qcom-ipq4018-jalapeno.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
    2 // Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
    3 
    4 #include "qcom-ipq4019.dtsi"
    5 #include <dt-bindings/gpio/gpio.h>
    6 #include <dt-bindings/input/input.h>
    7 
    8 / {
    9         model = "8devices Jalapeno";
   10         compatible = "8dev,jalapeno";
   11 };
   12 
   13 &tlmm {
   14         mdio_pins: mdio_pinmux {
   15                 pinmux_1 {
   16                         pins = "gpio53";
   17                         function = "mdio";
   18                 };
   19 
   20                 pinmux_2 {
   21                         pins = "gpio52";
   22                         function = "mdc";
   23                 };
   24 
   25                 pinconf {
   26                         pins = "gpio52", "gpio53";
   27                         bias-pull-up;
   28                 };
   29         };
   30 
   31         serial_pins: serial_pinmux {
   32                 mux {
   33                         pins = "gpio60", "gpio61";
   34                         function = "blsp_uart0";
   35                         bias-disable;
   36                 };
   37         };
   38 
   39         spi_0_pins: spi_0_pinmux {
   40                 pin {
   41                         function = "blsp_spi0";
   42                         pins = "gpio55", "gpio56", "gpio57";
   43                         drive-strength = <2>;
   44                         bias-disable;
   45                 };
   46 
   47                 pin_cs {
   48                         function = "gpio";
   49                         pins = "gpio54", "gpio59";
   50                         drive-strength = <2>;
   51                         bias-disable;
   52                         output-high;
   53                 };
   54         };
   55 };
   56 
   57 &watchdog {
   58         status = "okay";
   59 };
   60 
   61 &prng {
   62         status = "okay";
   63 };
   64 
   65 &blsp_dma {
   66         status = "okay";
   67 };
   68 
   69 &blsp1_spi1 {
   70         status = "okay";
   71 
   72         pinctrl-0 = <&spi_0_pins>;
   73         pinctrl-names = "default";
   74         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
   75 
   76         flash@0 {
   77                 status = "okay";
   78 
   79                 compatible = "jedec,spi-nor";
   80                 reg = <0>;
   81                 spi-max-frequency = <24000000>;
   82 
   83                 partitions {
   84                         compatible = "fixed-partitions";
   85                         #address-cells = <1>;
   86                         #size-cells = <1>;
   87 
   88                         partition@0 {
   89                                 label = "SBL1";
   90                                 reg = <0x00000000 0x00040000>;
   91                                 read-only;
   92                         };
   93 
   94                         partition@40000 {
   95                                 label = "MIBIB";
   96                                 reg = <0x00040000 0x00020000>;
   97                                 read-only;
   98                         };
   99 
  100                         partition@60000 {
  101                                 label = "QSEE";
  102                                 reg = <0x00060000 0x00060000>;
  103                                 read-only;
  104                         };
  105 
  106                         partition@c0000 {
  107                                 label = "CDT";
  108                                 reg = <0x000c0000 0x00010000>;
  109                                 read-only;
  110                         };
  111 
  112                         partition@d0000 {
  113                                 label = "DDRPARAMS";
  114                                 reg = <0x000d0000 0x00010000>;
  115                                 read-only;
  116                         };
  117 
  118                         partition@e0000 {
  119                                 label = "u-boot-env";
  120                                 reg = <0x000e0000 0x00010000>;
  121                         };
  122 
  123                         partition@f0000 {
  124                                 label = "u-boot";
  125                                 reg = <0x000f0000 0x00080000>;
  126                                 read-only;
  127                         };
  128 
  129                         partition@170000 {
  130                                 label = "ART";
  131                                 reg = <0x00170000 0x00010000>;
  132                                 read-only;
  133                         };
  134                 };
  135         };
  136 
  137         spi-nand@1 {
  138                 status = "okay";
  139 
  140                 compatible = "spi-nand";
  141                 reg = <1>;
  142                 spi-max-frequency = <24000000>;
  143 
  144                 partitions {
  145                         compatible = "fixed-partitions";
  146                         #address-cells = <1>;
  147                         #size-cells = <1>;
  148 
  149                         partition@0 {
  150                                 label = "ubi1";
  151                                 reg = <0x00000000 0x04000000>;
  152                         };
  153 
  154                         partition@4000000 {
  155                                 label = "ubi2";
  156                                 reg = <0x04000000 0x04000000>;
  157                         };
  158                 };
  159         };
  160 };
  161 
  162 &blsp1_uart1 {
  163         status = "okay";
  164 
  165         pinctrl-0 = <&serial_pins>;
  166         pinctrl-names = "default";
  167 };
  168 
  169 &cryptobam {
  170         status = "okay";
  171 };
  172 
  173 &crypto {
  174         status = "okay";
  175 };
  176 
  177 &mdio {
  178         status = "okay";
  179 
  180         pinctrl-0 = <&mdio_pins>;
  181         pinctrl-names = "default";
  182 };
  183 
  184 &wifi0 {
  185         status = "okay";
  186 
  187         qcom,ath10k-calibration-variant = "8devices-Jalapeno";
  188 };
  189 
  190 &wifi1 {
  191         status = "okay";
  192 
  193         qcom,ath10k-calibration-variant = "8devices-Jalapeno";
  194 };
  195 
  196 &usb3_ss_phy {
  197         status = "okay";
  198 };
  199 
  200 &usb3_hs_phy {
  201         status = "okay";
  202 };
  203 
  204 &usb3 {
  205         status = "okay";
  206 };
  207 
  208 &usb2_hs_phy {
  209         status = "okay";
  210 };
  211 
  212 &usb2 {
  213         status = "okay";
  214 };

Cache object: 991fde5e3b216cd1918b4687489d1ec8

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/qcom-ipq4018-jalapeno.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/qcom-ipq4018-jalapeno.dts