omap3-cm-t3530.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Support for CompuLab CM-T3530
    4  */
    5 /dts-v1/;
    6 
    7 #include "omap34xx.dtsi"
    8 #include "omap3-cm-t3x30.dtsi"
    9 
   10 / {
   11         model = "CompuLab CM-T3530";
   12         compatible = "compulab,omap3-cm-t3530", "ti,omap3430", "ti,omap34xx", "ti,omap3";
   13 
   14         /* Regulator to trigger the reset signal of the Wifi module */
   15         mmc2_sdio_reset: regulator-mmc2-sdio-reset {
   16                 compatible = "regulator-fixed";
   17                 regulator-name = "regulator-mmc2-sdio-reset";
   18                 regulator-min-microvolt = <3300000>;
   19                 regulator-max-microvolt = <3300000>;
   20                 gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
   21                 enable-active-high;
   22         };
   23 };
   24 
   25 &omap3_pmx_core {
   26         mmc2_pins: pinmux_mmc2_pins {
   27                 pinctrl-single,pins = <
   28                         OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_clk.sdmmc2_clk */
   29                         OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_cmd.sdmmc2_cmd */
   30                         OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat0.sdmmc2_dat0 */
   31                         OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat1.sdmmc2_dat1 */
   32                         OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat2.sdmmc2_dat2 */
   33                         OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)         /* sdmmc2_dat3.sdmmc2_dat3 */
   34                         OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)               /* sdmmc2_dat4.sdmmc2_dir_dat0 */
   35                         OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)               /* sdmmc2_dat5.sdmmc2_dir_dat1 */
   36                         OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)               /* sdmmc2_dat6.sdmmc2_dir_cmd */
   37                         OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)                /* sdmmc2_dat7.sdmmc2_clkin */
   38                 >;
   39         };
   40 };
   41 
   42 &mmc2 {
   43         pinctrl-names = "default";
   44         pinctrl-0 = <&mmc2_pins>;
   45         vmmc-supply = <&mmc2_sdio_reset>;
   46         non-removable;
   47         bus-width = <4>;
   48         cap-power-off-card;
   49 };
   50 
   51 &dss {
   52         status = "okay";
   53 
   54         pinctrl-names = "default";
   55         pinctrl-0 = <
   56                 &dss_dpi_pins_common
   57                 &dss_dpi_pins_cm_t35x
   58         >;
   59 };
   60

Cache object: fcefe42653f751df593f94779184e460

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/omap3-cm-t3530.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/omap3-cm-t3530.dts