Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/omap5.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ 4 * 5 * Based on "omap4.dtsi" 6 */ 7 8 #include <dt-bindings/bus/ti-sysc.h> 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/pinctrl/omap.h> 12 #include <dt-bindings/clock/omap5.h> 13 14 / { 15 #address-cells = <2>; 16 #size-cells = <2>; 17 18 compatible = "ti,omap5"; 19 interrupt-parent = <&wakeupgen>; 20 chosen { }; 21 22 aliases { 23 i2c0 = &i2c1; 24 i2c1 = &i2c2; 25 i2c2 = &i2c3; 26 i2c3 = &i2c4; 27 i2c4 = &i2c5; 28 mmc0 = &mmc1; 29 mmc1 = &mmc2; 30 mmc2 = &mmc3; 31 mmc3 = &mmc4; 32 mmc4 = &mmc5; 33 serial0 = &uart1; 34 serial1 = &uart2; 35 serial2 = &uart3; 36 serial3 = &uart4; 37 serial4 = &uart5; 38 serial5 = &uart6; 39 rproc0 = &dsp; 40 rproc1 = &ipu; 41 }; 42 43 cpus { 44 #address-cells = <1>; 45 #size-cells = <0>; 46 47 cpu0: cpu@0 { 48 device_type = "cpu"; 49 compatible = "arm,cortex-a15"; 50 reg = <0x0>; 51 52 operating-points = < 53 /* kHz uV */ 54 1000000 1060000 55 1500000 1250000 56 >; 57 58 clocks = <&dpll_mpu_ck>; 59 clock-names = "cpu"; 60 61 clock-latency = <300000>; /* From omap-cpufreq driver */ 62 63 /* cooling options */ 64 #cooling-cells = <2>; /* min followed by max */ 65 }; 66 cpu@1 { 67 device_type = "cpu"; 68 compatible = "arm,cortex-a15"; 69 reg = <0x1>; 70 71 operating-points = < 72 /* kHz uV */ 73 1000000 1060000 74 1500000 1250000 75 >; 76 77 clocks = <&dpll_mpu_ck>; 78 clock-names = "cpu"; 79 80 clock-latency = <300000>; /* From omap-cpufreq driver */ 81 82 /* cooling options */ 83 #cooling-cells = <2>; /* min followed by max */ 84 }; 85 }; 86 87 thermal-zones { 88 #include "omap4-cpu-thermal.dtsi" 89 #include "omap5-gpu-thermal.dtsi" 90 #include "omap5-core-thermal.dtsi" 91 }; 92 93 timer { 94 compatible = "arm,armv7-timer"; 95 /* PPI secure/nonsecure IRQ */ 96 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, 97 <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, 98 <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>, 99 <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>; 100 interrupt-parent = <&gic>; 101 }; 102 103 pmu { 104 compatible = "arm,cortex-a15-pmu"; 105 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, 106 <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; 107 }; 108 109 /* 110 * Needed early by omap4_sram_init() for barrier, do not move to l3 111 * interconnect as simple-pm-bus probes at module_init() time. 112 */ 113 ocmcram: sram@40300000 { 114 compatible = "mmio-sram"; 115 reg = <0 0x40300000 0 0x20000>; /* 128k */ 116 }; 117 118 gic: interrupt-controller@48211000 { 119 compatible = "arm,cortex-a15-gic"; 120 interrupt-controller; 121 #interrupt-cells = <3>; 122 reg = <0 0x48211000 0 0x1000>, 123 <0 0x48212000 0 0x2000>, 124 <0 0x48214000 0 0x2000>, 125 <0 0x48216000 0 0x2000>; 126 interrupt-parent = <&gic>; 127 }; 128 129 wakeupgen: interrupt-controller@48281000 { 130 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; 131 interrupt-controller; 132 #interrupt-cells = <3>; 133 reg = <0 0x48281000 0 0x1000>; 134 interrupt-parent = <&gic>; 135 }; 136 137 /* 138 * XXX: Use a flat representation of the OMAP3 interconnect. 139 * The real OMAP interconnect network is quite complex. 140 * Since it will not bring real advantage to represent that in DT for 141 * the moment, just use a fake OCP bus entry to represent the whole bus 142 * hierarchy. 143 */ 144 ocp { 145 compatible = "simple-pm-bus"; 146 power-domains = <&prm_core>; 147 clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>, 148 <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>, 149 <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>; 150 #address-cells = <1>; 151 #size-cells = <1>; 152 ranges = <0 0 0 0xc0000000>; 153 dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; 154 155 l3-noc@44000000 { 156 compatible = "ti,omap5-l3-noc"; 157 reg = <0x44000000 0x2000>, 158 <0x44800000 0x3000>, 159 <0x45000000 0x4000>; 160 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, 161 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 162 }; 163 164 l4_wkup: interconnect@4ae00000 { 165 }; 166 167 l4_cfg: interconnect@4a000000 { 168 }; 169 170 l4_per: interconnect@48000000 { 171 }; 172 173 target-module@48210000 { 174 compatible = "ti,sysc-omap4-simple", "ti,sysc"; 175 power-domains = <&prm_mpu>; 176 clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>; 177 clock-names = "fck"; 178 #address-cells = <1>; 179 #size-cells = <1>; 180 ranges = <0 0x48210000 0x1f0000>; 181 182 mpu { 183 compatible = "ti,omap4-mpu"; 184 sram = <&ocmcram>; 185 }; 186 }; 187 188 l4_abe: interconnect@40100000 { 189 }; 190 191 target-module@50000000 { 192 compatible = "ti,sysc-omap2", "ti,sysc"; 193 reg = <0x50000000 4>, 194 <0x50000010 4>, 195 <0x50000014 4>; 196 reg-names = "rev", "sysc", "syss"; 197 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 198 <SYSC_IDLE_NO>, 199 <SYSC_IDLE_SMART>; 200 ti,syss-mask = <1>; 201 ti,no-idle-on-init; 202 clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>; 203 clock-names = "fck"; 204 #address-cells = <1>; 205 #size-cells = <1>; 206 ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ 207 <0x00000000 0x00000000 0x40000000>; /* data */ 208 209 gpmc: gpmc@50000000 { 210 compatible = "ti,omap4430-gpmc"; 211 reg = <0x50000000 0x1000>; 212 #address-cells = <2>; 213 #size-cells = <1>; 214 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 215 dmas = <&sdma 4>; 216 dma-names = "rxtx"; 217 gpmc,num-cs = <8>; 218 gpmc,num-waitpins = <4>; 219 clock-names = "fck"; 220 interrupt-controller; 221 #interrupt-cells = <2>; 222 gpio-controller; 223 #gpio-cells = <2>; 224 }; 225 }; 226 227 target-module@55082000 { 228 compatible = "ti,sysc-omap2", "ti,sysc"; 229 reg = <0x55082000 0x4>, 230 <0x55082010 0x4>, 231 <0x55082014 0x4>; 232 reg-names = "rev", "sysc", "syss"; 233 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 234 <SYSC_IDLE_NO>, 235 <SYSC_IDLE_SMART>; 236 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | 237 SYSC_OMAP2_SOFTRESET | 238 SYSC_OMAP2_AUTOIDLE)>; 239 clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; 240 clock-names = "fck"; 241 resets = <&prm_core 2>; 242 reset-names = "rstctrl"; 243 ranges = <0x0 0x55082000 0x100>; 244 #size-cells = <1>; 245 #address-cells = <1>; 246 247 mmu_ipu: mmu@0 { 248 compatible = "ti,omap4-iommu"; 249 reg = <0x0 0x100>; 250 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; 251 #iommu-cells = <0>; 252 ti,iommu-bus-err-back; 253 }; 254 }; 255 256 dsp: dsp { 257 compatible = "ti,omap5-dsp"; 258 ti,bootreg = <&scm_conf 0x304 0>; 259 iommus = <&mmu_dsp>; 260 resets = <&prm_dsp 0>; 261 clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>; 262 firmware-name = "omap5-dsp-fw.xe64T"; 263 mboxes = <&mailbox &mbox_dsp>; 264 status = "disabled"; 265 }; 266 267 ipu: ipu@55020000 { 268 compatible = "ti,omap5-ipu"; 269 reg = <0x55020000 0x10000>; 270 reg-names = "l2ram"; 271 iommus = <&mmu_ipu>; 272 resets = <&prm_core 0>, <&prm_core 1>; 273 clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; 274 firmware-name = "omap5-ipu-fw.xem4"; 275 mboxes = <&mailbox &mbox_ipu>; 276 status = "disabled"; 277 }; 278 279 target-module@4e000000 { 280 compatible = "ti,sysc-omap2", "ti,sysc"; 281 reg = <0x4e000000 0x4>, 282 <0x4e000010 0x4>; 283 reg-names = "rev", "sysc"; 284 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 285 <SYSC_IDLE_NO>, 286 <SYSC_IDLE_SMART>; 287 ranges = <0x0 0x4e000000 0x2000000>; 288 #size-cells = <1>; 289 #address-cells = <1>; 290 291 dmm@0 { 292 compatible = "ti,omap5-dmm"; 293 reg = <0 0x800>; 294 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; 295 }; 296 }; 297 298 target-module@4c000000 { 299 compatible = "ti,sysc-omap4-simple", "ti,sysc"; 300 reg = <0x4c000000 0x4>; 301 reg-names = "rev"; 302 clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>; 303 clock-names = "fck"; 304 ti,no-idle; 305 #address-cells = <1>; 306 #size-cells = <1>; 307 ranges = <0x0 0x4c000000 0x1000000>; 308 309 emif1: emif@0 { 310 compatible = "ti,emif-4d5"; 311 reg = <0 0x400>; 312 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; 313 phy-type = <2>; /* DDR PHY type: Intelli PHY */ 314 hw-caps-read-idle-ctrl; 315 hw-caps-ll-interface; 316 hw-caps-temp-alert; 317 }; 318 }; 319 320 target-module@4d000000 { 321 compatible = "ti,sysc-omap4-simple", "ti,sysc"; 322 reg = <0x4d000000 0x4>; 323 reg-names = "rev"; 324 clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>; 325 clock-names = "fck"; 326 ti,no-idle; 327 #address-cells = <1>; 328 #size-cells = <1>; 329 ranges = <0x0 0x4d000000 0x1000000>; 330 331 emif2: emif@0 { 332 compatible = "ti,emif-4d5"; 333 reg = <0 0x400>; 334 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; 335 phy-type = <2>; /* DDR PHY type: Intelli PHY */ 336 hw-caps-read-idle-ctrl; 337 hw-caps-ll-interface; 338 hw-caps-temp-alert; 339 }; 340 }; 341 342 aes1_target: target-module@4b501000 { 343 compatible = "ti,sysc-omap2", "ti,sysc"; 344 reg = <0x4b501080 0x4>, 345 <0x4b501084 0x4>, 346 <0x4b501088 0x4>; 347 reg-names = "rev", "sysc", "syss"; 348 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | 349 SYSC_OMAP2_AUTOIDLE)>; 350 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 351 <SYSC_IDLE_NO>, 352 <SYSC_IDLE_SMART>, 353 <SYSC_IDLE_SMART_WKUP>; 354 ti,syss-mask = <1>; 355 /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ 356 clocks = <&l4sec_clkctrl OMAP5_AES1_CLKCTRL 0>; 357 clock-names = "fck"; 358 #address-cells = <1>; 359 #size-cells = <1>; 360 ranges = <0x0 0x4b501000 0x1000>; 361 362 aes1: aes@0 { 363 compatible = "ti,omap4-aes"; 364 reg = <0 0xa0>; 365 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 366 dmas = <&sdma 111>, <&sdma 110>; 367 dma-names = "tx", "rx"; 368 }; 369 }; 370 371 aes2_target: target-module@4b701000 { 372 compatible = "ti,sysc-omap2", "ti,sysc"; 373 reg = <0x4b701080 0x4>, 374 <0x4b701084 0x4>, 375 <0x4b701088 0x4>; 376 reg-names = "rev", "sysc", "syss"; 377 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | 378 SYSC_OMAP2_AUTOIDLE)>; 379 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 380 <SYSC_IDLE_NO>, 381 <SYSC_IDLE_SMART>, 382 <SYSC_IDLE_SMART_WKUP>; 383 ti,syss-mask = <1>; 384 /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ 385 clocks = <&l4sec_clkctrl OMAP5_AES2_CLKCTRL 0>; 386 clock-names = "fck"; 387 #address-cells = <1>; 388 #size-cells = <1>; 389 ranges = <0x0 0x4b701000 0x1000>; 390 391 aes2: aes@0 { 392 compatible = "ti,omap4-aes"; 393 reg = <0 0xa0>; 394 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; 395 dmas = <&sdma 114>, <&sdma 113>; 396 dma-names = "tx", "rx"; 397 }; 398 }; 399 400 sham_target: target-module@4b100000 { 401 compatible = "ti,sysc-omap3-sham", "ti,sysc"; 402 reg = <0x4b100100 0x4>, 403 <0x4b100110 0x4>, 404 <0x4b100114 0x4>; 405 reg-names = "rev", "sysc", "syss"; 406 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | 407 SYSC_OMAP2_AUTOIDLE)>; 408 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 409 <SYSC_IDLE_NO>, 410 <SYSC_IDLE_SMART>; 411 ti,syss-mask = <1>; 412 /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */ 413 clocks = <&l4sec_clkctrl OMAP5_SHA2MD5_CLKCTRL 0>; 414 clock-names = "fck"; 415 #address-cells = <1>; 416 #size-cells = <1>; 417 ranges = <0x0 0x4b100000 0x1000>; 418 419 sham: sham@0 { 420 compatible = "ti,omap4-sham"; 421 reg = <0 0x300>; 422 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; 423 dmas = <&sdma 119>; 424 dma-names = "rx"; 425 }; 426 }; 427 428 bandgap: bandgap@4a0021e0 { 429 reg = <0x4a0021e0 0xc 430 0x4a00232c 0xc 431 0x4a002380 0x2c 432 0x4a0023C0 0x3c>; 433 interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; 434 compatible = "ti,omap5430-bandgap"; 435 436 #thermal-sensor-cells = <1>; 437 }; 438 439 target-module@56000000 { 440 compatible = "ti,sysc-omap4", "ti,sysc"; 441 reg = <0x5600fe00 0x4>, 442 <0x5600fe10 0x4>; 443 reg-names = "rev", "sysc"; 444 ti,sysc-midle = <SYSC_IDLE_FORCE>, 445 <SYSC_IDLE_NO>, 446 <SYSC_IDLE_SMART>; 447 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 448 <SYSC_IDLE_NO>, 449 <SYSC_IDLE_SMART>; 450 clocks = <&gpu_clkctrl OMAP5_GPU_CLKCTRL 0>; 451 clock-names = "fck"; 452 #address-cells = <1>; 453 #size-cells = <1>; 454 ranges = <0 0x56000000 0x2000000>; 455 456 /* 457 * Closed source PowerVR driver, no child device 458 * binding or driver in mainline 459 */ 460 }; 461 462 target-module@58000000 { 463 compatible = "ti,sysc-omap2", "ti,sysc"; 464 reg = <0x58000000 4>, 465 <0x58000014 4>; 466 reg-names = "rev", "syss"; 467 ti,syss-mask = <1>; 468 power-domains = <&prm_dss>; 469 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>, 470 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, 471 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>, 472 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>; 473 clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; 474 #address-cells = <1>; 475 #size-cells = <1>; 476 ranges = <0 0x58000000 0x1000000>; 477 478 dss: dss@0 { 479 compatible = "ti,omap5-dss"; 480 reg = <0 0x80>; 481 status = "disabled"; 482 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; 483 clock-names = "fck"; 484 #address-cells = <1>; 485 #size-cells = <1>; 486 ranges = <0 0 0x1000000>; 487 488 target-module@1000 { 489 compatible = "ti,sysc-omap2", "ti,sysc"; 490 reg = <0x1000 0x4>, 491 <0x1010 0x4>, 492 <0x1014 0x4>; 493 reg-names = "rev", "sysc", "syss"; 494 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 495 <SYSC_IDLE_NO>, 496 <SYSC_IDLE_SMART>; 497 ti,sysc-midle = <SYSC_IDLE_FORCE>, 498 <SYSC_IDLE_NO>, 499 <SYSC_IDLE_SMART>; 500 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | 501 SYSC_OMAP2_ENAWAKEUP | 502 SYSC_OMAP2_SOFTRESET | 503 SYSC_OMAP2_AUTOIDLE)>; 504 ti,syss-mask = <1>; 505 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; 506 clock-names = "fck"; 507 #address-cells = <1>; 508 #size-cells = <1>; 509 ranges = <0 0x1000 0x1000>; 510 511 dispc@0 { 512 compatible = "ti,omap5-dispc"; 513 reg = <0 0x1000>; 514 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; 515 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; 516 clock-names = "fck"; 517 }; 518 }; 519 520 target-module@2000 { 521 compatible = "ti,sysc-omap2", "ti,sysc"; 522 reg = <0x2000 0x4>, 523 <0x2010 0x4>, 524 <0x2014 0x4>; 525 reg-names = "rev", "sysc", "syss"; 526 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 527 <SYSC_IDLE_NO>, 528 <SYSC_IDLE_SMART>; 529 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | 530 SYSC_OMAP2_AUTOIDLE)>; 531 ti,syss-mask = <1>; 532 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; 533 clock-names = "fck"; 534 #address-cells = <1>; 535 #size-cells = <1>; 536 ranges = <0 0x2000 0x1000>; 537 538 rfbi: encoder@0 { 539 compatible = "ti,omap5-rfbi"; 540 reg = <0 0x100>; 541 status = "disabled"; 542 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>; 543 clock-names = "fck", "ick"; 544 }; 545 }; 546 547 target-module@4000 { 548 compatible = "ti,sysc-omap2", "ti,sysc"; 549 reg = <0x4000 0x4>, 550 <0x4010 0x4>, 551 <0x4014 0x4>; 552 reg-names = "rev", "sysc", "syss"; 553 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 554 <SYSC_IDLE_NO>, 555 <SYSC_IDLE_SMART>; 556 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | 557 SYSC_OMAP2_ENAWAKEUP | 558 SYSC_OMAP2_SOFTRESET | 559 SYSC_OMAP2_AUTOIDLE)>; 560 ti,syss-mask = <1>; 561 #address-cells = <1>; 562 #size-cells = <1>; 563 ranges = <0 0x4000 0x1000>; 564 565 dsi1: encoder@0 { 566 compatible = "ti,omap5-dsi"; 567 reg = <0 0x200>, 568 <0x200 0x40>, 569 <0x300 0x40>; 570 reg-names = "proto", "phy", "pll"; 571 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; 572 status = "disabled"; 573 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, 574 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; 575 clock-names = "fck", "sys_clk"; 576 577 #address-cells = <1>; 578 #size-cells = <0>; 579 }; 580 }; 581 582 target-module@9000 { 583 compatible = "ti,sysc-omap2", "ti,sysc"; 584 reg = <0x9000 0x4>, 585 <0x9010 0x4>, 586 <0x9014 0x4>; 587 reg-names = "rev", "sysc", "syss"; 588 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 589 <SYSC_IDLE_NO>, 590 <SYSC_IDLE_SMART>; 591 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | 592 SYSC_OMAP2_ENAWAKEUP | 593 SYSC_OMAP2_SOFTRESET | 594 SYSC_OMAP2_AUTOIDLE)>; 595 ti,syss-mask = <1>; 596 #address-cells = <1>; 597 #size-cells = <1>; 598 ranges = <0 0x9000 0x1000>; 599 600 dsi2: encoder@0 { 601 compatible = "ti,omap5-dsi"; 602 reg = <0 0x200>, 603 <0x200 0x40>, 604 <0x300 0x40>; 605 reg-names = "proto", "phy", "pll"; 606 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; 607 status = "disabled"; 608 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, 609 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; 610 clock-names = "fck", "sys_clk"; 611 612 #address-cells = <1>; 613 #size-cells = <0>; 614 }; 615 }; 616 617 target-module@40000 { 618 compatible = "ti,sysc-omap4", "ti,sysc"; 619 reg = <0x40000 0x4>, 620 <0x40010 0x4>; 621 reg-names = "rev", "sysc"; 622 ti,sysc-sidle = <SYSC_IDLE_FORCE>, 623 <SYSC_IDLE_NO>, 624 <SYSC_IDLE_SMART>, 625 <SYSC_IDLE_SMART_WKUP>; 626 ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; 627 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, 628 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; 629 clock-names = "fck", "dss_clk"; 630 #address-cells = <1>; 631 #size-cells = <1>; 632 ranges = <0 0x40000 0x40000>; 633 634 hdmi: encoder@0 { 635 compatible = "ti,omap5-hdmi"; 636 reg = <0 0x200>, 637 <0x200 0x80>, 638 <0x300 0x80>, 639 <0x20000 0x19000>; 640 reg-names = "wp", "pll", "phy", "core"; 641 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; 642 status = "disabled"; 643 clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, 644 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; 645 clock-names = "fck", "sys_clk"; 646 dmas = <&sdma 76>; 647 dma-names = "audio_tx"; 648 }; 649 }; 650 }; 651 }; 652 653 abb_mpu: regulator-abb-mpu { 654 compatible = "ti,abb-v2"; 655 regulator-name = "abb_mpu"; 656 #address-cells = <0>; 657 #size-cells = <0>; 658 clocks = <&sys_clkin>; 659 ti,settling-time = <50>; 660 ti,clock-cycles = <16>; 661 662 reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, 663 <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; 664 reg-names = "base-address", "int-address", 665 "efuse-address", "ldo-address"; 666 ti,tranxdone-status-mask = <0x80>; 667 /* LDOVBBMPU_MUX_CTRL */ 668 ti,ldovbb-override-mask = <0x400>; 669 /* LDOVBBMPU_VSET_OUT */ 670 ti,ldovbb-vset-mask = <0x1F>; 671 672 /* 673 * NOTE: only FBB mode used but actual vset will 674 * determine final biasing 675 */ 676 ti,abb_info = < 677 /*uV ABB efuse rbb_m fbb_m vset_m*/ 678 1060000 0 0x0 0 0x02000000 0x01F00000 679 1250000 0 0x4 0 0x02000000 0x01F00000 680 >; 681 }; 682 683 abb_mm: regulator-abb-mm { 684 compatible = "ti,abb-v2"; 685 regulator-name = "abb_mm"; 686 #address-cells = <0>; 687 #size-cells = <0>; 688 clocks = <&sys_clkin>; 689 ti,settling-time = <50>; 690 ti,clock-cycles = <16>; 691 692 reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, 693 <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; 694 reg-names = "base-address", "int-address", 695 "efuse-address", "ldo-address"; 696 ti,tranxdone-status-mask = <0x80000000>; 697 /* LDOVBBMM_MUX_CTRL */ 698 ti,ldovbb-override-mask = <0x400>; 699 /* LDOVBBMM_VSET_OUT */ 700 ti,ldovbb-vset-mask = <0x1F>; 701 702 /* 703 * NOTE: only FBB mode used but actual vset will 704 * determine final biasing 705 */ 706 ti,abb_info = < 707 /*uV ABB efuse rbb_m fbb_m vset_m*/ 708 1025000 0 0x0 0 0x02000000 0x01F00000 709 1120000 0 0x4 0 0x02000000 0x01F00000 710 >; 711 }; 712 }; 713 }; 714 715 &cpu_thermal { 716 polling-delay = <500>; /* milliseconds */ 717 coefficients = <65 (-1791)>; 718 }; 719 720 #include "omap5-l4.dtsi" 721 #include "omap54xx-clocks.dtsi" 722 723 &gpu_thermal { 724 coefficients = <117 (-2992)>; 725 }; 726 727 &core_thermal { 728 coefficients = <0 2000>; 729 }; 730 731 #include "omap5-l4-abe.dtsi" 732 #include "omap54xx-clocks.dtsi" 733 734 &prm { 735 prm_mpu: prm@300 { 736 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 737 reg = <0x300 0x100>; 738 #power-domain-cells = <0>; 739 }; 740 741 prm_dsp: prm@400 { 742 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 743 reg = <0x400 0x100>; 744 #reset-cells = <1>; 745 #power-domain-cells = <0>; 746 }; 747 748 prm_abe: prm@500 { 749 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 750 reg = <0x500 0x100>; 751 #power-domain-cells = <0>; 752 }; 753 754 prm_coreaon: prm@600 { 755 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 756 reg = <0x600 0x100>; 757 #power-domain-cells = <0>; 758 }; 759 760 prm_core: prm@700 { 761 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 762 reg = <0x700 0x100>; 763 #reset-cells = <1>; 764 #power-domain-cells = <0>; 765 }; 766 767 prm_iva: prm@1200 { 768 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 769 reg = <0x1200 0x100>; 770 #reset-cells = <1>; 771 #power-domain-cells = <0>; 772 }; 773 774 prm_cam: prm@1300 { 775 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 776 reg = <0x1300 0x100>; 777 #power-domain-cells = <0>; 778 }; 779 780 prm_dss: prm@1400 { 781 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 782 reg = <0x1400 0x100>; 783 #power-domain-cells = <0>; 784 }; 785 786 prm_gpu: prm@1500 { 787 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 788 reg = <0x1500 0x100>; 789 #power-domain-cells = <0>; 790 }; 791 792 prm_l3init: prm@1600 { 793 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 794 reg = <0x1600 0x100>; 795 #power-domain-cells = <0>; 796 }; 797 798 prm_custefuse: prm@1700 { 799 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 800 reg = <0x1700 0x100>; 801 #power-domain-cells = <0>; 802 }; 803 804 prm_wkupaon: prm@1800 { 805 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 806 reg = <0x1800 0x100>; 807 #power-domain-cells = <0>; 808 }; 809 810 prm_emu: prm@1a00 { 811 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 812 reg = <0x1a00 0x100>; 813 #power-domain-cells = <0>; 814 }; 815 816 prm_device: prm@1c00 { 817 compatible = "ti,omap5-prm-inst", "ti,omap-prm-inst"; 818 reg = <0x1c00 0x100>; 819 #reset-cells = <1>; 820 }; 821 }; 822 823 /* Preferred always-on timer for clockevent */ 824 &timer1_target { 825 ti,no-reset-on-init; 826 ti,no-idle; 827 timer@0 { 828 assigned-clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; 829 assigned-clock-parents = <&sys_32k_ck>; 830 }; 831 };
Cache object: e1ed69ce3ca79eebc5a8b4ca9bafb385
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]