r8a73a4-ape6evm.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Device Tree Source for the APE6EVM board
    4  *
    5  * Copyright (C) 2013 Renesas Solutions Corp.
    6  */
    7 
    8 /dts-v1/;
    9 #include "r8a73a4.dtsi"
   10 #include <dt-bindings/gpio/gpio.h>
   11 #include <dt-bindings/input/input.h>
   12 
   13 / {
   14         model = "APE6EVM";
   15         compatible = "renesas,ape6evm", "renesas,r8a73a4";
   16 
   17         aliases {
   18                 serial0 = &scifa0;
   19         };
   20 
   21         chosen {
   22                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
   23                 stdout-path = "serial0:115200n8";
   24         };
   25 
   26         memory@40000000 {
   27                 device_type = "memory";
   28                 reg = <0 0x40000000 0 0x40000000>;
   29         };
   30 
   31         memory@200000000 {
   32                 device_type = "memory";
   33                 reg = <2 0x00000000 0 0x40000000>;
   34         };
   35 
   36         vcc_mmc0: regulator-mmc0 {
   37                 compatible = "regulator-fixed";
   38                 regulator-name = "MMC0 Vcc";
   39                 regulator-min-microvolt = <2800000>;
   40                 regulator-max-microvolt = <2800000>;
   41                 regulator-always-on;
   42         };
   43 
   44         vcc_sdhi0: regulator-sdhi0 {
   45                 compatible = "regulator-fixed";
   46 
   47                 regulator-name = "SDHI0 Vcc";
   48                 regulator-min-microvolt = <3300000>;
   49                 regulator-max-microvolt = <3300000>;
   50 
   51                 gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
   52                 enable-active-high;
   53         };
   54 
   55         /* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
   56         ape6evm_fixed_1v8: regulator-1v8 {
   57                 compatible = "regulator-fixed";
   58                 regulator-name = "1V8";
   59                 regulator-min-microvolt = <1800000>;
   60                 regulator-max-microvolt = <1800000>;
   61                 regulator-always-on;
   62         };
   63 
   64         ape6evm_fixed_3v3: regulator-3v3 {
   65                 compatible = "regulator-fixed";
   66                 regulator-name = "3V3";
   67                 regulator-min-microvolt = <3300000>;
   68                 regulator-max-microvolt = <3300000>;
   69                 regulator-always-on;
   70         };
   71 
   72         leds {
   73                 compatible = "gpio-leds";
   74                 led1 {
   75                         gpios = <&pfc 28 GPIO_ACTIVE_HIGH>;
   76                         label = "GNSS_EN";
   77                 };
   78                 led2 {
   79                         gpios = <&pfc 126 GPIO_ACTIVE_HIGH>;
   80                         label = "NFC_NRST";
   81                 };
   82                 led3 {
   83                         gpios = <&pfc 132 GPIO_ACTIVE_HIGH>;
   84                         label = "GNSS_NRST";
   85                 };
   86                 led4 {
   87                         gpios = <&pfc 232 GPIO_ACTIVE_HIGH>;
   88                         label = "BT_WAKEUP";
   89                 };
   90                 led5 {
   91                         gpios = <&pfc 250 GPIO_ACTIVE_HIGH>;
   92                         label = "STROBE";
   93                 };
   94                 led6 {
   95                         gpios = <&pfc 288 GPIO_ACTIVE_HIGH>;
   96                         label = "BBRESETOUT";
   97                 };
   98         };
   99 
  100         keyboard {
  101                 compatible = "gpio-keys";
  102 
  103                 pinctrl-names = "default";
  104                 pinctrl-0 = <&keyboard_pins>;
  105 
  106                 zero-key {
  107                         gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
  108                         linux,code = <KEY_0>;
  109                         label = "S16";
  110                         wakeup-source;
  111                 };
  112 
  113                 menu-key {
  114                         gpios = <&pfc 325 GPIO_ACTIVE_LOW>;
  115                         linux,code = <KEY_MENU>;
  116                         label = "S17";
  117                 };
  118 
  119                 home-key {
  120                         gpios = <&pfc 326 GPIO_ACTIVE_LOW>;
  121                         linux,code = <KEY_HOME>;
  122                         label = "S18";
  123                 };
  124 
  125                 back-key {
  126                         gpios = <&pfc 327 GPIO_ACTIVE_LOW>;
  127                         linux,code = <KEY_BACK>;
  128                         label = "S19";
  129                 };
  130 
  131                 volup-key {
  132                         gpios = <&pfc 328 GPIO_ACTIVE_LOW>;
  133                         linux,code = <KEY_VOLUMEUP>;
  134                         label = "S20";
  135                 };
  136 
  137                 voldown-key {
  138                         gpios = <&pfc 329 GPIO_ACTIVE_LOW>;
  139                         linux,code = <KEY_VOLUMEDOWN>;
  140                         label = "S21";
  141                 };
  142         };
  143 };
  144 
  145 &i2c5 {
  146         status = "okay";
  147         vdd_dvfs: regulator@1b {
  148                 compatible = "maxim,max8973";
  149                 reg = <0x1b>;
  150 
  151                 regulator-min-microvolt = <935000>;
  152                 regulator-max-microvolt = <1200000>;
  153                 regulator-boot-on;
  154                 regulator-always-on;
  155         };
  156 };
  157 
  158 &cpu0 {
  159         cpu0-supply = <&vdd_dvfs>;
  160         operating-points = <1950000 1115000>,   /* kHz  uV */
  161                            <1462500  995000>;
  162         voltage-tolerance = <1>; /* 1% */
  163 };
  164 
  165 &bsc {
  166         flash@0 {
  167                 compatible = "cfi-flash", "mtd-rom";
  168                 reg = <0x0 0x08000000>;
  169                 bank-width = <2>;
  170 
  171                 partitions {
  172                         compatible = "fixed-partitions";
  173                         #address-cells = <1>;
  174                         #size-cells = <1>;
  175 
  176                         partition@0 {
  177                                 label = "uboot";
  178                                 reg = <0x00000000 0x00040000>;
  179                                 read-only;
  180                         };
  181                         partition@40000 {
  182                                 label = "uboot-env";
  183                                 reg = <0x00040000 0x00040000>;
  184                                 read-only;
  185                         };
  186                         partition@80000 {
  187                                 label = "flash";
  188                                 reg = <0x00080000 0x07f80000>;
  189                         };
  190                 };
  191         };
  192 
  193         ethernet@8000000 {
  194                 compatible = "smsc,lan9220", "smsc,lan9115";
  195                 reg = <0x08000000 0x1000>;
  196                 interrupt-parent = <&irqc1>;
  197                 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
  198                 phy-mode = "mii";
  199                 reg-io-width = <4>;
  200                 smsc,irq-active-high;
  201                 smsc,irq-push-pull;
  202                 reset-gpios = <&pfc 270 GPIO_ACTIVE_LOW>;
  203                 vdd33a-supply = <&ape6evm_fixed_3v3>;
  204                 vddvario-supply = <&ape6evm_fixed_1v8>;
  205         };
  206 };
  207 
  208 &cmt1 {
  209         status = "okay";
  210 };
  211 
  212 &pfc {
  213         scifa0_pins: scifa0 {
  214                 groups = "scifa0_data";
  215                 function = "scifa0";
  216         };
  217 
  218         mmc0_pins: mmc0 {
  219                 groups = "mmc0_data8", "mmc0_ctrl";
  220                 function = "mmc0";
  221         };
  222 
  223         sdhi0_pins: sd0 {
  224                 groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
  225                 function = "sdhi0";
  226         };
  227 
  228         sdhi1_pins: sd1 {
  229                 groups = "sdhi1_data4", "sdhi1_ctrl";
  230                 function = "sdhi1";
  231         };
  232 
  233         keyboard_pins: keyboard {
  234                 pins = "PORT324", "PORT325", "PORT326", "PORT327", "PORT328",
  235                        "PORT329";
  236                 bias-pull-up;
  237         };
  238 };
  239 
  240 &mmcif0 {
  241         vmmc-supply = <&vcc_mmc0>;
  242         bus-width = <8>;
  243         non-removable;
  244         pinctrl-names = "default";
  245         pinctrl-0 = <&mmc0_pins>;
  246         status = "okay";
  247 };
  248 
  249 &scifa0 {
  250         pinctrl-0 = <&scifa0_pins>;
  251         pinctrl-names = "default";
  252 
  253         status = "okay";
  254 };
  255 
  256 &sdhi0 {
  257         vmmc-supply = <&vcc_sdhi0>;
  258         bus-width = <4>;
  259         disable-wp;
  260         pinctrl-names = "default";
  261         pinctrl-0 = <&sdhi0_pins>;
  262         status = "okay";
  263 };
  264 
  265 &sdhi1 {
  266         vmmc-supply = <&ape6evm_fixed_3v3>;
  267         bus-width = <4>;
  268         broken-cd;
  269         disable-wp;
  270         pinctrl-names = "default";
  271         pinctrl-0 = <&sdhi1_pins>;
  272         status = "okay";
  273 };

Cache object: d332b23859adacf0ba9a12861d1e5a74

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/r8a73a4-ape6evm.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/r8a73a4-ape6evm.dts