000>;
  129         };
  130         partition@280000 {
  131                 label = "etc";
  132                 reg = <0x0280000 0x0a00000>;
  133         };
  134         partition@c80000 {
  135                 label = "kernel_1";
  136                 reg = <0x0c80000 0x0a00000>;
  137         };
  138         partition@1680000 {
  139                 label = "rootfs1";
  140                 reg = <0x1680000 0x2fc0000>;
  141         };
  142         partition@4640000 {
  143                 label = "kernel_2";
  144                 reg = <0x4640000 0x0a00000>;
  145         };
  146         partition@5040000 {
  147                 label = "rootfs2";
  148                 reg = <0x5040000 0x2fc0000>;
  149         };
  150 };
  151 
  152 &pciec {
  153         status = "okay";
  154 };
  155 
  156 &pcie0 {
  157         status = "okay";
  158 };

Cache object: 51acc718632bfa78b7bdde56737f9131

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/kirkwood-nsa3x0-common.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/kirkwood-nsa3x0-common.dtsi