omap3-igep0030-rev-g.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-only
    2 /*
    3  * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
    4  *
    5  * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
    6  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
    7  */
    8 
    9 #include "omap3-igep0030-common.dtsi"
   10 
   11 / {
   12         model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
   13         compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap36xx", "ti,omap3";
   14 
   15         /* Regulator to trigger the WL_EN signal of the Wifi module */
   16         lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
   17                 compatible = "regulator-fixed";
   18                 regulator-name = "regulator-lbep5clwmc-wlen";
   19                 regulator-min-microvolt = <3300000>;
   20                 regulator-max-microvolt = <3300000>;
   21                 gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;            /* gpio_139 - WL_EN */
   22                 enable-active-high;
   23         };
   24 };
   25 
   26 &omap3_pmx_core {
   27         lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
   28                 pinctrl-single,pins = <
   29                         OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)        /* sdmmc2_dat4.gpio_136 - W_IRQ */
   30                         OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat5.gpio_137 - BT_EN */
   31                         OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat7.gpio_139 - WL_EN */
   32                 >;
   33         };
   34 
   35         leds_pins: pinmux_leds_pins {
   36                 pinctrl-single,pins = <
   37                         OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)       /* i2c2_scl.gpio_168 */
   38                 >;
   39         };
   40 
   41 };
   42 
   43 &i2c2 {
   44         status = "disabled";
   45 };
   46 
   47 &leds {
   48         pinctrl-names = "default";
   49         pinctrl-0 = <&leds_pins &leds_core2_pins>;
   50 
   51         boot {
   52                 label = "omap3:green:boot";
   53                 gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
   54                 default-state = "on";
   55         };
   56 };
   57 
   58 &mmc2 {
   59         pinctrl-names = "default";
   60         pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
   61         vmmc-supply = <&lbep5clwmc_wlen>;
   62         bus-width = <4>;
   63         non-removable;
   64 
   65         #address-cells = <1>;
   66         #size-cells = <0>;
   67         wlcore: wlcore@2 {
   68                 compatible = "ti,wl1835";
   69                 reg = <2>;
   70                 interrupt-parent = <&gpio5>;
   71                 interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
   72         };
   73 };
   74 
   75 &uart2 {
   76         bluetooth {
   77                 compatible = "ti,wl1835-st";
   78                 enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
   79                 max-speed = <300000>;
   80         };
   81 };

Cache object: c7b2574caefc5d311ec369644ca93a9e

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/omap3-igep0030-rev-g.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/omap3-igep0030-rev-g.dts