r8a7792-blanche.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Device Tree Source for the Blanche board
    4  *
    5  * Copyright (C) 2014 Renesas Electronics Corporation
    6  * Copyright (C) 2016 Cogent  Embedded, Inc.
    7  */
    8 
    9 /dts-v1/;
   10 #include "r8a7792.dtsi"
   11 #include <dt-bindings/gpio/gpio.h>
   12 #include <dt-bindings/input/input.h>
   13 
   14 / {
   15         model = "Blanche";
   16         compatible = "renesas,blanche", "renesas,r8a7792";
   17 
   18         aliases {
   19                 serial0 = &scif0;
   20                 serial1 = &scif3;
   21         };
   22 
   23         chosen {
   24                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
   25                 stdout-path = "serial0:115200n8";
   26         };
   27 
   28         memory@40000000 {
   29                 device_type = "memory";
   30                 reg = <0 0x40000000 0 0x40000000>;
   31         };
   32 
   33         d3_3v: regulator-3v3 {
   34                 compatible = "regulator-fixed";
   35                 regulator-name = "D3.3V";
   36                 regulator-min-microvolt = <3300000>;
   37                 regulator-max-microvolt = <3300000>;
   38                 regulator-boot-on;
   39                 regulator-always-on;
   40         };
   41 
   42         ethernet@18000000 {
   43                 compatible = "smsc,lan89218", "smsc,lan9115";
   44                 reg = <0 0x18000000 0 0x100>;
   45                 phy-mode = "mii";
   46                 interrupt-parent = <&irqc>;
   47                 interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
   48                 smsc,irq-push-pull;
   49                 reg-io-width = <4>;
   50                 vddvario-supply = <&d3_3v>;
   51                 vdd33a-supply = <&d3_3v>;
   52 
   53                 pinctrl-0 = <&lan89218_pins>;
   54                 pinctrl-names = "default";
   55         };
   56 
   57         vga-encoder {
   58                 compatible = "adi,adv7123";
   59 
   60                 ports {
   61                         #address-cells = <1>;
   62                         #size-cells = <0>;
   63 
   64                         port@0 {
   65                                 reg = <0>;
   66                                 adv7123_in: endpoint {
   67                                         remote-endpoint = <&du_out_rgb1>;
   68                                 };
   69                         };
   70                         port@1 {
   71                                 reg = <1>;
   72                                 adv7123_out: endpoint {
   73                                         remote-endpoint = <&vga_in>;
   74                                 };
   75                         };
   76                 };
   77         };
   78 
   79         hdmi-out {
   80                 compatible = "hdmi-connector";
   81                 type = "a";
   82 
   83                 port {
   84                         hdmi_con: endpoint {
   85                                 remote-endpoint = <&adv7511_out>;
   86                         };
   87                 };
   88         };
   89 
   90         vga {
   91                 compatible = "vga-connector";
   92 
   93                 port {
   94                         vga_in: endpoint {
   95                                 remote-endpoint = <&adv7123_out>;
   96                         };
   97                 };
   98         };
   99 
  100         x1_clk: x1 {
  101                 compatible = "fixed-clock";
  102                 #clock-cells = <0>;
  103                 clock-frequency = <74250000>;
  104         };
  105 
  106         x2_clk: x2 {
  107                 compatible = "fixed-clock";
  108                 #clock-cells = <0>;
  109                 clock-frequency = <65000000>;
  110         };
  111 
  112         keyboard {
  113                 compatible = "gpio-keys";
  114 
  115                 pinctrl-0 = <&keyboard_pins>;
  116                 pinctrl-names = "default";
  117 
  118                 key-1 {
  119                         linux,code = <KEY_1>;
  120                         label = "SW2-1";
  121                         wakeup-source;
  122                         debounce-interval = <20>;
  123                         gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
  124                 };
  125                 key-2 {
  126                         linux,code = <KEY_2>;
  127                         label = "SW2-2";
  128                         wakeup-source;
  129                         debounce-interval = <20>;
  130                         gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
  131                 };
  132                 key-3 {
  133                         linux,code = <KEY_3>;
  134                         label = "SW2-3";
  135                         wakeup-source;
  136                         debounce-interval = <20>;
  137                         gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
  138                 };
  139                 key-4 {
  140                         linux,code = <KEY_4>;
  141                         label = "SW2-4";
  142                         wakeup-source;
  143                         debounce-interval = <20>;
  144                         gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
  145                 };
  146                 key-a {
  147                         linux,code = <KEY_A>;
  148                         label = "SW24";
  149                         wakeup-source;
  150                         debounce-interval = <20>;
  151                         gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
  152                 };
  153                 key-b {
  154                         linux,code = <KEY_B>;
  155                         label = "SW25";
  156                         wakeup-source;
  157                         debounce-interval = <20>;
  158                         gpios = <&gpio11 2 GPIO_ACTIVE_LOW>;
  159                 };
  160         };
  161 
  162         leds {
  163                 compatible = "gpio-leds";
  164 
  165                 led17 {
  166                         gpios = <&gpio10 10 GPIO_ACTIVE_HIGH>;
  167                 };
  168                 led18 {
  169                         gpios = <&gpio10 11 GPIO_ACTIVE_HIGH>;
  170                 };
  171                 led19 {
  172                         gpios = <&gpio10 12 GPIO_ACTIVE_HIGH>;
  173                 };
  174                 led20 {
  175                         gpios = <&gpio10 23 GPIO_ACTIVE_HIGH>;
  176                 };
  177         };
  178 
  179         vcc_sdhi0: regulator-vcc-sdhi0 {
  180                 compatible = "regulator-fixed";
  181 
  182                 regulator-name = "SDHI0 Vcc";
  183                 regulator-min-microvolt = <3300000>;
  184                 regulator-max-microvolt = <3300000>;
  185 
  186                 gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
  187                 enable-active-high;
  188         };
  189 };
  190 
  191 &extal_clk {
  192         clock-frequency = <20000000>;
  193 };
  194 
  195 &can_clk {
  196         clock-frequency = <48000000>;
  197 };
  198 
  199 &pfc {
  200         scif0_pins: scif0 {
  201                 groups = "scif0_data";
  202                 function = "scif0";
  203         };
  204 
  205         scif3_pins: scif3 {
  206                 groups = "scif3_data";
  207                 function = "scif3";
  208         };
  209 
  210         lan89218_pins: lan89218 {
  211                 intc {
  212                         groups = "intc_irq0";
  213                         function = "intc";
  214                 };
  215                 lbsc {
  216                         groups = "lbsc_ex_cs0";
  217                         function = "lbsc";
  218                 };
  219         };
  220 
  221         can0_pins: can0 {
  222                 groups = "can0_data", "can_clk";
  223                 function = "can0";
  224         };
  225 
  226         sdhi0_pins: sdhi0 {
  227                 groups = "sdhi0_data4", "sdhi0_ctrl";
  228                 function = "sdhi0";
  229         };
  230 
  231         du0_pins: du0 {
  232                 groups = "du0_rgb888", "du0_sync", "du0_disp";
  233                 function = "du0";
  234         };
  235 
  236         du1_pins: du1 {
  237                 groups = "du1_rgb666", "du1_sync", "du1_disp";
  238                 function = "du1";
  239         };
  240 
  241         keyboard_pins: keyboard {
  242                 pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_02";
  243                 bias-pull-up;
  244         };
  245 
  246         pmic_irq_pins: pmicirq {
  247                 groups = "intc_irq2";
  248                 function = "intc";
  249         };
  250 };
  251 
  252 &rwdt {
  253         timeout-sec = <60>;
  254         status = "okay";
  255 };
  256 
  257 &scif0 {
  258         pinctrl-0 = <&scif0_pins>;
  259         pinctrl-names = "default";
  260 
  261         status = "okay";
  262 };
  263 
  264 &scif3 {
  265         pinctrl-0 = <&scif3_pins>;
  266         pinctrl-names = "default";
  267 
  268         status = "okay";
  269 };
  270 
  271 &can0 {
  272         pinctrl-0 = <&can0_pins>;
  273         pinctrl-names = "default";
  274 
  275         status = "okay";
  276 };
  277 
  278 &sdhi0 {
  279         pinctrl-0 = <&sdhi0_pins>;
  280         pinctrl-names = "default";
  281 
  282         vmmc-supply = <&vcc_sdhi0>;
  283         cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
  284         status = "okay";
  285 };
  286 
  287 &i2c1 {
  288         status = "okay";
  289         clock-frequency = <400000>;
  290 
  291         hdmi@39 {
  292                 compatible = "adi,adv7511w";
  293                 reg = <0x39>;
  294                 interrupt-parent = <&irqc>;
  295                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
  296 
  297                 adi,input-depth = <8>;
  298                 adi,input-colorspace = "rgb";
  299                 adi,input-clock = "1x";
  300 
  301                 ports {
  302                         #address-cells = <1>;
  303                         #size-cells = <0>;
  304 
  305                         port@0 {
  306                                 reg = <0>;
  307                                 adv7511_in: endpoint {
  308                                         remote-endpoint = <&du_out_rgb0>;
  309                                 };
  310                         };
  311 
  312                         port@1 {
  313                                 reg = <1>;
  314                                 adv7511_out: endpoint {
  315                                         remote-endpoint = <&hdmi_con>;
  316                                 };
  317                         };
  318                 };
  319         };
  320 };
  321 
  322 &iic3 {
  323         status = "okay";
  324 
  325         pmic@58 {
  326                 compatible = "dlg,da9063";
  327                 reg = <0x58>;
  328                 pinctrl-names = "default";
  329                 pinctrl-0 = <&pmic_irq_pins>;
  330                 interrupt-parent = <&irqc>;
  331                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
  332                 interrupt-controller;
  333 
  334                 rtc {
  335                         compatible = "dlg,da9063-rtc";
  336                 };
  337 
  338                 watchdog {
  339                         compatible = "dlg,da9063-watchdog";
  340                 };
  341         };
  342 };
  343 
  344 &du {
  345         pinctrl-0 = <&du0_pins>, <&du1_pins>;
  346         pinctrl-names = "default";
  347 
  348         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>;
  349         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
  350         status = "okay";
  351 
  352         ports {
  353                 port@0 {
  354                         endpoint {
  355                                 remote-endpoint = <&adv7511_in>;
  356                         };
  357                 };
  358                 port@1 {
  359                         endpoint {
  360                                 remote-endpoint = <&adv7123_in>;
  361                         };
  362                 };
  363         };
  364 };
Cache object: 557c635cd89d54eecfe3febdb630dbfc
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/r8a7792-blanche.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/r8a7792-blanche.dts
