qcom-apq8064-ifc6410.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 #include "qcom-apq8064-v2.0.dtsi"
    3 #include <dt-bindings/gpio/gpio.h>
    4 #include <dt-bindings/leds/common.h>
    5 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
    6 
    7 / {
    8         model = "Qualcomm APQ8064/IFC6410";
    9         compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
   10 
   11         aliases {
   12                 serial0 = &gsbi7_serial;
   13                 serial1 = &gsbi6_serial;
   14                 i2c0 = &gsbi1_i2c;
   15                 i2c1 = &gsbi2_i2c;
   16                 i2c2 = &gsbi3_i2c;
   17                 i2c3 = &gsbi4_i2c;
   18                 spi0 = &gsbi5_spi;
   19         };
   20 
   21         chosen {
   22                 stdout-path = "serial0:115200n8";
   23         };
   24 
   25         pwrseq {
   26                 compatible = "simple-bus";
   27 
   28                 sdcc4_pwrseq: sdcc4_pwrseq {
   29                         pinctrl-names = "default";
   30                         pinctrl-0 = <&wlan_default_gpios>;
   31                         compatible = "mmc-pwrseq-simple";
   32                         reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
   33                 };
   34         };
   35 
   36         leds {
   37                 compatible = "gpio-leds";
   38                 pinctrl-names = "default";
   39                 pinctrl-0 = <&notify_led>;
   40 
   41                 led@1 {
   42                         label = "apq8064:green:user1";
   43                         color = <LED_COLOR_ID_GREEN>;
   44                         gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
   45                         default-state = "on";
   46                 };
   47         };
   48 
   49         hdmi-out {
   50                 compatible = "hdmi-connector";
   51                 type = "d";
   52 
   53                 port {
   54                         hdmi_con: endpoint {
   55                                 remote-endpoint = <&hdmi_out>;
   56                         };
   57                 };
   58         };
   59 
   60         soc {
   61                 pinctrl@800000 {
   62                         card_detect: card_detect {
   63                                 mux {
   64                                         pins = "gpio26";
   65                                         function = "gpio";
   66                                         bias-disable;
   67                                 };
   68                         };
   69 
   70                         pcie_pins: pcie_pinmux {
   71                                 mux {
   72                                         pins = "gpio27";
   73                                         function = "gpio";
   74                                 };
   75                                 conf {
   76                                         pins = "gpio27";
   77                                         drive-strength = <12>;
   78                                         bias-disable;
   79                                 };
   80                         };
   81                 };
   82 
   83                 rpm@108000 {
   84                         regulators {
   85                                 vin_lvs1_3_6-supply = <&pm8921_s4>;
   86                                 vin_lvs2-supply = <&pm8921_s1>;
   87                                 vin_lvs4_5_7-supply = <&pm8921_s4>;
   88 
   89                                 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
   90                                 vdd_l24-supply = <&pm8921_s1>;
   91                                 vdd_l25-supply = <&pm8921_s1>;
   92                                 vdd_l26-supply = <&pm8921_s7>;
   93                                 vdd_l27-supply = <&pm8921_s7>;
   94                                 vdd_l28-supply = <&pm8921_s7>;
   95 
   96 
   97                                 /* Buck SMPS */
   98                                 s1 {
   99                                         regulator-always-on;
  100                                         regulator-min-microvolt = <1225000>;
  101                                         regulator-max-microvolt = <1225000>;
  102                                         qcom,switch-mode-frequency = <3200000>;
  103                                         bias-pull-down;
  104                                 };
  105 
  106                                 s3 {
  107                                         regulator-min-microvolt = <1000000>;
  108                                         regulator-max-microvolt = <1400000>;
  109                                         qcom,switch-mode-frequency = <4800000>;
  110                                 };
  111 
  112                                 s4 {
  113                                         regulator-min-microvolt = <1800000>;
  114                                         regulator-max-microvolt = <1800000>;
  115                                         qcom,switch-mode-frequency = <3200000>;
  116                                 };
  117 
  118                                 s7 {
  119                                         regulator-min-microvolt = <1300000>;
  120                                         regulator-max-microvolt = <1300000>;
  121                                         qcom,switch-mode-frequency = <3200000>;
  122                                 };
  123 
  124                                 l3 {
  125                                         regulator-min-microvolt = <3050000>;
  126                                         regulator-max-microvolt = <3300000>;
  127                                         bias-pull-down;
  128                                 };
  129 
  130                                 l4 {
  131                                         regulator-min-microvolt = <1000000>;
  132                                         regulator-max-microvolt = <1800000>;
  133                                         bias-pull-down;
  134                                 };
  135 
  136                                 l5 {
  137                                         regulator-min-microvolt = <2750000>;
  138                                         regulator-max-microvolt = <3000000>;
  139                                         bias-pull-down;
  140                                 };
  141 
  142                                 l6 {
  143                                         regulator-min-microvolt = <2950000>;
  144                                         regulator-max-microvolt = <2950000>;
  145                                         bias-pull-down;
  146                                 };
  147 
  148                                 l23 {
  149                                         regulator-min-microvolt = <1700000>;
  150                                         regulator-max-microvolt = <1900000>;
  151                                         bias-pull-down;
  152                                 };
  153 
  154                                 lvs1 {
  155                                         bias-pull-down;
  156                                 };
  157 
  158                                 lvs6 {
  159                                         bias-pull-down;
  160                                 };
  161                         };
  162                 };
  163 
  164                 ext_3p3v: regulator-fixed@1 {
  165                         compatible = "regulator-fixed";
  166                         regulator-min-microvolt = <3300000>;
  167                         regulator-max-microvolt = <3300000>;
  168                         regulator-name = "ext_3p3v";
  169                         regulator-type = "voltage";
  170                         startup-delay-us = <0>;
  171                         gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
  172                         enable-active-high;
  173                         regulator-boot-on;
  174                 };
  175 
  176                 gsbi3: gsbi@16200000 {
  177                         status = "okay";
  178                         qcom,mode = <GSBI_PROT_I2C>;
  179                         i2c@16280000 {
  180                                 status = "okay";
  181                         };
  182                 };
  183 
  184                 gsbi@16300000 {
  185                         status = "okay";
  186                         qcom,mode = <GSBI_PROT_I2C>;
  187                         /* CAM I2C MIPI-CSI connector */
  188                         i2c@16380000 {
  189                                 status = "okay";
  190                         };
  191                 };
  192 
  193                 gsbi@12440000 {
  194                         status = "okay";
  195                         qcom,mode = <GSBI_PROT_I2C>;
  196 
  197                         i2c@12460000 {
  198                                 status = "okay";
  199                                 clock-frequency = <200000>;
  200 
  201                                 eeprom@52 {
  202                                         compatible = "atmel,24c128";
  203                                         reg = <0x52>;
  204                                         pagesize = <32>;
  205                                 };
  206                         };
  207                 };
  208 
  209                 gsbi@1a200000 {
  210                         qcom,mode = <GSBI_PROT_SPI>;
  211                         status = "okay";
  212                         spi4: spi@1a280000 {
  213                                 status = "okay";
  214                                 num-cs = <1>;
  215                                 cs-gpios = <&tlmm_pinmux 53 0>;
  216                         };
  217                 };
  218 
  219                 gsbi@16500000 {
  220                         status = "okay";
  221                         qcom,mode = <GSBI_PROT_UART_W_FC>;
  222 
  223                         serial@16540000 {
  224                                 status = "okay";
  225                                 pinctrl-names = "default";
  226                                 pinctrl-0 = <&gsbi6_uart_4pins>;
  227                         };
  228                 };
  229 
  230                 gsbi@16600000 {
  231                         status = "okay";
  232                         qcom,mode = <GSBI_PROT_I2C_UART>;
  233                         serial@16640000 {
  234                                 status = "okay";
  235                                 pinctrl-names = "default";
  236                                 pinctrl-0 = <&gsbi7_uart_2pins>;
  237                         };
  238                 };
  239 
  240                 sata_phy0: phy@1b400000 {
  241                         status = "okay";
  242                 };
  243 
  244                 sata0: sata@29000000 {
  245                         status = "okay";
  246                         target-supply = <&pm8921_s4>;
  247                 };
  248 
  249                 /* OTG */
  250                 usb@12500000 {
  251                         status = "okay";
  252                         dr_mode = "otg";
  253                         ulpi {
  254                                 phy {
  255                                         v3p3-supply = <&pm8921_l3>;
  256                                         v1p8-supply = <&pm8921_l4>;
  257                                 };
  258                         };
  259                 };
  260 
  261                 usb@12520000 {
  262                         status = "okay";
  263                         dr_mode = "host";
  264                         ulpi {
  265                                 phy {
  266                                         v3p3-supply = <&pm8921_l3>;
  267                                         v1p8-supply = <&pm8921_l23>;
  268                                 };
  269                         };
  270                 };
  271 
  272                 usb@12530000 {
  273                         status = "okay";
  274                         dr_mode = "host";
  275                         ulpi {
  276                                 phy {
  277                                         v3p3-supply = <&pm8921_l3>;
  278                                         v1p8-supply = <&pm8921_l23>;
  279                                 };
  280                         };
  281                 };
  282 
  283                 pci@1b500000 {
  284                         status = "okay";
  285                         vdda-supply = <&pm8921_s3>;
  286                         vdda_phy-supply = <&pm8921_lvs6>;
  287                         vdda_refclk-supply = <&ext_3p3v>;
  288                         pinctrl-0 = <&pcie_pins>;
  289                         pinctrl-names = "default";
  290                         perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
  291                 };
  292 
  293                 qcom,ssbi@500000 {
  294                         pmic@0 {
  295                                 gpio@150 {
  296                                         wlan_default_gpios: wlan-gpios-state {
  297                                                 pinconf {
  298                                                         pins = "gpio43";
  299                                                         function = "normal";
  300                                                         bias-disable;
  301                                                         power-source = <PM8921_GPIO_S4>;
  302                                                 };
  303                                         };
  304 
  305                                         notify_led: nled-state {
  306                                                 pinconf {
  307                                                         pins = "gpio18";
  308                                                         function = "normal";
  309                                                         bias-disable;
  310                                                         power-source = <PM8921_GPIO_S4>;
  311                                                 };
  312                                         };
  313                                 };
  314                         };
  315                 };
  316 
  317                 amba {
  318                         /* eMMC */
  319                         sdcc1: mmc@12400000 {
  320                                 status = "okay";
  321                                 vmmc-supply = <&pm8921_l5>;
  322                                 vqmmc-supply = <&pm8921_s4>;
  323                         };
  324 
  325                         /* External micro SD card */
  326                         sdcc3: mmc@12180000 {
  327                                 status = "okay";
  328                                 vmmc-supply = <&pm8921_l6>;
  329                                 pinctrl-names = "default";
  330                                 pinctrl-0 = <&card_detect>;
  331                                 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
  332                         };
  333                         /* WLAN */
  334                         sdcc4: mmc@121c0000 {
  335                                 status = "okay";
  336                                 vmmc-supply = <&ext_3p3v>;
  337                                 vqmmc-supply = <&pm8921_lvs1>;
  338                                 mmc-pwrseq = <&sdcc4_pwrseq>;
  339                         };
  340                 };
  341 
  342                 hdmi-tx@4a00000 {
  343                         status = "okay";
  344 
  345                         core-vdda-supply = <&pm8921_hdmi_switch>;
  346 
  347                         hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
  348 
  349                         ports {
  350                                 port@0 {
  351                                         endpoint {
  352                                                 remote-endpoint = <&mdp_dtv_out>;
  353                                         };
  354                                 };
  355 
  356                                 port@1 {
  357                                         endpoint {
  358                                                 remote-endpoint = <&hdmi_con>;
  359                                         };
  360                                 };
  361                         };
  362                 };
  363 
  364                 hdmi-phy@4a00400 {
  365                         status = "okay";
  366 
  367                         core-vdda-supply = <&pm8921_hdmi_switch>;
  368                 };
  369 
  370                 mdp@5100000 {
  371                         status = "okay";
  372 
  373                         ports {
  374                                 port@3 {
  375                                         endpoint {
  376                                                 remote-endpoint = <&hdmi_in>;
  377                                         };
  378                                 };
  379                         };
  380                 };
  381         };
  382 };
Cache object: b250bce4ee424a109525c2953718d46a
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/qcom-apq8064-ifc6410.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/qcom-apq8064-ifc6410.dts
