r8a7791-koelsch.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Device Tree Source for the Koelsch board
    4  *
    5  * Copyright (C) 2013 Renesas Electronics Corporation
    6  * Copyright (C) 2013-2014 Renesas Solutions Corp.
    7  * Copyright (C) 2014 Cogent Embedded, Inc.
    8  */
    9 
   10 /*
   11  * SSI-AK4643
   12  *
   13  * SW1: 1: AK4643
   14  *      2: CN22
   15  *      3: ADV7511
   16  *
   17  * This command is required when Playback/Capture
   18  *
   19  *      amixer set "LINEOUT Mixer DACL" on
   20  *      amixer set "DVC Out" 100%
   21  *      amixer set "DVC In" 100%
   22  *
   23  * You can use Mute
   24  *
   25  *      amixer set "DVC Out Mute" on
   26  *      amixer set "DVC In Mute" on
   27  *
   28  * You can use Volume Ramp
   29  *
   30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
   31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
   32  *      amixer set "DVC Out Ramp" on
   33  *      aplay xxx.wav &
   34  *      amixer set "DVC Out"  80%  // Volume Down
   35  *      amixer set "DVC Out" 100%  // Volume Up
   36  */
   37 
   38 /dts-v1/;
   39 #include "r8a7791.dtsi"
   40 #include <dt-bindings/gpio/gpio.h>
   41 #include <dt-bindings/input/input.h>
   42 
   43 / {
   44         model = "Koelsch";
   45         compatible = "renesas,koelsch", "renesas,r8a7791";
   46 
   47         aliases {
   48                 serial0 = &scif0;
   49                 serial1 = &scif1;
   50                 i2c9 = &gpioi2c1;
   51                 i2c10 = &gpioi2c2;
   52                 i2c11 = &gpioi2c4;
   53                 i2c12 = &i2cexio1;
   54                 i2c13 = &i2chdmi;
   55                 i2c14 = &i2cexio4;
   56                 mmc0 = &sdhi0;
   57                 mmc1 = &sdhi1;
   58                 mmc2 = &sdhi2;
   59         };
   60 
   61         chosen {
   62                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
   63                 stdout-path = "serial0:115200n8";
   64         };
   65 
   66         memory@40000000 {
   67                 device_type = "memory";
   68                 reg = <0 0x40000000 0 0x40000000>;
   69         };
   70 
   71         memory@200000000 {
   72                 device_type = "memory";
   73                 reg = <2 0x00000000 0 0x40000000>;
   74         };
   75 
   76         lbsc {
   77                 #address-cells = <1>;
   78                 #size-cells = <1>;
   79         };
   80 
   81         keyboard {
   82                 compatible = "gpio-keys";
   83 
   84                 pinctrl-0 = <&keyboard_pins>;
   85                 pinctrl-names = "default";
   86 
   87                 key-1 {
   88                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
   89                         linux,code = <KEY_1>;
   90                         label = "SW2-1";
   91                         wakeup-source;
   92                         debounce-interval = <20>;
   93                 };
   94                 key-2 {
   95                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
   96                         linux,code = <KEY_2>;
   97                         label = "SW2-2";
   98                         wakeup-source;
   99                         debounce-interval = <20>;
  100                 };
  101                 key-3 {
  102                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  103                         linux,code = <KEY_3>;
  104                         label = "SW2-3";
  105                         wakeup-source;
  106                         debounce-interval = <20>;
  107                 };
  108                 key-4 {
  109                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
  110                         linux,code = <KEY_4>;
  111                         label = "SW2-4";
  112                         wakeup-source;
  113                         debounce-interval = <20>;
  114                 };
  115                 key-a {
  116                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
  117                         linux,code = <KEY_A>;
  118                         label = "SW30";
  119                         wakeup-source;
  120                         debounce-interval = <20>;
  121                 };
  122                 key-b {
  123                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
  124                         linux,code = <KEY_B>;
  125                         label = "SW31";
  126                         wakeup-source;
  127                         debounce-interval = <20>;
  128                 };
  129                 key-c {
  130                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
  131                         linux,code = <KEY_C>;
  132                         label = "SW32";
  133                         wakeup-source;
  134                         debounce-interval = <20>;
  135                 };
  136                 key-d {
  137                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
  138                         linux,code = <KEY_D>;
  139                         label = "SW33";
  140                         wakeup-source;
  141                         debounce-interval = <20>;
  142                 };
  143                 key-e {
  144                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
  145                         linux,code = <KEY_E>;
  146                         label = "SW34";
  147                         wakeup-source;
  148                         debounce-interval = <20>;
  149                 };
  150                 key-f {
  151                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
  152                         linux,code = <KEY_F>;
  153                         label = "SW35";
  154                         wakeup-source;
  155                         debounce-interval = <20>;
  156                 };
  157                 key-g {
  158                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
  159                         linux,code = <KEY_G>;
  160                         label = "SW36";
  161                         wakeup-source;
  162                         debounce-interval = <20>;
  163                 };
  164         };
  165 
  166         leds {
  167                 compatible = "gpio-leds";
  168                 led6 {
  169                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
  170                         label = "LED6";
  171                 };
  172                 led7 {
  173                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
  174                         label = "LED7";
  175                 };
  176                 led8 {
  177                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
  178                         label = "LED8";
  179                 };
  180         };
  181 
  182         vcc_sdhi0: regulator-vcc-sdhi0 {
  183                 compatible = "regulator-fixed";
  184 
  185                 regulator-name = "SDHI0 Vcc";
  186                 regulator-min-microvolt = <3300000>;
  187                 regulator-max-microvolt = <3300000>;
  188 
  189                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
  190                 enable-active-high;
  191         };
  192 
  193         vccq_sdhi0: regulator-vccq-sdhi0 {
  194                 compatible = "regulator-gpio";
  195 
  196                 regulator-name = "SDHI0 VccQ";
  197                 regulator-min-microvolt = <1800000>;
  198                 regulator-max-microvolt = <3300000>;
  199 
  200                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
  201                 gpios-states = <1>;
  202                 states = <3300000 1>, <1800000 0>;
  203         };
  204 
  205         vcc_sdhi1: regulator-vcc-sdhi1 {
  206                 compatible = "regulator-fixed";
  207 
  208                 regulator-name = "SDHI1 Vcc";
  209                 regulator-min-microvolt = <3300000>;
  210                 regulator-max-microvolt = <3300000>;
  211 
  212                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
  213                 enable-active-high;
  214         };
  215 
  216         vccq_sdhi1: regulator-vccq-sdhi1 {
  217                 compatible = "regulator-gpio";
  218 
  219                 regulator-name = "SDHI1 VccQ";
  220                 regulator-min-microvolt = <1800000>;
  221                 regulator-max-microvolt = <3300000>;
  222 
  223                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
  224                 gpios-states = <1>;
  225                 states = <3300000 1>, <1800000 0>;
  226         };
  227 
  228         vcc_sdhi2: regulator-vcc-sdhi2 {
  229                 compatible = "regulator-fixed";
  230 
  231                 regulator-name = "SDHI2 Vcc";
  232                 regulator-min-microvolt = <3300000>;
  233                 regulator-max-microvolt = <3300000>;
  234 
  235                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
  236                 enable-active-high;
  237         };
  238 
  239         vccq_sdhi2: regulator-vccq-sdhi2 {
  240                 compatible = "regulator-gpio";
  241 
  242                 regulator-name = "SDHI2 VccQ";
  243                 regulator-min-microvolt = <1800000>;
  244                 regulator-max-microvolt = <3300000>;
  245 
  246                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
  247                 gpios-states = <1>;
  248                 states = <3300000 1>, <1800000 0>;
  249         };
  250 
  251         audio_clock: audio_clock {
  252                 compatible = "fixed-clock";
  253                 #clock-cells = <0>;
  254                 clock-frequency = <11289600>;
  255         };
  256 
  257         rsnd_ak4643: sound {
  258                 compatible = "simple-audio-card";
  259 
  260                 simple-audio-card,format = "left_j";
  261                 simple-audio-card,bitclock-master = <&sndcodec>;
  262                 simple-audio-card,frame-master = <&sndcodec>;
  263 
  264                 sndcpu: simple-audio-card,cpu {
  265                         sound-dai = <&rcar_sound>;
  266                 };
  267 
  268                 sndcodec: simple-audio-card,codec {
  269                         sound-dai = <&ak4643>;
  270                         clocks = <&audio_clock>;
  271                 };
  272         };
  273 
  274         hdmi-in {
  275                 compatible = "hdmi-connector";
  276                 type = "a";
  277 
  278                 port {
  279                         hdmi_con_in: endpoint {
  280                                 remote-endpoint = <&adv7612_in>;
  281                         };
  282                 };
  283         };
  284 
  285         cec_clock: cec-clock {
  286                 compatible = "fixed-clock";
  287                 #clock-cells = <0>;
  288                 clock-frequency = <12000000>;
  289         };
  290 
  291         hdmi-out {
  292                 compatible = "hdmi-connector";
  293                 type = "a";
  294 
  295                 port {
  296                         hdmi_con_out: endpoint {
  297                                 remote-endpoint = <&adv7511_out>;
  298                         };
  299                 };
  300         };
  301 
  302         x2_clk: x2-clock {
  303                 compatible = "fixed-clock";
  304                 #clock-cells = <0>;
  305                 clock-frequency = <74250000>;
  306         };
  307 
  308         x13_clk: x13-clock {
  309                 compatible = "fixed-clock";
  310                 #clock-cells = <0>;
  311                 clock-frequency = <148500000>;
  312         };
  313 
  314         gpioi2c1: i2c-9 {
  315                 #address-cells = <1>;
  316                 #size-cells = <0>;
  317                 compatible = "i2c-gpio";
  318                 status = "disabled";
  319                 scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  320                 sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  321                 i2c-gpio,delay-us = <5>;
  322         };
  323 
  324         gpioi2c2: i2c-10 {
  325                 #address-cells = <1>;
  326                 #size-cells = <0>;
  327                 compatible = "i2c-gpio";
  328                 status = "disabled";
  329                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  330                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  331                 i2c-gpio,delay-us = <5>;
  332         };
  333 
  334         gpioi2c4: i2c-11 {
  335                 #address-cells = <1>;
  336                 #size-cells = <0>;
  337                 compatible = "i2c-gpio";
  338                 status = "disabled";
  339                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  340                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  341                 i2c-gpio,delay-us = <5>;
  342         };
  343 
  344         /*
  345          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
  346          * A fallback to GPIO is provided.
  347          */
  348         i2cexio1: i2c-12 {
  349                 compatible = "i2c-demux-pinctrl";
  350                 i2c-parent = <&i2c1>, <&gpioi2c1>;
  351                 i2c-bus-name = "i2c-exio1";
  352                 #address-cells = <1>;
  353                 #size-cells = <0>;
  354         };
  355 
  356         /*
  357          * A fallback to GPIO is provided for I2C2.
  358          */
  359         i2chdmi: i2c-13 {
  360                 compatible = "i2c-demux-pinctrl";
  361                 i2c-parent = <&i2c2>, <&gpioi2c2>;
  362                 i2c-bus-name = "i2c-hdmi";
  363                 #address-cells = <1>;
  364                 #size-cells = <0>;
  365 
  366                 ak4643: codec@12 {
  367                         compatible = "asahi-kasei,ak4643";
  368                         #sound-dai-cells = <0>;
  369                         reg = <0x12>;
  370                 };
  371 
  372                 composite-in@20 {
  373                         compatible = "adi,adv7180";
  374                         reg = <0x20>;
  375 
  376                         port {
  377                                 adv7180: endpoint {
  378                                         bus-width = <8>;
  379                                         remote-endpoint = <&vin1ep>;
  380                                 };
  381                         };
  382                 };
  383 
  384                 hdmi@39 {
  385                         compatible = "adi,adv7511w";
  386                         reg = <0x39>;
  387                         interrupt-parent = <&gpio3>;
  388                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
  389                         clocks = <&cec_clock>;
  390                         clock-names = "cec";
  391 
  392                         adi,input-depth = <8>;
  393                         adi,input-colorspace = "rgb";
  394                         adi,input-clock = "1x";
  395 
  396                         ports {
  397                                 #address-cells = <1>;
  398                                 #size-cells = <0>;
  399 
  400                                 port@0 {
  401                                         reg = <0>;
  402                                         adv7511_in: endpoint {
  403                                                 remote-endpoint = <&du_out_rgb>;
  404                                         };
  405                                 };
  406 
  407                                 port@1 {
  408                                         reg = <1>;
  409                                         adv7511_out: endpoint {
  410                                                 remote-endpoint = <&hdmi_con_out>;
  411                                         };
  412                                 };
  413                         };
  414                 };
  415 
  416                 hdmi-in@4c {
  417                         compatible = "adi,adv7612";
  418                         reg = <0x4c>;
  419                         interrupt-parent = <&gpio4>;
  420                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
  421                         default-input = <0>;
  422 
  423                         ports {
  424                                 #address-cells = <1>;
  425                                 #size-cells = <0>;
  426 
  427                                 port@0 {
  428                                         reg = <0>;
  429                                         adv7612_in: endpoint {
  430                                                 remote-endpoint = <&hdmi_con_in>;
  431                                         };
  432                                 };
  433 
  434                                 port@2 {
  435                                         reg = <2>;
  436                                         adv7612_out: endpoint {
  437                                                 remote-endpoint = <&vin0ep2>;
  438                                         };
  439                                 };
  440                         };
  441                 };
  442 
  443                 eeprom@50 {
  444                         compatible = "renesas,r1ex24002", "atmel,24c02";
  445                         reg = <0x50>;
  446                         pagesize = <16>;
  447                 };
  448         };
  449 
  450         /*
  451          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
  452          * A fallback to GPIO is provided.
  453          */
  454         i2cexio4: i2c-14 {
  455                 compatible = "i2c-demux-pinctrl";
  456                 i2c-parent = <&i2c4>, <&gpioi2c4>;
  457                 i2c-bus-name = "i2c-exio4";
  458                 #address-cells = <1>;
  459                 #size-cells = <0>;
  460         };
  461 };
  462 
  463 &du {
  464         pinctrl-0 = <&du_pins>;
  465         pinctrl-names = "default";
  466         status = "okay";
  467 
  468         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
  469                  <&x13_clk>, <&x2_clk>;
  470         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
  471 
  472         ports {
  473                 port@0 {
  474                         endpoint {
  475                                 remote-endpoint = <&adv7511_in>;
  476                         };
  477                 };
  478         };
  479 };
  480 
  481 &lvds0 {
  482         ports {
  483                 port@1 {
  484                         lvds_connector: endpoint {
  485                         };
  486                 };
  487         };
  488 };
  489 
  490 &extal_clk {
  491         clock-frequency = <20000000>;
  492 };
  493 
  494 &pfc {
  495         pinctrl-0 = <&scif_clk_pins>;
  496         pinctrl-names = "default";
  497 
  498         i2c1_pins: i2c1 {
  499                 groups = "i2c1";
  500                 function = "i2c1";
  501         };
  502 
  503         i2c2_pins: i2c2 {
  504                 groups = "i2c2";
  505                 function = "i2c2";
  506         };
  507 
  508         i2c4_pins: i2c4 {
  509                 groups = "i2c4_c";
  510                 function = "i2c4";
  511         };
  512 
  513         du_pins: du {
  514                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
  515                 function = "du";
  516         };
  517 
  518         scif0_pins: scif0 {
  519                 groups = "scif0_data_d";
  520                 function = "scif0";
  521         };
  522 
  523         scif1_pins: scif1 {
  524                 groups = "scif1_data_d";
  525                 function = "scif1";
  526         };
  527 
  528         scif_clk_pins: scif_clk {
  529                 groups = "scif_clk";
  530                 function = "scif_clk";
  531         };
  532 
  533         ether_pins: ether {
  534                 groups = "eth_link", "eth_mdio", "eth_rmii";
  535                 function = "eth";
  536         };
  537 
  538         phy1_pins: phy1 {
  539                 groups = "intc_irq0";
  540                 function = "intc";
  541         };
  542 
  543         pmic_irq_pins: pmicirq {
  544                 groups = "intc_irq2";
  545                 function = "intc";
  546         };
  547 
  548         sdhi0_pins: sd0 {
  549                 groups = "sdhi0_data4", "sdhi0_ctrl";
  550                 function = "sdhi0";
  551                 power-source = <3300>;
  552         };
  553 
  554         sdhi0_pins_uhs: sd0_uhs {
  555                 groups = "sdhi0_data4", "sdhi0_ctrl";
  556                 function = "sdhi0";
  557                 power-source = <1800>;
  558         };
  559 
  560         sdhi1_pins: sd1 {
  561                 groups = "sdhi1_data4", "sdhi1_ctrl";
  562                 function = "sdhi1";
  563                 power-source = <3300>;
  564         };
  565 
  566         sdhi1_pins_uhs: sd1_uhs {
  567                 groups = "sdhi1_data4", "sdhi1_ctrl";
  568                 function = "sdhi1";
  569                 power-source = <1800>;
  570         };
  571 
  572         sdhi2_pins: sd2 {
  573                 groups = "sdhi2_data4", "sdhi2_ctrl";
  574                 function = "sdhi2";
  575                 power-source = <3300>;
  576         };
  577 
  578         sdhi2_pins_uhs: sd2_uhs {
  579                 groups = "sdhi2_data4", "sdhi2_ctrl";
  580                 function = "sdhi2";
  581                 power-source = <1800>;
  582         };
  583 
  584         qspi_pins: qspi {
  585                 groups = "qspi_ctrl", "qspi_data4";
  586                 function = "qspi";
  587         };
  588 
  589         msiof0_pins: msiof0 {
  590                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
  591                                  "msiof0_tx";
  592                 function = "msiof0";
  593         };
  594 
  595         usb0_pins: usb0 {
  596                 groups = "usb0";
  597                 function = "usb0";
  598         };
  599 
  600         usb1_pins: usb1 {
  601                 groups = "usb1";
  602                 function = "usb1";
  603         };
  604 
  605         vin0_pins: vin0 {
  606                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
  607                 function = "vin0";
  608         };
  609 
  610         vin1_pins: vin1 {
  611                 groups = "vin1_data8", "vin1_clk";
  612                 function = "vin1";
  613         };
  614 
  615         sound_pins: sound {
  616                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
  617                 function = "ssi";
  618         };
  619 
  620         sound_clk_pins: sound_clk {
  621                 groups = "audio_clk_a";
  622                 function = "audio_clk";
  623         };
  624 
  625         keyboard_pins: keyboard {
  626                 pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
  627                 bias-pull-up;
  628         };
  629 };
  630 
  631 &ether {
  632         pinctrl-0 = <&ether_pins>, <&phy1_pins>;
  633         pinctrl-names = "default";
  634 
  635         phy-handle = <&phy1>;
  636         renesas,ether-link-active-low;
  637         status = "okay";
  638 
  639         phy1: ethernet-phy@1 {
  640                 compatible = "ethernet-phy-id0022.1537",
  641                              "ethernet-phy-ieee802.3-c22";
  642                 reg = <1>;
  643                 interrupt-parent = <&irqc0>;
  644                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
  645                 micrel,led-mode = <1>;
  646                 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
  647         };
  648 };
  649 
  650 &cmt0 {
  651         status = "okay";
  652 };
  653 
  654 &rwdt {
  655         timeout-sec = <60>;
  656         status = "okay";
  657 };
  658 
  659 &sata0 {
  660         status = "okay";
  661 };
  662 
  663 &scif0 {
  664         pinctrl-0 = <&scif0_pins>;
  665         pinctrl-names = "default";
  666 
  667         status = "okay";
  668 };
  669 
  670 &scif1 {
  671         pinctrl-0 = <&scif1_pins>;
  672         pinctrl-names = "default";
  673 
  674         status = "okay";
  675 };
  676 
  677 &scif_clk {
  678         clock-frequency = <14745600>;
  679 };
  680 
  681 &sdhi0 {
  682         pinctrl-0 = <&sdhi0_pins>;
  683         pinctrl-1 = <&sdhi0_pins_uhs>;
  684         pinctrl-names = "default", "state_uhs";
  685 
  686         vmmc-supply = <&vcc_sdhi0>;
  687         vqmmc-supply = <&vccq_sdhi0>;
  688         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
  689         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
  690         sd-uhs-sdr50;
  691         sd-uhs-sdr104;
  692         status = "okay";
  693 };
  694 
  695 &sdhi1 {
  696         pinctrl-0 = <&sdhi1_pins>;
  697         pinctrl-1 = <&sdhi1_pins_uhs>;
  698         pinctrl-names = "default", "state_uhs";
  699 
  700         vmmc-supply = <&vcc_sdhi1>;
  701         vqmmc-supply = <&vccq_sdhi1>;
  702         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
  703         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
  704         sd-uhs-sdr50;
  705         status = "okay";
  706 };
  707 
  708 &sdhi2 {
  709         pinctrl-0 = <&sdhi2_pins>;
  710         pinctrl-1 = <&sdhi2_pins_uhs>;
  711         pinctrl-names = "default", "state_uhs";
  712 
  713         vmmc-supply = <&vcc_sdhi2>;
  714         vqmmc-supply = <&vccq_sdhi2>;
  715         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
  716         sd-uhs-sdr50;
  717         status = "okay";
  718 };
  719 
  720 &qspi {
  721         pinctrl-0 = <&qspi_pins>;
  722         pinctrl-names = "default";
  723 
  724         status = "okay";
  725 
  726         flash: flash@0 {
  727                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
  728                 reg = <0>;
  729                 spi-max-frequency = <30000000>;
  730                 spi-tx-bus-width = <4>;
  731                 spi-rx-bus-width = <4>;
  732                 spi-cpha;
  733                 spi-cpol;
  734                 m25p,fast-read;
  735 
  736                 partitions {
  737                         compatible = "fixed-partitions";
  738                         #address-cells = <1>;
  739                         #size-cells = <1>;
  740 
  741                         partition@0 {
  742                                 label = "loader";
  743                                 reg = <0x00000000 0x00080000>;
  744                                 read-only;
  745                         };
  746                         partition@80000 {
  747                                 label = "user";
  748                                 reg = <0x00080000 0x00580000>;
  749                                 read-only;
  750                         };
  751                         partition@600000 {
  752                                 label = "flash";
  753                                 reg = <0x00600000 0x03a00000>;
  754                         };
  755                 };
  756         };
  757 };
  758 
  759 &msiof0 {
  760         pinctrl-0 = <&msiof0_pins>;
  761         pinctrl-names = "default";
  762 
  763         status = "okay";
  764 
  765         pmic: pmic@0 {
  766                 compatible = "renesas,r2a11302ft";
  767                 reg = <0>;
  768                 spi-max-frequency = <6000000>;
  769                 spi-cpol;
  770                 spi-cpha;
  771         };
  772 };
  773 
  774 &i2c1 {
  775         pinctrl-0 = <&i2c1_pins>;
  776         pinctrl-names = "i2c-exio1";
  777 };
  778 
  779 &i2c2 {
  780         pinctrl-0 = <&i2c2_pins>;
  781         pinctrl-names = "i2c-hdmi";
  782 
  783         clock-frequency = <100000>;
  784 };
  785 
  786 &i2c4 {
  787         pinctrl-0 = <&i2c4_pins>;
  788         pinctrl-names = "i2c-exio4";
  789 };
  790 
  791 &i2c6 {
  792         pinctrl-names = "default";
  793         pinctrl-0 = <&pmic_irq_pins>;
  794         status = "okay";
  795         clock-frequency = <100000>;
  796 
  797         pmic@58 {
  798                 compatible = "dlg,da9063";
  799                 reg = <0x58>;
  800                 interrupt-parent = <&irqc0>;
  801                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
  802                 interrupt-controller;
  803 
  804                 rtc {
  805                         compatible = "dlg,da9063-rtc";
  806                 };
  807 
  808                 watchdog {
  809                         compatible = "dlg,da9063-watchdog";
  810                 };
  811         };
  812 
  813         vdd_dvfs: regulator@68 {
  814                 compatible = "dlg,da9210";
  815                 reg = <0x68>;
  816                 interrupt-parent = <&irqc0>;
  817                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
  818 
  819                 regulator-min-microvolt = <1000000>;
  820                 regulator-max-microvolt = <1000000>;
  821                 regulator-boot-on;
  822                 regulator-always-on;
  823         };
  824 };
  825 
  826 &pci0 {
  827         status = "okay";
  828         pinctrl-0 = <&usb0_pins>;
  829         pinctrl-names = "default";
  830 };
  831 
  832 &pci1 {
  833         status = "okay";
  834         pinctrl-0 = <&usb1_pins>;
  835         pinctrl-names = "default";
  836 };
  837 
  838 &hsusb {
  839         status = "okay";
  840         pinctrl-0 = <&usb0_pins>;
  841         pinctrl-names = "default";
  842         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
  843 };
  844 
  845 &usbphy {
  846         status = "okay";
  847 };
  848 
  849 &pcie_bus_clk {
  850         clock-frequency = <100000000>;
  851 };
  852 
  853 &pciec {
  854         status = "okay";
  855 };
  856 
  857 &cpu0 {
  858         cpu0-supply = <&vdd_dvfs>;
  859 };
  860 
  861 /* HDMI video input */
  862 &vin0 {
  863         status = "okay";
  864         pinctrl-0 = <&vin0_pins>;
  865         pinctrl-names = "default";
  866 
  867         port {
  868                 vin0ep2: endpoint {
  869                         remote-endpoint = <&adv7612_out>;
  870                         bus-width = <24>;
  871                         hsync-active = <0>;
  872                         vsync-active = <0>;
  873                         pclk-sample = <1>;
  874                         data-active = <1>;
  875                 };
  876         };
  877 };
  878 
  879 /* composite video input */
  880 &vin1 {
  881         status = "okay";
  882         pinctrl-0 = <&vin1_pins>;
  883         pinctrl-names = "default";
  884 
  885         port {
  886                 vin1ep: endpoint {
  887                         remote-endpoint = <&adv7180>;
  888                         bus-width = <8>;
  889                 };
  890         };
  891 };
  892 
  893 &rcar_sound {
  894         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
  895         pinctrl-names = "default";
  896 
  897         /* Single DAI */
  898         #sound-dai-cells = <0>;
  899 
  900         status = "okay";
  901 
  902         rcar_sound,dai {
  903                 dai0 {
  904                         playback = <&ssi0>, <&src2>, <&dvc0>;
  905                         capture  = <&ssi1>, <&src3>, <&dvc1>;
  906                 };
  907         };
  908 };
  909 
  910 &ssi1 {
  911         shared-pin;
  912 };
Cache object: b1448d986436d4d42a112d3dc1ee661f
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/r8a7791-koelsch.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/r8a7791-koelsch.dts
