orion5x-netgear-wnr854t.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-only
    2 // Copyright (C) 2016 Jamie Lentin <jm@lentin.co.uk>
    3 
    4 /dts-v1/;
    5 
    6 #include <dt-bindings/gpio/gpio.h>
    7 #include <dt-bindings/input/input.h>
    8 #include "orion5x-mv88f5181.dtsi"
    9 
   10 / {
   11         model = "Netgear WNR854-t";
   12         compatible = "netgear,wnr854t", "marvell,orion5x-88f5181",
   13                      "marvell,orion5x";
   14         aliases {
   15                 serial0 = &uart0;
   16         };
   17 
   18         memory {
   19                 device_type = "memory";
   20                 reg = <0x00000000 0x2000000>; /* 32 MB */
   21         };
   22 
   23         chosen {
   24                 stdout-path = "serial0:115200n8";
   25         };
   26 
   27         soc {
   28                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
   29                          <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
   30                          <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
   31         };
   32 
   33         gpio-keys {
   34                 compatible = "gpio-keys";
   35                 pinctrl-0 = <&pmx_reset_button>;
   36                 pinctrl-names = "default";
   37 
   38                 reset {
   39                         label = "Reset Button";
   40                         linux,code = <KEY_RESTART>;
   41                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
   42                 };
   43         };
   44 
   45         gpio-leds {
   46                 compatible = "gpio-leds";
   47                 pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
   48                 pinctrl-names = "default";
   49 
   50                 led@0 {
   51                         label = "wnr854t:green:power";
   52                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
   53                 };
   54 
   55                 led@1 {
   56                         label = "wnr854t:blink:power";
   57                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
   58                 };
   59 
   60                 led@2 {
   61                         label = "wnr854t:green:wan";
   62                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
   63                 };
   64         };
   65 };
   66 
   67 &devbus_bootcs {
   68         status = "okay";
   69 
   70         devbus,keep-config;
   71 
   72         flash@0 {
   73                 compatible = "cfi-flash";
   74                 reg = <0 0x800000>;
   75                 bank-width = <2>;
   76 
   77                 partitions {
   78                         compatible = "fixed-partitions";
   79                         #address-cells = <1>;
   80                         #size-cells = <1>;
   81 
   82                         partition@0 {
   83                                 label = "kernel";
   84                                 reg = <0x0 0x100000>;
   85                         };
   86 
   87                         partition@100000 {
   88                                 label = "rootfs";
   89                                 reg = <0x100000 0x660000>;
   90                         };
   91 
   92                         partition@760000 {
   93                                 label = "uboot_env";
   94                                 reg = <0x760000 0x20000>;
   95                         };
   96 
   97                         partition@780000 {
   98                                 label = "uboot";
   99                                 reg = <0x780000 0x80000>;
  100                                 read-only;
  101                         };
  102                 };
  103         };
  104 };
  105 
  106 &mdio {
  107         status = "okay";
  108 
  109         switch: switch@0 {
  110                 compatible = "marvell,mv88e6085";
  111                 #address-cells = <1>;
  112                 #size-cells = <0>;
  113                 reg = <0>;
  114                 dsa,member = <0 0>;
  115 
  116                 ports {
  117                         #address-cells = <1>;
  118                         #size-cells = <0>;
  119 
  120                         port@0 {
  121                                 reg = <0>;
  122                                 label = "lan3";
  123                                 phy-handle = <&lan3phy>;
  124                         };
  125 
  126                         port@1 {
  127                                 reg = <1>;
  128                                 label = "lan4";
  129                                 phy-handle = <&lan4phy>;
  130                         };
  131 
  132                         port@2 {
  133                                 reg = <2>;
  134                                 label = "wan";
  135                                 phy-handle = <&wanphy>;
  136                         };
  137 
  138                         port@3 {
  139                                 reg = <3>;
  140                                 label = "cpu";
  141                                 ethernet = <&ethport>;
  142                         };
  143 
  144                         port@5 {
  145                                 reg = <5>;
  146                                 label = "lan1";
  147                                 phy-handle = <&lan1phy>;
  148                         };
  149 
  150                         port@7 {
  151                                 reg = <7>;
  152                                 label = "lan2";
  153                                 phy-handle = <&lan2phy>;
  154                         };
  155                 };
  156 
  157                 mdio {
  158                         #address-cells = <1>;
  159                         #size-cells = <0>;
  160 
  161                         lan3phy: ethernet-phy@0 {
  162                                 /* Marvell 88E1121R (port 1) */
  163                                 compatible = "ethernet-phy-id0141.0cb0",
  164                                              "ethernet-phy-ieee802.3-c22";
  165                                 reg = <0>;
  166                                 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
  167                         };
  168 
  169                         lan4phy: ethernet-phy@1 {
  170                                 /* Marvell 88E1121R (port 2) */
  171                                 compatible = "ethernet-phy-id0141.0cb0",
  172                                              "ethernet-phy-ieee802.3-c22";
  173                                 reg = <1>;
  174                                 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
  175                         };
  176 
  177                         wanphy: ethernet-phy@2 {
  178                                 /* Marvell 88E1121R (port 1) */
  179                                 compatible = "ethernet-phy-id0141.0cb0",
  180                                              "ethernet-phy-ieee802.3-c22";
  181                                 reg = <2>;
  182                                 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
  183                         };
  184 
  185                         lan1phy: ethernet-phy@5 {
  186                                 /* Marvell 88E1112 */
  187                                 compatible = "ethernet-phy-id0141.0cb0",
  188                                              "ethernet-phy-ieee802.3-c22";
  189                                 reg = <5>;
  190                                 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
  191                         };
  192 
  193                         lan2phy: ethernet-phy@7 {
  194                                 /* Marvell 88E1112 */
  195                                 compatible = "ethernet-phy-id0141.0cb0",
  196                                              "ethernet-phy-ieee802.3-c22";
  197                                 reg = <7>;
  198                                 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
  199                         };
  200                 };
  201         };
  202 };
  203 
  204 &eth {
  205         status = "okay";
  206 
  207         ethernet-port@0 {
  208                 /* Hardwired to DSA switch */
  209                 speed = <1000>;
  210                 duplex = <1>;
  211         };
  212 };
  213 
  214 &pinctrl {
  215         pinctrl-0 = <&pmx_pci_gpios>;
  216         pinctrl-names = "default";
  217 
  218         pmx_power_led: pmx-power-led {
  219                 marvell,pins = "mpp0";
  220                 marvell,function = "gpio";
  221         };
  222 
  223         pmx_reset_button: pmx-reset-button {
  224                 marvell,pins = "mpp1";
  225                 marvell,function = "gpio";
  226         };
  227 
  228         pmx_power_led_blink: pmx-power-led-blink {
  229                 marvell,pins = "mpp2";
  230                 marvell,function = "gpio";
  231         };
  232 
  233         pmx_wan_led: pmx-wan-led {
  234                 marvell,pins = "mpp3";
  235                 marvell,function = "gpio";
  236         };
  237 
  238         pmx_pci_gpios: pmx-pci-gpios {
  239                 marvell,pins = "mpp4";
  240                 marvell,function = "gpio";
  241         };
  242 };
  243 
  244 &uart0 {
  245         /* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */
  246         status = "okay";
  247 };

Cache object: a2bb37cf0d8fe3ffc5bdea9a0f711728

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/orion5x-netgear-wnr854t.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/orion5x-netgear-wnr854t.dts