qcom-ipq8064-rb3011.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 #include "qcom-ipq8064.dtsi"
    3 #include <dt-bindings/input/input.h>
    4 #include <dt-bindings/leds/common.h>
    5 
    6 / {
    7         model = "MikroTik RB3011UiAS-RM";
    8         compatible = "mikrotik,rb3011";
    9 
   10         aliases {
   11                 serial0 = &gsbi7_serial;
   12                 ethernet0 = &gmac0;
   13                 ethernet1 = &gmac3;
   14                 mdio-gpio0 = &mdio0;
   15                 mdio-gpio1 = &mdio1;
   16         };
   17 
   18         chosen {
   19                 bootargs = "loglevel=8 console=ttyMSM0,115200";
   20                 stdout-path = "serial0:115200n8";
   21         };
   22 
   23         memory@42000000 {
   24                 reg = <0x42000000 0x3e000000>;
   25                 device_type = "memory";
   26         };
   27 
   28         mdio0: mdio-0 {
   29                 status = "okay";
   30                 compatible = "virtual,mdio-gpio";
   31                 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
   32                         <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
   33                 #address-cells = <1>;
   34                 #size-cells = <0>;
   35 
   36                 pinctrl-0 = <&mdio0_pins>;
   37                 pinctrl-names = "default";
   38 
   39                 switch0: switch@10 {
   40                         compatible = "qca,qca8337";
   41                         #address-cells = <1>;
   42                         #size-cells = <0>;
   43 
   44                         dsa,member = <0 0>;
   45 
   46                         pinctrl-0 = <&sw0_reset_pin>;
   47                         pinctrl-names = "default";
   48 
   49                         reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
   50                         reg = <0x10>;
   51 
   52                         ports {
   53                                 #address-cells = <1>;
   54                                 #size-cells = <0>;
   55 
   56                                 switch0cpu: port@0 {
   57                                         reg = <0>;
   58                                         label = "cpu";
   59                                         ethernet = <&gmac0>;
   60                                         phy-mode = "rgmii-id";
   61                                         fixed-link {
   62                                                 speed = <1000>;
   63                                                 full-duplex;
   64                                         };
   65                                 };
   66 
   67                                 port@1 {
   68                                         reg = <1>;
   69                                         label = "sw1";
   70                                 };
   71 
   72                                 port@2 {
   73                                         reg = <2>;
   74                                         label = "sw2";
   75                                 };
   76 
   77                                 port@3 {
   78                                         reg = <3>;
   79                                         label = "sw3";
   80                                 };
   81 
   82                                 port@4 {
   83                                         reg = <4>;
   84                                         label = "sw4";
   85                                 };
   86 
   87                                 port@5 {
   88                                         reg = <5>;
   89                                         label = "sw5";
   90                                 };
   91                         };
   92                 };
   93         };
   94 
   95         mdio1: mdio-1 {
   96                 status = "okay";
   97                 compatible = "virtual,mdio-gpio";
   98                 gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
   99                         <&qcom_pinmux 10 GPIO_ACTIVE_HIGH>;
  100                 #address-cells = <1>;
  101                 #size-cells = <0>;
  102 
  103                 pinctrl-0 = <&mdio1_pins>;
  104                 pinctrl-names = "default";
  105 
  106                 switch1: switch@14 {
  107                         compatible = "qca,qca8337";
  108                         #address-cells = <1>;
  109                         #size-cells = <0>;
  110 
  111                         dsa,member = <1 0>;
  112 
  113                         pinctrl-0 = <&sw1_reset_pin>;
  114                         pinctrl-names = "default";
  115 
  116                         reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
  117                         reg = <0x10>;
  118 
  119                         ports {
  120                                 #address-cells = <1>;
  121                                 #size-cells = <0>;
  122 
  123                                 switch1cpu: port@0 {
  124                                         reg = <0>;
  125                                         label = "cpu";
  126                                         ethernet = <&gmac3>;
  127                                         phy-mode = "sgmii";
  128                                         fixed-link {
  129                                                 speed = <1000>;
  130                                                 full-duplex;
  131                                         };
  132                                 };
  133 
  134                                 port@1 {
  135                                         reg = <1>;
  136                                         label = "sw6";
  137                                 };
  138 
  139                                 port@2 {
  140                                         reg = <2>;
  141                                         label = "sw7";
  142                                 };
  143 
  144                                 port@3 {
  145                                         reg = <3>;
  146                                         label = "sw8";
  147                                 };
  148 
  149                                 port@4 {
  150                                         reg = <4>;
  151                                         label = "sw9";
  152                                 };
  153 
  154                                 port@5 {
  155                                         reg = <5>;
  156                                         label = "sw10";
  157                                 };
  158                         };
  159                 };
  160         };
  161 
  162         soc {
  163                 gsbi5: gsbi@1a200000 {
  164                         qcom,mode = <GSBI_PROT_SPI>;
  165                         status = "okay";
  166 
  167                         spi4: spi@1a280000 {
  168                                 status = "okay";
  169                                 spi-max-frequency = <50000000>;
  170 
  171                                 pinctrl-0 = <&spi_pins>;
  172                                 pinctrl-names = "default";
  173 
  174                                 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
  175 
  176                                 norflash: flash@0 {
  177                                         compatible = "jedec,spi-nor";
  178                                         #address-cells = <1>;
  179                                         #size-cells = <1>;
  180                                         spi-max-frequency = <50000000>;
  181                                         reg = <0>;
  182 
  183                                         partition@0 {
  184                                                 label = "RouterBoot";
  185                                                 reg = <0x0 0x40000>;
  186                                         };
  187                                 };
  188                         };
  189                 };
  190 
  191                 gpio-keys {
  192                         compatible = "gpio-keys";
  193                         pinctrl-0 = <&buttons_pins>;
  194                         pinctrl-names = "default";
  195 
  196                         button {
  197                                 label = "reset";
  198                                 linux,code = <KEY_RESTART>;
  199                                 gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
  200                                 linux,input-type = <1>;
  201                                 debounce-interval = <60>;
  202                         };
  203                 };
  204 
  205                 leds {
  206                         compatible = "gpio-leds";
  207                         pinctrl-0 = <&leds_pins>;
  208                         pinctrl-names = "default";
  209 
  210                         led@7 {
  211                                 label = "rb3011:green:user";
  212                                 color = <LED_COLOR_ID_GREEN>;
  213                                 gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
  214                                 default-state = "off";
  215                         };
  216                 };
  217 
  218         };
  219 };
  220 
  221 &adm_dma {
  222         status = "okay";
  223 };
  224 
  225 &gmac0 {
  226         status = "okay";
  227 
  228         phy-mode = "rgmii";
  229         qcom,id = <0>;
  230         phy-handle = <&switch0cpu>;
  231 
  232         fixed-link {
  233                 speed = <1000>;
  234                 full-duplex;
  235         };
  236 };
  237 
  238 &gmac3 {
  239         status = "okay";
  240 
  241         phy-mode = "sgmii";
  242         qcom,id = <3>;
  243         phy-handle = <&switch1cpu>;
  244 
  245         fixed-link {
  246                 speed = <1000>;
  247                 full-duplex;
  248         };
  249 };
  250 
  251 &gsbi7 {
  252         status = "okay";
  253         qcom,mode = <GSBI_PROT_I2C_UART>;
  254 };
  255 
  256 &gsbi7_serial {
  257         status = "okay";
  258 };
  259 
  260 &hs_phy_1 {
  261         status = "okay";
  262 };
  263 
  264 &nand {
  265         status = "okay";
  266 
  267         nandcs@0 {
  268                 compatible = "qcom,nandcs";
  269                 reg = <0>;
  270 
  271                 nand-ecc-strength = <4>;
  272                 nand-bus-width = <8>;
  273                 nand-ecc-step-size = <512>;
  274 
  275                 partitions {
  276                         compatible = "fixed-partitions";
  277                         #address-cells = <1>;
  278                         #size-cells = <1>;
  279 
  280                         boot@0 {
  281                                 label = "RouterBoard NAND 1 Boot";
  282                                 reg = <0x0000000 0x0800000>;
  283                         };
  284 
  285                         main@800000 {
  286                                 label = "RouterBoard NAND 1 Main";
  287                                 reg = <0x0800000 0x7800000>;
  288                         };
  289                 };
  290         };
  291 };
  292 
  293 &qcom_pinmux {
  294         buttons_pins: buttons_pins {
  295                 mux {
  296                         pins = "gpio66";
  297                         drive-strength = <16>;
  298                         bias-disable;
  299                 };
  300         };
  301 
  302         leds_pins: leds_pins {
  303                 mux {
  304                         pins = "gpio33";
  305                         drive-strength = <16>;
  306                         bias-disable;
  307                 };
  308         };
  309 
  310         mdio1_pins: mdio1_pins {
  311                 mux {
  312                         pins = "gpio10", "gpio11";
  313                         function = "gpio";
  314                         drive-strength = <8>;
  315                         bias-disable;
  316                 };
  317         };
  318 
  319         sw0_reset_pin: sw0_reset_pin {
  320                 mux {
  321                         pins = "gpio16";
  322                         drive-strength = <16>;
  323                         function = "gpio";
  324                         bias-disable;
  325                         input-disable;
  326                 };
  327         };
  328 
  329         sw1_reset_pin: sw1_reset_pin {
  330                 mux {
  331                         pins = "gpio17";
  332                         drive-strength = <16>;
  333                         function = "gpio";
  334                         bias-disable;
  335                         input-disable;
  336                 };
  337         };
  338 
  339         usb1_pwr_en_pins: usb1_pwr_en_pins {
  340                 mux {
  341                         pins = "gpio4";
  342                         function = "gpio";
  343                         drive-strength = <16>;
  344                         bias-disable;
  345                         output-high;
  346                 };
  347         };
  348 };
  349 
  350 &ss_phy_1 {
  351         status = "okay";
  352 };
  353 
  354 &usb3_1 {
  355         pinctrl-0 = <&usb1_pwr_en_pins>;
  356         pinctrl-names = "default";
  357 
  358         status = "okay";
  359 };
Cache object: b8e5cba0591e21e201112edeecceb0f2
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/qcom-ipq8064-rb3011.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/qcom-ipq8064-rb3011.dts
