ls1021a-moxa-uc-8410a.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-only
    2 /*
    3  * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/
    4  *
    5  * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com>
    6  *         Jimmy Chen (陳永達)    <jimmy.chen@moxa.com>
    7  *         SZ Lin (林上智)        <sz.lin@moxa.com>
    8  */
    9 
   10 /dts-v1/;
   11 
   12 #include <dt-bindings/gpio/gpio.h>
   13 #include <dt-bindings/input/input.h>
   14 #include "ls1021a.dtsi"
   15 
   16 / {
   17         model = "Moxa UC-8410A";
   18         compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a";
   19 
   20         aliases {
   21                 enet0_rgmii_phy = &rgmii_phy0;
   22                 enet1_rgmii_phy = &rgmii_phy1;
   23                 enet2_rgmii_phy = &rgmii_phy2;
   24         };
   25 
   26         sys_mclk: clock-mclk {
   27                 compatible = "fixed-clock";
   28                 #clock-cells = <0>;
   29                 clock-frequency = <24576000>;
   30         };
   31 
   32         reg_3p3v: regulator-3p3v {
   33                   compatible = "regulator-fixed";
   34                   regulator-name = "3P3V";
   35                   regulator-min-microvolt = <3300000>;
   36                   regulator-max-microvolt = <3300000>;
   37                   regulator-always-on;
   38         };
   39 
   40         leds {
   41                 compatible = "gpio-leds";
   42 
   43                 cel-pwr {
   44                         label = "UC8410A:CEL-PWR";
   45                         gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
   46                         default-state = "off";
   47                 };
   48 
   49                 cel-reset {
   50                         label = "UC8410A:CEL-RESET";
   51                         gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
   52                         default-state = "off";
   53                 };
   54 
   55                 str-led {
   56                         label = "UC8410A:RED:PROG";
   57                         gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
   58                         linux,default-trigger = "mmc0";
   59                 };
   60 
   61                 sw-ready {
   62                         label = "UC8410A:GREEN:SWRDY";
   63                         gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
   64                         default-state = "on";
   65                 };
   66 
   67                 beeper {
   68                         label = "UC8410A:BEEP";
   69                         gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
   70                         default-state = "off";
   71                 };
   72 
   73                 prog-led0 {
   74                         label = "UC8410A:GREEN:PROG2";
   75                         gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
   76                         default-state = "off";
   77                 };
   78 
   79                 prog-led1 {
   80                         label = "UC8410A:GREEN:PROG1";
   81                         gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
   82                         default-state = "off";
   83                 };
   84 
   85                 prog-led2 {
   86                         label = "UC8410A:GREEN:PROG0";
   87                         gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
   88                         default-state = "off";
   89                 };
   90 
   91                 wifi-signal0 {
   92                         label = "UC8410A:GREEN:CEL2";
   93                         gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
   94                         default-state = "off";
   95                 };
   96 
   97                 wifi-signal1 {
   98                         label = "UC8410A:GREEN:CEL1";
   99                         gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
  100                         default-state = "off";
  101                 };
  102 
  103                 wifi-signal2 {
  104                         label = "UC8410A:GREEN:CEL0";
  105                         gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
  106                         default-state = "off";
  107                 };
  108 
  109                 cpu-diag-red {
  110                         label = "UC8410A:RED:DIA";
  111                         gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
  112                         default-state = "off";
  113                 };
  114 
  115                 cpu-diag-green {
  116                         label = "UC8410A:GREEN:DIA";
  117                         gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
  118                         default-state = "off";
  119                 };
  120 
  121                 cpu-diag-yellow {
  122                         label = "UC8410A:YELLOW:DIA";
  123                         gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
  124                         default-state = "off";
  125                 };
  126         };
  127 
  128         gpio-keys {
  129                 compatible = "gpio-keys";
  130 
  131                 pushbtn-key {
  132                         label = "push button key";
  133                         gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
  134                         linux,code = <BTN_MISC>;
  135                         default-state = "on";
  136                 };
  137         };
  138 };
  139 
  140 &enet0 {
  141         phy-handle = <&rgmii_phy0>;
  142         phy-connection-type = "rgmii-id";
  143         status = "okay";
  144 };
  145 
  146 &enet1 {
  147         phy-handle = <&rgmii_phy1>;
  148         phy-connection-type = "rgmii-id";
  149         status = "okay";
  150 };
  151 
  152 &enet2 {
  153         phy-handle = <&rgmii_phy2>;
  154         phy-connection-type = "rgmii-id";
  155         status = "okay";
  156 };
  157 
  158 &i2c0 {
  159         clock-frequency = <100000>;
  160         status = "okay";
  161 
  162         tpm@20 {
  163                 compatible = "infineon,slb9635tt";
  164                 reg = <0x20>;
  165         };
  166 
  167         rtc@68 {
  168                 compatible = "dallas,ds1374";
  169                 reg = <0x68>;
  170         };
  171 };
  172 
  173 &lpuart0 {
  174         status = "okay";
  175 };
  176 
  177 &mdio0 {
  178         rgmii_phy0: ethernet-phy@0 {
  179                 compatible = "marvell,88e1118";
  180                 reg = <0x0>;
  181                 marvell,reg-init =
  182                         <3 0x11 0 0x4415>, /* Reg 3,17 */
  183                         <3 0x10 0 0x77>; /* Reg 3,16 */
  184         };
  185 
  186         rgmii_phy1: ethernet-phy@1 {
  187                 compatible = "marvell,88e1118";
  188                 reg = <0x1>;
  189                 marvell,reg-init =
  190                         <3 0x11 0 0x4415>, /* Reg 3,17 */
  191                         <3 0x10 0 0x77>; /* Reg 3,16 */
  192         };
  193 
  194         rgmii_phy2: ethernet-phy@2 {
  195                 compatible = "marvell,88e1118";
  196                 reg = <0x2>;
  197                 marvell,reg-init =
  198                         <3 0x11 0 0x4415>, /* Reg 3,17 */
  199                         <3 0x10 0 0x77>; /* Reg 3,16 */
  200         };
  201 };
  202 
  203 &qspi {
  204         status = "okay";
  205 
  206         flash: flash@0 {
  207                 compatible = "spansion,s25fl064l", "spansion,s25fl164k";
  208                 #address-cells = <1>;
  209                 #size-cells = <1>;
  210                 spi-max-frequency = <20000000>;
  211                 spi-rx-bus-width = <4>;
  212                 spi-tx-bus-width = <4>;
  213                 reg = <0>;
  214 
  215                 partitions@0 {
  216                         label = "U-Boot";
  217                         reg = <0x0 0x180000>;
  218                 };
  219 
  220                 partitions@180000 {
  221                         label = "U-Boot Env";
  222                         reg = <0x180000 0x680000>;
  223                 };
  224         };
  225 };
  226 
  227 &sata {
  228         status = "okay";
  229 };
  230 
  231 &uart0 {
  232         status = "okay";
  233 };
  234 
  235 &uart1 {
  236         status = "okay";
  237 };

Cache object: 87d16380e62d77603a930a5bb8998ced

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/ls1021a-moxa-uc-8410a.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/ls1021a-moxa-uc-8410a.dts