qcom-pm8226.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: BSD-3-Clause
    2 #include <dt-bindings/interrupt-controller/irq.h>
    3 #include <dt-bindings/spmi/spmi.h>
    4 #include <dt-bindings/iio/qcom,spmi-vadc.h>
    5 
    6 &spmi_bus {
    7         pm8226_0: pm8226@0 {
    8                 compatible = "qcom,pm8226", "qcom,spmi-pmic";
    9                 reg = <0x0 SPMI_USID>;
   10                 #address-cells = <1>;
   11                 #size-cells = <0>;
   12 
   13                 pwrkey@800 {
   14                         compatible = "qcom,pm8941-pwrkey";
   15                         reg = <0x800>;
   16                         interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
   17                         debounce = <15625>;
   18                         bias-pull-up;
   19                 };
   20 
   21                 smbb: charger@1000 {
   22                         compatible = "qcom,pm8226-charger";
   23                         reg = <0x1000>;
   24                         interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
   25                                      <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
   26                                      <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
   27                                      <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
   28                                      <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
   29                                      <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
   30                                      <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
   31                                      <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
   32                         interrupt-names = "chg-done",
   33                                           "chg-fast",
   34                                           "chg-trkl",
   35                                           "bat-temp-ok",
   36                                           "bat-present",
   37                                           "chg-gone",
   38                                           "usb-valid",
   39                                           "dc-valid";
   40 
   41                         chg_otg: otg-vbus { };
   42                 };
   43 
   44                 rtc@6000 {
   45                         compatible = "qcom,pm8941-rtc";
   46                         reg = <0x6000>, <0x6100>;
   47                         reg-names = "rtc", "alarm";
   48                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
   49                 };
   50 
   51                 pm8226_vadc: adc@3100 {
   52                         compatible = "qcom,spmi-vadc";
   53                         reg = <0x3100>;
   54                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
   55                         #address-cells = <1>;
   56                         #size-cells = <0>;
   57                         #io-channel-cells = <1>;
   58 
   59                         adc-chan@7 {
   60                                 reg = <VADC_VSYS>;
   61                                 qcom,pre-scaling = <1 3>;
   62                                 label = "vph_pwr";
   63                         };
   64                         adc-chan@8 {
   65                                 reg = <VADC_DIE_TEMP>;
   66                                 label = "die_temp";
   67                         };
   68                         adc-chan@9 {
   69                                 reg = <VADC_REF_625MV>;
   70                                 label = "ref_625mv";
   71                         };
   72                         adc-chan@a {
   73                                 reg = <VADC_REF_1250MV>;
   74                                 label = "ref_1250mv";
   75                         };
   76                         adc-chan@e {
   77                                 reg = <VADC_GND_REF>;
   78                         };
   79                         adc-chan@f {
   80                                 reg = <VADC_VDD_VADC>;
   81                         };
   82                 };
   83 
   84                 pm8226_mpps: mpps@a000 {
   85                         compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
   86                         reg = <0xa000>;
   87                         gpio-controller;
   88                         #gpio-cells = <2>;
   89                         gpio-ranges = <&pm8226_mpps 0 0 8>;
   90                         interrupt-controller;
   91                         #interrupt-cells = <2>;
   92                 };
   93         };
   94 
   95         pm8226_1: pm8226@1 {
   96                 compatible = "qcom,pm8226", "qcom,spmi-pmic";
   97                 reg = <0x1 SPMI_USID>;
   98                 #address-cells = <1>;
   99                 #size-cells = <0>;
  100 
  101                 pm8226_spmi_regulators: pm8226-regulators {
  102                         compatible = "qcom,pm8226-regulators";
  103                 };
  104 
  105                 pm8226_vib: vibrator@c000 {
  106                         compatible = "qcom,pm8916-vib";
  107                         reg = <0xc000>;
  108                         status = "disabled";
  109                 };
  110         };
  111 };

Cache object: 4aa7263f5b3205d4401af704ad7c99fc

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/qcom-pm8226.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/qcom-pm8226.dtsi