r8a7790-stout.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Device Tree Source for the Stout board
    4  *
    5  * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
    6  */
    7 
    8 /dts-v1/;
    9 #include "r8a7790.dtsi"
   10 #include <dt-bindings/gpio/gpio.h>
   11 #include <dt-bindings/input/input.h>
   12 
   13 / {
   14         model = "Stout";
   15         compatible = "renesas,stout", "renesas,r8a7790";
   16 
   17         aliases {
   18                 serial0 = &scifa0;
   19         };
   20 
   21         chosen {
   22                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
   23                 stdout-path = "serial0:115200n8";
   24         };
   25 
   26         memory@40000000 {
   27                 device_type = "memory";
   28                 reg = <0 0x40000000 0 0x40000000>;
   29         };
   30 
   31         leds {
   32                 compatible = "gpio-leds";
   33                 led1 {
   34                         gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
   35                 };
   36                 led2 {
   37                         gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
   38                 };
   39                 led3 {
   40                         gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
   41                 };
   42                 led5 {
   43                         gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
   44                 };
   45         };
   46 
   47         fixedregulator3v3: regulator-3v3 {
   48                 compatible = "regulator-fixed";
   49                 regulator-name = "fixed-3.3V";
   50                 regulator-min-microvolt = <3300000>;
   51                 regulator-max-microvolt = <3300000>;
   52                 regulator-boot-on;
   53                 regulator-always-on;
   54         };
   55 
   56         vcc_sdhi0: regulator-vcc-sdhi0 {
   57                 compatible = "regulator-fixed";
   58 
   59                 regulator-name = "SDHI0 Vcc";
   60                 regulator-min-microvolt = <3300000>;
   61                 regulator-max-microvolt = <3300000>;
   62 
   63                 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
   64                 enable-active-high;
   65         };
   66 
   67         hdmi-out {
   68                 compatible = "hdmi-connector";
   69                 type = "a";
   70 
   71                 port {
   72                         hdmi_con_out: endpoint {
   73                                 remote-endpoint = <&adv7511_out>;
   74                         };
   75                 };
   76         };
   77 
   78         osc1_clk: osc1-clock {
   79                 compatible = "fixed-clock";
   80                 #clock-cells = <0>;
   81                 clock-frequency = <148500000>;
   82         };
   83 
   84         osc4_clk: osc4-clock {
   85                 compatible = "fixed-clock";
   86                 #clock-cells = <0>;
   87                 clock-frequency = <12000000>;
   88         };
   89 };
   90 
   91 &du {
   92         pinctrl-0 = <&du_pins>;
   93         pinctrl-names = "default";
   94         status = "okay";
   95 
   96         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
   97                  <&osc1_clk>;
   98         clock-names = "du.0", "du.1", "du.2", "dclkin.0";
   99 
  100         ports {
  101                 port@0 {
  102                         endpoint {
  103                                 remote-endpoint = <&adv7511_in>;
  104                         };
  105                 };
  106         };
  107 };
  108 
  109 &lvds0 {
  110         ports {
  111                 port@1 {
  112                         lvds_connector0: endpoint {
  113                         };
  114                 };
  115         };
  116 };
  117 
  118 &lvds1 {
  119         ports {
  120                 port@1 {
  121                         lvds_connector1: endpoint {
  122                         };
  123                 };
  124         };
  125 };
  126 
  127 &extal_clk {
  128         clock-frequency = <20000000>;
  129 };
  130 
  131 &pfc {
  132 
  133         pinctrl-0 = <&scif_clk_pins>;
  134         pinctrl-names = "default";
  135 
  136         du_pins: du {
  137                 groups = "du_rgb888", "du_sync_1", "du_clk_out_0";
  138                 function = "du";
  139         };
  140 
  141         scifa0_pins: scifa0 {
  142                 groups = "scifa0_data_b";
  143                 function = "scifa0";
  144         };
  145 
  146         scif_clk_pins: scif_clk {
  147                 groups = "scif_clk";
  148                 function = "scif_clk";
  149         };
  150 
  151         ether_pins: ether {
  152                 groups = "eth_link", "eth_mdio", "eth_rmii";
  153                 function = "eth";
  154         };
  155 
  156         phy1_pins: phy1 {
  157                 groups = "intc_irq1";
  158                 function = "intc";
  159         };
  160 
  161         sdhi0_pins: sd0 {
  162                 groups = "sdhi0_data4", "sdhi0_ctrl";
  163                 function = "sdhi0";
  164                 power-source = <3300>;
  165         };
  166 
  167         qspi_pins: qspi {
  168                 groups = "qspi_ctrl", "qspi_data4";
  169                 function = "qspi";
  170         };
  171 
  172         iic2_pins: iic2 {
  173                 groups = "iic2_b";
  174                 function = "iic2";
  175         };
  176 
  177         iic3_pins: iic3 {
  178                 groups = "iic3";
  179                 function = "iic3";
  180         };
  181 
  182         pmic_irq_pins: pmicirq {
  183                 groups = "intc_irq2";
  184                 function = "intc";
  185         };
  186 
  187         usb0_pins: usb0 {
  188                 groups = "usb0";
  189                 function = "usb0";
  190         };
  191 };
  192 
  193 &ether {
  194         pinctrl-0 = <&ether_pins>, <&phy1_pins>;
  195         pinctrl-names = "default";
  196 
  197         phy-handle = <&phy1>;
  198         renesas,ether-link-active-low;
  199         status = "okay";
  200 
  201         phy1: ethernet-phy@1 {
  202                 compatible = "ethernet-phy-id0022.1537",
  203                              "ethernet-phy-ieee802.3-c22";
  204                 reg = <1>;
  205                 interrupt-parent = <&irqc0>;
  206                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
  207                 micrel,led-mode = <1>;
  208                 reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
  209         };
  210 };
  211 
  212 &cmt0 {
  213         status = "okay";
  214 };
  215 
  216 &qspi {
  217         pinctrl-0 = <&qspi_pins>;
  218         pinctrl-names = "default";
  219 
  220         status = "okay";
  221 
  222         flash: flash@0 {
  223                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
  224                 reg = <0>;
  225                 spi-max-frequency = <30000000>;
  226                 spi-tx-bus-width = <4>;
  227                 spi-rx-bus-width = <4>;
  228                 spi-cpha;
  229                 spi-cpol;
  230                 m25p,fast-read;
  231 
  232                 partitions {
  233                         compatible = "fixed-partitions";
  234                         #address-cells = <1>;
  235                         #size-cells = <1>;
  236 
  237                         partition@0 {
  238                                 label = "loader";
  239                                 reg = <0x00000000 0x00080000>;
  240                                 read-only;
  241                         };
  242                         partition@80000 {
  243                                 label = "uboot";
  244                                 reg = <0x00080000 0x00040000>;
  245                                 read-only;
  246                         };
  247                         partition@c0000 {
  248                                 label = "uboot-env";
  249                                 reg = <0x000c0000 0x00040000>;
  250                                 read-only;
  251                         };
  252                         partition@100000 {
  253                                 label = "flash";
  254                                 reg = <0x00100000 0x03f00000>;
  255                         };
  256                 };
  257         };
  258 };
  259 
  260 &scifa0 {
  261         pinctrl-0 = <&scifa0_pins>;
  262         pinctrl-names = "default";
  263 
  264         status = "okay";
  265 };
  266 
  267 &scif_clk {
  268         clock-frequency = <14745600>;
  269 };
  270 
  271 &sdhi0 {
  272         pinctrl-0 = <&sdhi0_pins>;
  273         pinctrl-names = "default";
  274 
  275         vmmc-supply = <&vcc_sdhi0>;
  276         cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
  277         status = "okay";
  278 };
  279 
  280 &cpu0 {
  281         cpu0-supply = <&vdd_dvfs>;
  282 };
  283 
  284 &iic2   {
  285         status = "okay";
  286         pinctrl-0 = <&iic2_pins>;
  287         pinctrl-names = "default";
  288 
  289         clock-frequency = <100000>;
  290 
  291         hdmi@39 {
  292                 compatible = "adi,adv7511w";
  293                 reg = <0x39>;
  294                 interrupt-parent = <&gpio1>;
  295                 interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
  296                 clocks = <&osc4_clk>;
  297                 clock-names = "cec";
  298 
  299                 adi,input-depth = <8>;
  300                 adi,input-colorspace = "rgb";
  301                 adi,input-clock = "1x";
  302 
  303                 ports {
  304                         #address-cells = <1>;
  305                         #size-cells = <0>;
  306 
  307                         port@0 {
  308                                 reg = <0>;
  309                                 adv7511_in: endpoint {
  310                                         remote-endpoint = <&du_out_rgb>;
  311                                 };
  312                         };
  313 
  314                         port@1 {
  315                                 reg = <1>;
  316                                 adv7511_out: endpoint {
  317                                         remote-endpoint = <&hdmi_con_out>;
  318                                 };
  319                         };
  320                 };
  321         };
  322 };
  323 
  324 &iic3 {
  325         pinctrl-names = "default";
  326         pinctrl-0 = <&iic3_pins>, <&pmic_irq_pins>;
  327         status = "okay";
  328 
  329         pmic@58 {
  330                 compatible = "dlg,da9063";
  331                 reg = <0x58>;
  332                 interrupt-parent = <&irqc0>;
  333                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
  334                 interrupt-controller;
  335 
  336                 onkey {
  337                         compatible = "dlg,da9063-onkey";
  338                 };
  339 
  340                 rtc {
  341                         compatible = "dlg,da9063-rtc";
  342                 };
  343 
  344                 watchdog {
  345                         compatible = "dlg,da9063-watchdog";
  346                 };
  347         };
  348 
  349         vdd_dvfs: regulator@68 {
  350                 compatible = "dlg,da9210";
  351                 reg = <0x68>;
  352                 interrupt-parent = <&irqc0>;
  353                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
  354 
  355                 regulator-min-microvolt = <1000000>;
  356                 regulator-max-microvolt = <1000000>;
  357                 regulator-boot-on;
  358                 regulator-always-on;
  359         };
  360 
  361         vdd: regulator@70 {
  362                 compatible = "dlg,da9210";
  363                 reg = <0x70>;
  364                 interrupt-parent = <&irqc0>;
  365                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
  366 
  367                 regulator-min-microvolt = <1000000>;
  368                 regulator-max-microvolt = <1000000>;
  369                 regulator-boot-on;
  370                 regulator-always-on;
  371         };
  372 };
  373 
  374 &pci0 {
  375         status = "okay";
  376         pinctrl-0 = <&usb0_pins>;
  377         pinctrl-names = "default";
  378 };
  379 
  380 &usbphy {
  381         status = "okay";
  382 };
Cache object: 592cc36679c4839ad87e4bbcbeb4e4eb
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/r8a7790-stout.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/r8a7790-stout.dts
