Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/motorola-cpcap-mapphone.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Common CPCAP configuration used on Motorola phones 4 */ 5 6 &mcspi1 { 7 cpcap: pmic@0 { 8 compatible = "motorola,cpcap", "st,6556002"; 9 reg = <0>; /* cs0 */ 10 interrupt-parent = <&gpio1>; 11 interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; 12 interrupt-controller; 13 #interrupt-cells = <2>; 14 #address-cells = <1>; 15 #size-cells = <0>; 16 spi-max-frequency = <9600000>; 17 spi-cs-high; 18 spi-cpol; 19 spi-cpha; 20 21 cpcap_adc: adc { 22 compatible = "motorola,mapphone-cpcap-adc"; 23 interrupts-extended = <&cpcap 8 0>; 24 interrupt-names = "adcdone"; 25 #io-channel-cells = <1>; 26 }; 27 28 cpcap_battery: battery { 29 compatible = "motorola,cpcap-battery"; 30 interrupts-extended = 31 <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>, 32 <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>; 33 interrupt-names = 34 "eol", "lowbph", "lowbpl", 35 "chrgcurr1", "battdetb", "cccal"; 36 io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>, 37 <&cpcap_adc 5>, <&cpcap_adc 6>; 38 io-channel-names = "battdetb", "battp", 39 "chg_isense", "batti"; 40 power-supplies = <&cpcap_charger>; 41 }; 42 43 cpcap_charger: charger { 44 compatible = "motorola,mapphone-cpcap-charger"; 45 interrupts-extended = 46 <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, 47 <&cpcap 28 0>, <&cpcap 22 0>, <&cpcap 21 0>, 48 <&cpcap 20 0>, <&cpcap 19 0>, <&cpcap 54 0>; 49 interrupt-names = 50 "chrg_det", "rvrs_chrg", "chrg_se1b", 51 "se0conn", "rvrs_mode", "chrgcurr2", 52 "chrgcurr1", "vbusvld", "battdetb"; 53 mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>, 54 <&gpio3 23 GPIO_ACTIVE_LOW>; 55 io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>, 56 <&cpcap_adc 2>, <&cpcap_adc 5>, 57 <&cpcap_adc 6>; 58 io-channel-names = "battdetb", "battp", 59 "vbus", "chg_isense", 60 "batti"; 61 }; 62 63 cpcap_regulator: regulator { 64 compatible = "motorola,mapphone-cpcap-regulator"; 65 66 cpcap_regulators: regulators { 67 }; 68 }; 69 70 cpcap_audio: audio-codec { 71 #sound-dai-cells = <1>; 72 73 port@0 { 74 cpcap_audio_codec0: endpoint { 75 }; 76 }; 77 port@1 { 78 cpcap_audio_codec1: endpoint { 79 }; 80 }; 81 }; 82 83 cpcap_rtc: rtc { 84 compatible = "motorola,cpcap-rtc"; 85 86 interrupt-parent = <&cpcap>; 87 interrupts = <39 IRQ_TYPE_NONE>, <26 IRQ_TYPE_NONE>; 88 }; 89 90 power_button: button { 91 compatible = "motorola,cpcap-pwrbutton"; 92 93 interrupts = <23 IRQ_TYPE_NONE>; 94 }; 95 96 cpcap_usb2_phy: phy { 97 compatible = "motorola,mapphone-cpcap-usb-phy"; 98 pinctrl-0 = <&usb_gpio_mux_sel1>, <&usb_gpio_mux_sel2>; 99 pinctrl-1 = <&usb_ulpi_pins>; 100 pinctrl-2 = <&usb_utmi_pins>; 101 pinctrl-3 = <&uart3_pins>; 102 pinctrl-names = "default", "ulpi", "utmi", "uart"; 103 #phy-cells = <0>; 104 interrupts-extended = 105 <&cpcap 15 0>, <&cpcap 14 0>, <&cpcap 28 0>, 106 <&cpcap 19 0>, <&cpcap 18 0>, <&cpcap 17 0>, 107 <&cpcap 16 0>, <&cpcap 49 0>, <&cpcap 48 0>; 108 interrupt-names = 109 "id_ground", "id_float", "se0conn", 110 "vbusvld", "sessvld", "sessend", 111 "se1", "dm", "dp"; 112 mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, 113 <&gpio1 0 GPIO_ACTIVE_HIGH>; 114 io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; 115 io-channel-names = "vbus", "id"; 116 vusb-supply = <&vusb>; 117 }; 118 119 led_red: led-red { 120 compatible = "motorola,cpcap-led-red"; 121 vdd-supply = <&sw5>; 122 label = "status-led:red"; 123 }; 124 125 led_green: led-green { 126 compatible = "motorola,cpcap-led-green"; 127 vdd-supply = <&sw5>; 128 label = "status-led:green"; 129 }; 130 131 led_blue: led-blue { 132 compatible = "motorola,cpcap-led-blue"; 133 vdd-supply = <&sw5>; 134 label = "status-led:blue"; 135 }; 136 137 led_adl: led-adl { 138 compatible = "motorola,cpcap-led-adl"; 139 vdd-supply = <&sw5>; 140 label = "button-backlight"; 141 }; 142 143 led_cp: led-cp { 144 compatible = "motorola,cpcap-led-cp"; 145 vdd-supply = <&sw5>; 146 label = "shift-key-light"; 147 }; 148 }; 149 }; 150 151 &cpcap_regulators { 152 sw5: SW5 { 153 regulator-min-microvolt = <5050000>; 154 regulator-max-microvolt = <5050000>; 155 regulator-enable-ramp-delay = <50000>; 156 regulator-boot-on; 157 }; 158 159 vcam: VCAM { 160 regulator-min-microvolt = <2900000>; 161 regulator-max-microvolt = <2900000>; 162 regulator-enable-ramp-delay = <1000>; 163 }; 164 165 /* Used by DSS and is the "zerov_regulator" trigger for SoC off mode */ 166 vcsi: VCSI { 167 regulator-min-microvolt = <1800000>; 168 regulator-max-microvolt = <1800000>; 169 regulator-enable-ramp-delay = <1000>; 170 regulator-always-on; 171 }; 172 173 vdac: VDAC { 174 regulator-min-microvolt = <1800000>; 175 regulator-max-microvolt = <1800000>; 176 regulator-enable-ramp-delay = <1000>; 177 }; 178 179 vdig: VDIG { 180 regulator-min-microvolt = <1875000>; 181 regulator-max-microvolt = <1875000>; 182 regulator-enable-ramp-delay = <1000>; 183 }; 184 185 vfuse: VFUSE { 186 regulator-min-microvolt = <1500000>; 187 regulator-max-microvolt = <3150000>; 188 regulator-enable-ramp-delay = <1000>; 189 }; 190 191 vhvio: VHVIO { 192 regulator-min-microvolt = <2775000>; 193 regulator-max-microvolt = <2775000>; 194 regulator-enable-ramp-delay = <1000>; 195 regulator-always-on; 196 }; 197 198 /* Used by eMMC at mmc2 */ 199 vsdio: VSDIO { 200 regulator-min-microvolt = <2900000>; 201 regulator-max-microvolt = <2900000>; 202 regulator-enable-ramp-delay = <1000>; 203 }; 204 205 vpll: VPLL { 206 regulator-min-microvolt = <1200000>; 207 regulator-max-microvolt = <1800000>; 208 regulator-enable-ramp-delay = <100>; 209 }; 210 211 vrf1: VRF1 { 212 regulator-min-microvolt = <2775000>; 213 regulator-max-microvolt = <2775000>; 214 regulator-enable-ramp-delay = <1000>; 215 }; 216 217 vrf2: VRF2 { 218 regulator-min-microvolt = <2775000>; 219 regulator-max-microvolt = <2775000>; 220 regulator-enable-ramp-delay = <1000>; 221 }; 222 223 vrfref: VRFREF { 224 regulator-min-microvolt = <2500000>; 225 regulator-max-microvolt = <2775000>; 226 regulator-enable-ramp-delay = <100>; 227 }; 228 229 vwlan1: VWLAN1 { 230 regulator-min-microvolt = <1800000>; 231 regulator-max-microvolt = <1900000>; 232 regulator-enable-ramp-delay = <1000>; 233 }; 234 235 /* Used by micro-SDIO at mmc1 */ 236 vwlan2: VWLAN2 { 237 regulator-min-microvolt = <3000000>; 238 regulator-max-microvolt = <3000000>; 239 regulator-enable-ramp-delay = <1000>; 240 }; 241 242 vsim: VSIM { 243 regulator-min-microvolt = <1800000>; 244 regulator-max-microvolt = <2900000>; 245 regulator-enable-ramp-delay = <1000>; 246 }; 247 248 vsimcard: VSIMCARD { 249 regulator-min-microvolt = <1800000>; 250 regulator-max-microvolt = <2900000>; 251 regulator-enable-ramp-delay = <1000>; 252 }; 253 254 vvib: VVIB { 255 regulator-min-microvolt = <1300000>; 256 regulator-max-microvolt = <3000000>; 257 regulator-enable-ramp-delay = <500>; 258 }; 259 260 vusb: VUSB { 261 regulator-min-microvolt = <3300000>; 262 regulator-max-microvolt = <3300000>; 263 regulator-enable-ramp-delay = <1000>; 264 }; 265 266 vaudio: VAUDIO { 267 regulator-min-microvolt = <2775000>; 268 regulator-max-microvolt = <2775000>; 269 regulator-enable-ramp-delay = <1000>; 270 regulator-initial-mode = <0x00>; /* NORMAL */ 271 }; 272 };
Cache object: 97dfedbdd728cb5106b9e8051b042452
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]