omap3-ldp.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0-only
    2 /*
    3  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
    4  */
    5 /dts-v1/;
    6 
    7 #include <dt-bindings/input/input.h>
    8 #include "omap34xx.dtsi"
    9 #include "omap-gpmc-smsc911x.dtsi"
   10 
   11 / {
   12         model = "TI OMAP3430 LDP (Zoom1 Labrador)";
   13         compatible = "ti,omap3-ldp", "ti,omap3430", "ti,omap3";
   14 
   15         memory@80000000 {
   16                 device_type = "memory";
   17                 reg = <0x80000000 0x8000000>; /* 128 MB */
   18         };
   19 
   20         cpus {
   21                 cpu@0 {
   22                         cpu0-supply = <&vcc>;
   23                 };
   24         };
   25 
   26         gpio_keys {
   27                 compatible = "gpio-keys";
   28                 pinctrl-names = "default";
   29                 pinctrl-0 = <&gpio_key_pins>;
   30 
   31                 key_enter {
   32                         label = "enter";
   33                         gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
   34                         linux,code = <KEY_ENTER>;
   35                         wakeup-source;
   36                 };
   37 
   38                 key_f1 {
   39                         label = "f1";
   40                         gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
   41                         linux,code = <KEY_F1>;
   42                         wakeup-source;
   43                 };
   44 
   45                 key_f2 {
   46                         label = "f2";
   47                         gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
   48                         linux,code = <KEY_F2>;
   49                         wakeup-source;
   50                 };
   51 
   52                 key_f3 {
   53                         label = "f3";
   54                         gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
   55                         linux,code = <KEY_F3>;
   56                         wakeup-source;
   57                 };
   58 
   59                 key_f4 {
   60                         label = "f4";
   61                         gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
   62                         linux,code = <KEY_F4>;
   63                         wakeup-source;
   64                 };
   65 
   66                 key_left {
   67                         label = "left";
   68                         gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
   69                         linux,code = <KEY_LEFT>;
   70                         wakeup-source;
   71                 };
   72 
   73                 key_right {
   74                         label = "right";
   75                         gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
   76                         linux,code = <KEY_RIGHT>;
   77                         wakeup-source;
   78                 };
   79 
   80                 key_up {
   81                         label = "up";
   82                         gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
   83                         linux,code = <KEY_UP>;
   84                         wakeup-source;
   85                 };
   86 
   87                 key_down {
   88                         label = "down";
   89                         gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
   90                         linux,code = <KEY_DOWN>;
   91                         wakeup-source;
   92                 };
   93         };
   94 };
   95 
   96 &gpmc {
   97         ranges = <0 0 0x30000000 0x1000000>,    /* CS0 space, 16MB */
   98                  <1 0 0x08000000 0x1000000>;    /* CS1 space, 16MB */
   99 
  100         nand@0,0 {
  101                 compatible = "ti,omap2-nand";
  102                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
  103                 interrupt-parent = <&gpmc>;
  104                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
  105                              <1 IRQ_TYPE_NONE>; /* termcount */
  106                 linux,mtd-name = "micron,nand";
  107                 nand-bus-width = <16>;
  108                 gpmc,device-width = <2>;
  109                 ti,nand-ecc-opt = "bch8";
  110 
  111                 gpmc,sync-clk-ps = <0>;
  112                 gpmc,cs-on-ns = <0>;
  113                 gpmc,cs-rd-off-ns = <44>;
  114                 gpmc,cs-wr-off-ns = <44>;
  115                 gpmc,adv-on-ns = <6>;
  116                 gpmc,adv-rd-off-ns = <34>;
  117                 gpmc,adv-wr-off-ns = <44>;
  118                 gpmc,we-off-ns = <40>;
  119                 gpmc,oe-off-ns = <54>;
  120                 gpmc,access-ns = <64>;
  121                 gpmc,rd-cycle-ns = <82>;
  122                 gpmc,wr-cycle-ns = <82>;
  123                 gpmc,wr-access-ns = <40>;
  124                 gpmc,wr-data-mux-bus-ns = <0>;
  125 
  126                 #address-cells = <1>;
  127                 #size-cells = <1>;
  128 
  129                 partition@0 {
  130                         label = "X-Loader";
  131                         reg = <0 0x80000>;
  132                 };
  133                 partition@80000 {
  134                         label = "U-Boot";
  135                         reg = <0x80000 0x140000>;
  136                 };
  137                 partition@1c0000 {
  138                         label = "Environment";
  139                         reg = <0x1c0000 0x40000>;
  140                 };
  141                 partition@200000 {
  142                         label = "Kernel";
  143                         reg = <0x200000 0x1e00000>;
  144                 };
  145                 partition@2000000 {
  146                         label = "Filesystem";
  147                         reg = <0x2000000 0x6000000>;
  148                 };
  149         };
  150 
  151         ethernet@gpmc {
  152                 interrupt-parent = <&gpio5>;
  153                 interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
  154                 reg = <1 0 0xff>;
  155         };
  156 };
  157 
  158 &i2c1 {
  159         clock-frequency = <2600000>;
  160 
  161         twl: twl@48 {
  162                 reg = <0x48>;
  163                 interrupts = <7>; /* SYS_NIRQ cascaded to intc */
  164                 interrupt-parent = <&intc>;
  165 
  166                 twl_power: power {
  167                         compatible = "ti,twl4030-power-idle";
  168                         ti,use_poweroff;
  169                 };
  170         };
  171 };
  172 
  173 #include "twl4030.dtsi"
  174 #include "twl4030_omap3.dtsi"
  175 #include "omap3-panel-sharp-ls037v7dw01.dtsi"
  176 
  177 &backlight0 {
  178         gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
  179 };
  180 
  181 &i2c2 {
  182         clock-frequency = <400000>;
  183 };
  184 
  185 &i2c3 {
  186         clock-frequency = <400000>;
  187 };
  188 
  189 /* tps61130rsa enabled by twl4030 regen */
  190 &lcd_3v3 {
  191         regulator-always-on;
  192 };
  193 
  194 &lcd0 {
  195         enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>; /* lcd INI */
  196         reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;     /* gpio55, lcd RESB */
  197         mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;      /* gpio56, lcd MO */
  198 };
  199 
  200 &mcspi1 {
  201         tsc2046@0 {
  202                 interrupt-parent = <&gpio2>;
  203                 interrupts = <22 0>;            /* gpio54 */
  204                 pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
  205         };
  206 };
  207 
  208 &mmc1 {
  209         /* See 35xx errata 2.1.1.128 in SPRZ278F */
  210         compatible = "ti,omap3-pre-es3-hsmmc";
  211         vmmc-supply = <&vmmc1>;
  212         bus-width = <4>;
  213         pinctrl-names = "default";
  214         pinctrl-0 = <&mmc1_pins>;
  215 };
  216 
  217 &mmc2 {
  218         status = "disabled";
  219 };
  220 
  221 &mmc3 {
  222         status = "disabled";
  223 };
  224 
  225 &omap3_pmx_core {
  226         gpio_key_pins: pinmux_gpio_key_pins {
  227                 pinctrl-single,pins = <
  228                         OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)        /* cam_d2.gpio_101 */
  229                         OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)        /* cam_d3.gpio_102 */
  230                         OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)        /* cam_d4.gpio_103 */
  231                         OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)        /* cam_d5.gpio_104 */
  232                         OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)        /* cam_d6.gpio_105 */
  233                         OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)        /* cam_d7.gpio_106 */
  234                         OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)        /* cam_d8.gpio_107 */
  235                         OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)        /* cam_d9.gpio_108 */
  236                         OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)        /* cam_d10.gpio_109 */
  237                 >;
  238         };
  239 
  240         musb_pins: pinmux_musb_pins {
  241                 pinctrl-single,pins = <
  242                         OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)        /* hsusb0_clk.hsusb0_clk */
  243                         OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)        /* hsusb0_data0.hsusb0_data0 */
  244                         OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)        /* hsusb0_data1.hsusb0_data1 */
  245                         OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)        /* hsusb0_data2.hsusb0_data2 */
  246                         OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)        /* hsusb0_data3.hsusb0_data3 */
  247                         OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)        /* hsusb0_data4.hsusb0_data4 */
  248                         OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)        /* hsusb0_data5.hsusb0_data5 */
  249                         OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)        /* hsusb0_data6.hsusb0_data6 */
  250                         OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)        /* hsusb0_data7.hsusb0_data7 */
  251                         OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)        /* hsusb0_dir.hsusb0_dir */
  252                         OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)        /* hsusb0_nxt.hsusb0_nxt */
  253                         OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)       /* hsusb0_stp.hsusb0_stp */
  254                 >;
  255         };
  256 
  257         mmc1_pins: pinmux_mmc1_pins {
  258                 pinctrl-single,pins = <
  259                         OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
  260                         OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
  261                         OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
  262                         OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
  263                         OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
  264                         OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
  265                 >;
  266         };
  267 };
  268 
  269 &twl_keypad {
  270         linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
  271                         MATRIX_KEY(0, 1, KEY_2)
  272                         MATRIX_KEY(0, 2, KEY_3)
  273                         MATRIX_KEY(1, 0, KEY_4)
  274                         MATRIX_KEY(1, 1, KEY_5)
  275                         MATRIX_KEY(1, 2, KEY_6)
  276                         MATRIX_KEY(1, 3, KEY_F5)
  277                         MATRIX_KEY(2, 0, KEY_7)
  278                         MATRIX_KEY(2, 1, KEY_8)
  279                         MATRIX_KEY(2, 2, KEY_9)
  280                         MATRIX_KEY(2, 3, KEY_F6)
  281                         MATRIX_KEY(3, 0, KEY_F7)
  282                         MATRIX_KEY(3, 1, KEY_0)
  283                         MATRIX_KEY(3, 2, KEY_F8)
  284                         MATRIX_KEY(5, 4, KEY_RESERVED)
  285                         MATRIX_KEY(4, 4, KEY_VOLUMEUP)
  286                         MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
  287 };
  288 
  289 &uart3 {
  290         interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
  291 };
  292 
  293 &usb_otg_hs {
  294         pinctrl-names = "default";
  295         pinctrl-0 = <&musb_pins>;
  296         interface-type = <0>;
  297         usb-phy = <&usb2_phy>;
  298         mode = <3>;
  299         power = <50>;
  300 };
  301 
  302 &vaux1 {
  303         /* Needed for ads7846 */
  304         regulator-name = "vcc";
  305 };
Cache object: 3203aca2054ad958327016729169e904
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/omap3-ldp.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/omap3-ldp.dts
