s5pv210-aries.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  * Samsung's S5PV210 based Galaxy Aries board device tree source
    4  */
    5 
    6 /dts-v1/;
    7 #include <dt-bindings/gpio/gpio.h>
    8 #include <dt-bindings/interrupt-controller/irq.h>
    9 #include "s5pv210.dtsi"
   10 
   11 / {
   12         compatible = "samsung,aries", "samsung,s5pv210";
   13 
   14         aliases: aliases {
   15                 i2c4 = &i2c_sound;
   16                 i2c5 = &i2c_accel;
   17                 i2c6 = &i2c_pmic;
   18                 i2c7 = &i2c_musb;
   19                 i2c9 = &i2c_fuel;
   20                 i2c10 = &i2c_touchkey;
   21                 i2c11 = &i2c_prox;
   22                 i2c12 = &i2c_magnetometer;
   23         };
   24 
   25         memory@30000000 {
   26                 device_type = "memory";
   27                 reg = <0x30000000 0x05000000>,
   28                         <0x40000000 0x10000000>,
   29                         <0x50000000 0x08000000>;
   30         };
   31 
   32         reserved-memory {
   33                 #address-cells = <1>;
   34                 #size-cells = <1>;
   35                 ranges;
   36 
   37                 mfc_left: region@43000000 {
   38                         compatible = "shared-dma-pool";
   39                         no-map;
   40                         reg = <0x43000000 0x2000000>;
   41                 };
   42 
   43                 mfc_right: region@51000000 {
   44                         compatible = "shared-dma-pool";
   45                         no-map;
   46                         reg = <0x51000000 0x2000000>;
   47                 };
   48         };
   49 
   50         pmic_ap_clk: clock-0 {
   51                 /* Workaround for missing clock on PMIC */
   52                 compatible = "fixed-clock";
   53                 #clock-cells = <0>;
   54                 clock-frequency = <32768>;
   55         };
   56 
   57         bt_codec: bt-sco {
   58                 compatible = "linux,bt-sco";
   59                 #sound-dai-cells = <0>;
   60         };
   61 
   62         vibrator_pwr: regulator-fixed-0 {
   63                 compatible = "regulator-fixed";
   64                 regulator-name = "vibrator-en";
   65                 enable-active-high;
   66                 gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
   67 
   68                 pinctrl-names = "default";
   69                 pinctrl-0 = <&vibrator_ena>;
   70         };
   71 
   72         touchkey_vdd: regulator-fixed-1 {
   73                 compatible = "regulator-fixed";
   74                 regulator-name = "VTOUCH_3.3V";
   75                 regulator-min-microvolt = <3300000>;
   76                 regulator-max-microvolt = <3300000>;
   77                 enable-active-high;
   78                 gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
   79 
   80                 pinctrl-names = "default";
   81                 pinctrl-0 = <&touchkey_vdd_ena>;
   82         };
   83 
   84         gp2a_vled: regulator-fixed-2 {
   85                 compatible = "regulator-fixed";
   86                 regulator-name = "VLED";
   87                 enable-active-high;
   88                 gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
   89                 regulator-min-microvolt = <2800000>;
   90                 regulator-max-microvolt = <2800000>;
   91 
   92                 pinctrl-names = "default";
   93                 pinctrl-0 = <&gp2a_power>;
   94         };
   95 
   96         wifi_pwrseq: wifi-pwrseq {
   97                 compatible = "mmc-pwrseq-simple";
   98                 reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
   99                 pinctrl-names = "default";
  100                 pinctrl-0 = <&wlan_gpio_rst>;
  101                 post-power-on-delay-ms = <500>;
  102                 power-off-delay-us = <500>;
  103         };
  104 
  105         i2c_sound: i2c-gpio-0 {
  106                 compatible = "i2c-gpio";
  107                 sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  108                 scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  109                 i2c-gpio,delay-us = <2>;
  110                 #address-cells = <1>;
  111                 #size-cells = <0>;
  112 
  113                 pinctrl-names = "default";
  114                 pinctrl-0 = <&sound_i2c_pins>;
  115 
  116                 wm8994: audio-codec@1a {
  117                         compatible = "wlf,wm8994";
  118                         reg = <0x1a>;
  119 
  120                         #sound-dai-cells = <0>;
  121 
  122                         gpio-controller;
  123                         #gpio-cells = <2>;
  124 
  125                         clocks = <&clocks MOUT_CLKOUT>;
  126                         clock-names = "MCLK1";
  127 
  128                         AVDD2-supply = <&buck3_reg>;
  129                         DBVDD-supply = <&buck3_reg>;
  130                         CPVDD-supply = <&buck3_reg>;
  131                         SPKVDD1-supply = <&buck3_reg>;
  132                         SPKVDD2-supply = <&buck3_reg>;
  133 
  134                         wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
  135                                         0xa101 0x0100 0x8100 0x0100 0x0100
  136                                         0x0100>;
  137 
  138                         wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
  139                         wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
  140 
  141                         wlf,lineout1-se;
  142                         wlf,lineout2-se;
  143 
  144                         assigned-clocks = <&clocks MOUT_CLKOUT>;
  145                         assigned-clock-rates = <0>;
  146                         assigned-clock-parents = <&xusbxti>;
  147 
  148                         pinctrl-names = "default";
  149                         pinctrl-0 = <&codec_ldo>;
  150                 };
  151         };
  152 
  153         i2c_accel: i2c-gpio-1 {
  154                 compatible = "i2c-gpio";
  155                 sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  156                 scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  157                 i2c-gpio,delay-us = <2>;
  158                 #address-cells = <1>;
  159                 #size-cells = <0>;
  160 
  161                 pinctrl-names = "default";
  162                 pinctrl-0 = <&accel_i2c_pins>;
  163 
  164                 accelerometer@38 {
  165                         compatible = "bosch,bma023";
  166                         reg = <0x38>;
  167 
  168                         vdd-supply = <&ldo9_reg>;
  169                         vddio-supply = <&ldo9_reg>;
  170                 };
  171         };
  172 
  173         i2c_pmic: i2c-gpio-2 {
  174                 compatible = "i2c-gpio";
  175                 sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  176                 scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  177                 i2c-gpio,delay-us = <2>;
  178                 #address-cells = <1>;
  179                 #size-cells = <0>;
  180 
  181                 pinctrl-names = "default";
  182                 pinctrl-0 = <&pmic_i2c_pins>;
  183 
  184                 pmic@66 {
  185                         compatible = "maxim,max8998";
  186                         reg = <0x66>;
  187                         interrupt-parent = <&gph0>;
  188                         interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
  189 
  190                         max8998,pmic-buck1-default-dvs-idx = <1>;
  191                         max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
  192                                                         <&gph0 4 GPIO_ACTIVE_HIGH>;
  193                         max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
  194                                                         <1050000>, <950000>;
  195 
  196                         max8998,pmic-buck2-default-dvs-idx = <0>;
  197                         max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
  198                         max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
  199 
  200                         pinctrl-names = "default";
  201                         pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
  202 
  203                         regulators {
  204                                 ldo2_reg: LDO2 {
  205                                         regulator-name = "VALIVE_1.2V";
  206                                         regulator-min-microvolt = <1200000>;
  207                                         regulator-max-microvolt = <1200000>;
  208                                         regulator-always-on;
  209 
  210                                         regulator-state-mem {
  211                                                 regulator-on-in-suspend;
  212                                         };
  213                                 };
  214 
  215                                 ldo3_reg: LDO3 {
  216                                         regulator-name = "VUSB_1.1V";
  217                                         regulator-min-microvolt = <1100000>;
  218                                         regulator-max-microvolt = <1100000>;
  219 
  220                                         regulator-state-mem {
  221                                                 regulator-off-in-suspend;
  222                                         };
  223                                 };
  224 
  225                                 ldo4_reg: LDO4 {
  226                                         regulator-name = "VADC_3.3V";
  227                                         regulator-min-microvolt = <3300000>;
  228                                         regulator-max-microvolt = <3300000>;
  229 
  230                                         regulator-state-mem {
  231                                                 regulator-off-in-suspend;
  232                                         };
  233                                 };
  234 
  235                                 ldo5_reg: LDO5 {
  236                                         regulator-name = "VTF_2.8V";
  237                                         regulator-min-microvolt = <2800000>;
  238                                         regulator-max-microvolt = <2800000>;
  239 
  240                                         regulator-state-mem {
  241                                                 regulator-off-in-suspend;
  242                                         };
  243                                 };
  244 
  245                                 ldo6_reg: LDO6 {
  246                                         regulator-name = "LDO6";
  247                                         regulator-min-microvolt = <1600000>;
  248                                         regulator-max-microvolt = <3600000>;
  249                                 };
  250 
  251                                 ldo7_reg: LDO7 {
  252                                         regulator-name = "VLCD_1.8V";
  253                                         regulator-min-microvolt = <1800000>;
  254                                         regulator-max-microvolt = <1800000>;
  255 
  256                                         regulator-state-mem {
  257                                                 regulator-off-in-suspend;
  258                                         };
  259                                 };
  260 
  261                                 ldo8_reg: LDO8 {
  262                                         regulator-name = "VUSB_3.3V";
  263                                         regulator-min-microvolt = <3300000>;
  264                                         regulator-max-microvolt = <3300000>;
  265 
  266                                         regulator-state-mem {
  267                                                 regulator-off-in-suspend;
  268                                         };
  269                                 };
  270 
  271                                 ldo9_reg: LDO9 {
  272                                         regulator-name = "VCC_2.8V_PDA";
  273                                         regulator-min-microvolt = <2800000>;
  274                                         regulator-max-microvolt = <2800000>;
  275                                         regulator-always-on;
  276                                 };
  277 
  278                                 ldo10_reg: LDO10 {
  279                                         regulator-name = "VPLL_1.2V";
  280                                         regulator-min-microvolt = <1200000>;
  281                                         regulator-max-microvolt = <1200000>;
  282                                         regulator-always-on;
  283 
  284                                         regulator-state-mem {
  285                                                 regulator-on-in-suspend;
  286                                         };
  287                                 };
  288 
  289                                 ldo11_reg: LDO11 {
  290                                         regulator-name = "CAM_AF_3.0V";
  291                                         regulator-min-microvolt = <3000000>;
  292                                         regulator-max-microvolt = <3000000>;
  293 
  294                                         regulator-state-mem {
  295                                                 regulator-off-in-suspend;
  296                                         };
  297                                 };
  298 
  299                                 ldo12_reg: LDO12 {
  300                                         regulator-name = "CAM_SENSOR_CORE_1.2V";
  301                                         regulator-min-microvolt = <1200000>;
  302                                         regulator-max-microvolt = <1200000>;
  303 
  304                                         regulator-state-mem {
  305                                                 regulator-off-in-suspend;
  306                                         };
  307                                 };
  308 
  309                                 ldo13_reg: LDO13 {
  310                                         regulator-name = "VGA_VDDIO_2.8V";
  311                                         regulator-min-microvolt = <2800000>;
  312                                         regulator-max-microvolt = <2800000>;
  313 
  314                                         regulator-state-mem {
  315                                                 regulator-off-in-suspend;
  316                                         };
  317                                 };
  318 
  319                                 ldo14_reg: LDO14 {
  320                                         regulator-name = "VGA_DVDD_1.8V";
  321                                         regulator-min-microvolt = <1800000>;
  322                                         regulator-max-microvolt = <1800000>;
  323 
  324                                         regulator-state-mem {
  325                                                 regulator-off-in-suspend;
  326                                         };
  327                                 };
  328 
  329                                 ldo15_reg: LDO15 {
  330                                         regulator-name = "CAM_ISP_HOST_2.8V";
  331                                         regulator-min-microvolt = <2800000>;
  332                                         regulator-max-microvolt = <2800000>;
  333 
  334                                         regulator-state-mem {
  335                                                 regulator-off-in-suspend;
  336                                         };
  337                                 };
  338 
  339                                 ldo16_reg: LDO16 {
  340                                         regulator-name = "VGA_AVDD_2.8V";
  341                                         regulator-min-microvolt = <2800000>;
  342                                         regulator-max-microvolt = <2800000>;
  343 
  344                                         regulator-state-mem {
  345                                                 regulator-off-in-suspend;
  346                                         };
  347                                 };
  348 
  349                                 ldo17_reg: LDO17 {
  350                                         regulator-name = "VCC_3.0V_LCD";
  351                                         regulator-min-microvolt = <3000000>;
  352                                         regulator-max-microvolt = <3000000>;
  353 
  354                                         regulator-state-mem {
  355                                                 regulator-off-in-suspend;
  356                                         };
  357                                 };
  358 
  359                                 buck1_reg: BUCK1 {
  360                                         regulator-name = "vddarm";
  361                                         regulator-min-microvolt = <750000>;
  362                                         regulator-max-microvolt = <1500000>;
  363 
  364                                         regulator-state-mem {
  365                                                 regulator-off-in-suspend;
  366                                                 regulator-suspend-microvolt = <1250000>;
  367                                         };
  368                                 };
  369 
  370                                 buck2_reg: BUCK2 {
  371                                         regulator-name = "vddint";
  372                                         regulator-min-microvolt = <750000>;
  373                                         regulator-max-microvolt = <1500000>;
  374 
  375                                         regulator-state-mem {
  376                                                 regulator-off-in-suspend;
  377                                                 regulator-suspend-microvolt = <1100000>;
  378                                         };
  379                                 };
  380 
  381                                 buck3_reg: BUCK3 {
  382                                         regulator-name = "VCC_1.8V";
  383                                         regulator-min-microvolt = <1800000>;
  384                                         regulator-max-microvolt = <1800000>;
  385                                         regulator-always-on;
  386                                 };
  387 
  388                                 buck4_reg: BUCK4 {
  389                                         regulator-name = "CAM_ISP_CORE_1.2V";
  390                                         regulator-min-microvolt = <1200000>;
  391                                         regulator-max-microvolt = <1200000>;
  392 
  393                                         regulator-state-mem {
  394                                                 regulator-off-in-suspend;
  395                                         };
  396                                 };
  397 
  398                                 ap32khz_reg: EN32KHz-AP {
  399                                         regulator-name = "32KHz AP";
  400                                         regulator-always-on;
  401                                 };
  402 
  403                                 cp32khz_reg: EN32KHz-CP {
  404                                         regulator-name = "32KHz CP";
  405                                 };
  406 
  407                                 vichg_reg: ENVICHG {
  408                                         regulator-name = "VICHG";
  409                                         regulator-always-on;
  410                                 };
  411 
  412                                 safe1_sreg: ESAFEOUT1 {
  413                                         regulator-name = "SAFEOUT1";
  414                                 };
  415 
  416                                 safe2_sreg: ESAFEOUT2 {
  417                                         regulator-name = "SAFEOUT2";
  418                                 };
  419                         };
  420                 };
  421         };
  422 
  423         i2c_musb: i2c-gpio-3 {
  424                 compatible = "i2c-gpio";
  425                 sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  426                 scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  427                 i2c-gpio,delay-us = <2>;
  428                 #address-cells = <1>;
  429                 #size-cells = <0>;
  430 
  431                 pinctrl-names = "default";
  432                 pinctrl-0 = <&musb_i2c_pins>;
  433 
  434                 fsa9480: musb@25 {
  435                         compatible = "fcs,fsa9480";
  436                         reg = <0x25>;
  437                         interrupt-parent = <&gph2>;
  438                         interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
  439 
  440                         pinctrl-names = "default";
  441                         pinctrl-0 = <&musb_irq>;
  442                 };
  443         };
  444 
  445         i2c_fuel: i2c-gpio-4 {
  446                 compatible = "i2c-gpio";
  447                 sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  448                 scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  449                 i2c-gpio,delay-us = <2>;
  450                 #address-cells = <1>;
  451                 #size-cells = <0>;
  452 
  453                 pinctrl-names = "default";
  454                 pinctrl-0 = <&fg_i2c_pins>;
  455 
  456                 fg: fuelgauge@36 {
  457                         compatible = "maxim,max17040";
  458                         reg = <0x36>;
  459                 };
  460         };
  461 
  462         i2c_touchkey: i2c-gpio-5 {
  463                 compatible = "i2c-gpio";
  464                 sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  465                 scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  466                 i2c-gpio,delay-us = <2>;
  467                 #address-cells = <1>;
  468                 #size-cells = <0>;
  469 
  470                 pinctrl-names = "default";
  471                 pinctrl-0 = <&touchkey_i2c_pins>;
  472 
  473                 touchkey@20 {
  474                         compatible = "cypress,aries-touchkey";
  475                         reg = <0x20>;
  476                         vdd-supply = <&touchkey_vdd>;
  477                         vcc-supply = <&buck3_reg>;
  478                         linux,keycodes = <KEY_MENU KEY_BACK
  479                                           KEY_HOMEPAGE KEY_SEARCH>;
  480                         interrupt-parent = <&gpj4>;
  481                         interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
  482 
  483                         pinctrl-names = "default";
  484                         pinctrl-0 = <&touchkey_irq>;
  485                 };
  486         };
  487 
  488         i2c_prox: i2c-gpio-6 {
  489                 compatible = "i2c-gpio";
  490                 sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  491                 scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  492                 i2c-gpio,delay-us = <2>;
  493                 #address-cells = <1>;
  494                 #size-cells = <0>;
  495 
  496                 pinctrl-names = "default";
  497                 pinctrl-0 = <&prox_i2c_pins>;
  498 
  499                 light-sensor@44 {
  500                         compatible = "sharp,gp2ap002a00f";
  501                         reg = <0x44>;
  502                         interrupt-parent = <&gph0>;
  503                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
  504                         vdd-supply = <&gp2a_vled>;
  505                         vio-supply = <&gp2a_vled>;
  506                         io-channels = <&gp2a_shunt>;
  507                         io-channel-names = "alsout";
  508                         sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
  509                         sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
  510 
  511                         pinctrl-names = "default";
  512                         pinctrl-0 = <&gp2a_irq>;
  513                 };
  514         };
  515 
  516         i2c_magnetometer: i2c-gpio-7 {
  517                 compatible = "i2c-gpio";
  518                 sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  519                 scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  520                 i2c-gpio,delay-us = <2>;
  521                 #address-cells = <1>;
  522                 #size-cells = <0>;
  523 
  524                 pinctrl-names = "default";
  525                 pinctrl-0 = <&magnetometer_i2c_pins>;
  526 
  527                 status = "disabled";
  528 
  529                 /* Yamaha yas529 magnetometer, no mainline binding */
  530         };
  531 
  532         vibrator: pwm-vibrator {
  533                 compatible = "pwm-vibrator";
  534                 pwms = <&pwm 1 44642 0>;
  535                 pwm-names = "enable";
  536                 vcc-supply = <&vibrator_pwr>;
  537                 pinctrl-names = "default";
  538                 pinctrl-0 = <&pwm1_out>;
  539         };
  540 
  541         poweroff: syscon-poweroff {
  542                 compatible = "syscon-poweroff";
  543                 regmap = <&pmu_syscon>;
  544                 offset = <0x681c>; /* PS_HOLD_CONTROL */
  545                 value = <0x5200>;
  546         };
  547 
  548         spi_lcd: spi-2 {
  549                 compatible = "spi-gpio";
  550                 #address-cells = <1>;
  551                 #size-cells = <0>;
  552 
  553                 sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
  554                 mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
  555                 cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
  556                 num-chipselects = <1>;
  557 
  558                 pinctrl-names = "default";
  559                 pinctrl-0 = <&lcd_spi_pins>;
  560 
  561                 panel@0 {
  562                         compatible = "samsung,s6e63m0";
  563                         reg = <0>;
  564                         reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
  565                         vdd3-supply = <&ldo7_reg>;
  566                         vci-supply = <&ldo17_reg>;
  567                         spi-max-frequency = <1200000>;
  568 
  569                         pinctrl-names = "default";
  570                         pinctrl-0 = <&panel_rst>;
  571 
  572                         port {
  573                                 lcd_ep: endpoint {
  574                                         remote-endpoint = <&fimd_ep>;
  575                                 };
  576                         };
  577                 };
  578         };
  579 };
  580 
  581 &adc {
  582         vdd-supply = <&ldo4_reg>;
  583 
  584         status = "okay";
  585 
  586         gp2a_shunt: current-sense-shunt {
  587                 compatible = "current-sense-shunt";
  588                 io-channels = <&adc 9>;
  589                 shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
  590                 #io-channel-cells = <0>;
  591         };
  592 };
  593 
  594 &fimd {
  595         pinctrl-names = "default";
  596         pinctrl-0 = <&lcd_clk &lcd_data24>;
  597         status = "okay";
  598 
  599         samsung,invert-vden;
  600         samsung,invert-vclk;
  601 
  602         #address-cells = <1>;
  603         #size-cells = <0>;
  604 
  605         port@3 {
  606                 reg = <3>;
  607                 fimd_ep: endpoint {
  608                         remote-endpoint = <&lcd_ep>;
  609                 };
  610         };
  611 };
  612 
  613 &hsotg {
  614         vusb_a-supply = <&ldo8_reg>;
  615         vusb_d-supply = <&ldo3_reg>;
  616         dr_mode = "peripheral";
  617         status = "okay";
  618 };
  619 
  620 &i2c2 {
  621         samsung,i2c-sda-delay = <100>;
  622         samsung,i2c-max-bus-freq = <400000>;
  623         samsung,i2c-slave-addr = <0x10>;
  624         status = "okay";
  625 
  626         touchscreen@4a {
  627                 compatible = "atmel,maxtouch";
  628                 reg = <0x4a>;
  629                 interrupt-parent = <&gpj0>;
  630                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
  631                 pinctrl-names = "default";
  632                 pinctrl-0 = <&ts_irq>;
  633                 reset-gpios = <&gpj1 3 GPIO_ACTIVE_LOW>;
  634         };
  635 };
  636 
  637 &i2s0 {
  638         dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
  639         status = "okay";
  640 };
  641 
  642 &mfc {
  643         memory-region = <&mfc_left>, <&mfc_right>;
  644 };
  645 
  646 &pinctrl0 {
  647         bt_reset: bt-reset-pins {
  648                 samsung,pins = "gpb-3";
  649                 samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
  650                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  651                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  652         };
  653 
  654         wlan_bt_en: wlan-bt-en-pins {
  655                 samsung,pins = "gpb-5";
  656                 samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
  657                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  658                 samsung,pin-val = <1>;
  659         };
  660 
  661         codec_ldo: codec-ldo-pins {
  662                 samsung,pins = "gpf3-4";
  663                 samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
  664                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  665         };
  666 
  667         prox_i2c_pins: gp2a-i2c-pins {
  668                 samsung,pins = "gpg0-2", "gpg2-2";
  669                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  670                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  671         };
  672 
  673         wlan_gpio_rst: wlan-gpio-rst-pins {
  674                 samsung,pins = "gpg1-2";
  675                 samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
  676                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  677         };
  678 
  679         bt_wake: bt-wake-pins {
  680                 samsung,pins = "gpg3-4";
  681                 samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
  682                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  683         };
  684 
  685         gp2a_irq: gp2a-irq-pins {
  686                 samsung,pins = "gph0-2";
  687                 samsung,pin-function = <S5PV210_PIN_FUNC_F>;
  688                 samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
  689                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  690         };
  691 
  692         pmic_dvs_pins: pmic-dvs-pins {
  693                 samsung,pins = "gph0-3", "gph0-4", "gph0-5";
  694                 samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
  695                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  696                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  697                 samsung,pin-val = <0>;
  698         };
  699 
  700         pmic_irq: pmic-irq-pins {
  701                 samsung,pins = "gph0-7";
  702                 samsung,pin-function = <S5PV210_PIN_FUNC_F>;
  703                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  704                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  705         };
  706 
  707         wifi_host_wake: wifi-host-wake-pins {
  708                 samsung,pins = "gph2-4";
  709                 samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
  710                 samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
  711                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  712         };
  713 
  714         bt_host_wake: bt-host-wake-pins {
  715                 samsung,pins = "gph2-5";
  716                 samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
  717                 samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
  718                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  719         };
  720 
  721         musb_irq: musq-irq-pins {
  722                 samsung,pins = "gph2-7";
  723                 samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
  724                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  725                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  726         };
  727 
  728         tf_detect: tf-detect-pins {
  729                 samsung,pins = "gph3-4";
  730                 samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
  731                 samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
  732                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  733         };
  734 
  735         wifi_wake: wifi-wake-pins {
  736                 samsung,pins = "gph3-5";
  737                 samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
  738                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  739         };
  740 
  741         magnetometer_i2c_pins: yas529-i2c-pins-pins {
  742                 samsung,pins = "gpj0-0", "gpj0-1";
  743                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  744                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  745         };
  746 
  747         ts_irq: ts-irq-pins {
  748                 samsung,pins = "gpj0-5";
  749                 samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
  750                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  751                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  752         };
  753 
  754         vibrator_ena: vibrator-ena-pins {
  755                 samsung,pins = "gpj1-1";
  756                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  757                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  758         };
  759 
  760         gp2a_power: gp2a-power-pins {
  761                 samsung,pins = "gpj1-4";
  762                 samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
  763                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  764                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  765         };
  766 
  767         touchkey_i2c_pins: touchkey-i2c-pins {
  768                 samsung,pins = "gpj3-0", "gpj3-1";
  769                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  770                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  771         };
  772 
  773         touchkey_vdd_ena: touchkey-vdd-ena-pins {
  774                 samsung,pins = "gpj3-2";
  775                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  776                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  777         };
  778 
  779         musb_i2c_pins: musb-i2c-pins {
  780                 samsung,pins = "gpj3-4", "gpj3-5";
  781                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  782                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  783         };
  784 
  785         accel_i2c_pins: accel-i2c-pins {
  786                 samsung,pins = "gpj3-6", "gpj3-7";
  787                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  788                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  789         };
  790 
  791         pmic_i2c_pins: pmic-i2c-pins-pins {
  792                 samsung,pins = "gpj4-0", "gpj4-3";
  793                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  794                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  795         };
  796 
  797         touchkey_irq: touchkey-irq-pins {
  798                 samsung,pins = "gpj4-1";
  799                 samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
  800                 samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
  801                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  802         };
  803 
  804         lcd_spi_pins: spi-lcd-pins {
  805                 samsung,pins = "mp01-1", "mp04-1", "mp04-3";
  806                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  807                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  808         };
  809 
  810         fg_i2c_pins: fg-i2c-pins {
  811                 samsung,pins = "mp05-0", "mp05-1";
  812                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  813                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  814         };
  815 
  816         sound_i2c_pins: sound-i2c-pins {
  817                 samsung,pins = "mp05-2", "mp05-3";
  818                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  819                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  820         };
  821 
  822         panel_rst: panel-rst-pins {
  823                 samsung,pins = "mp05-5";
  824                 samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
  825                 samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
  826         };
  827 };
  828 
  829 &pwm {
  830         samsung,pwm-outputs = <1>;
  831 };
  832 
  833 &rtc {
  834         clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
  835         clock-names = "rtc", "rtc_src";
  836 };
  837 
  838 &sdhci1 {
  839         #address-cells = <1>;
  840         #size-cells = <0>;
  841 
  842         bus-width = <4>;
  843         max-frequency = <38400000>;
  844         pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
  845         pinctrl-names = "default";
  846         cap-sd-highspeed;
  847         cap-mmc-highspeed;
  848         keep-power-in-suspend;
  849 
  850         mmc-pwrseq = <&wifi_pwrseq>;
  851         non-removable;
  852         status = "okay";
  853 
  854         assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
  855         assigned-clock-rates = <0>, <50000000>;
  856         assigned-clock-parents = <&clocks MOUT_MPLL>;
  857 
  858         wlan@1 {
  859                 reg = <1>;
  860                 compatible = "brcm,bcm4329-fmac";
  861                 interrupt-parent = <&gph2>;
  862                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
  863                 interrupt-names = "host-wake";
  864         };
  865 };
  866 
  867 &sdhci2 {
  868         bus-width = <4>;
  869         cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
  870         vmmc-supply = <&ldo5_reg>;
  871         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
  872         pinctrl-names = "default";
  873         status = "okay";
  874 
  875         assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
  876         assigned-clock-rates = <0>, <50000000>;
  877         assigned-clock-parents = <&clocks MOUT_MPLL>;
  878 };
  879 
  880 &uart0 {
  881         assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>;
  882         assigned-clock-rates = <0>, <111166667>;
  883         assigned-clock-parents = <&clocks MOUT_MPLL>;
  884 
  885         status = "okay";
  886 
  887         bluetooth {
  888                 compatible = "brcm,bcm4329-bt";
  889                 max-speed = <3000000>;
  890                 pinctrl-names = "default";
  891                 pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake
  892                              &bt_reset &bt_wake>;
  893                 shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
  894                 device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
  895                 interrupt-parent = <&gph2>;
  896                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
  897                 interrupt-names = "host-wakeup";
  898         };
  899 };
  900 
  901 &uart1 {
  902         status = "okay";
  903 };
  904 
  905 &uart2 {
  906         status = "okay";
  907 };
  908 
  909 &usbphy {
  910         status = "okay";
  911         vbus-supply = <&safe1_sreg>;
  912 };
  913 
  914 &xusbxti {
  915         clock-frequency = <24000000>;
  916 };
Cache object: f3c83cb1be61685454a4a25229668f44
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.
FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/s5pv210-aries.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/s5pv210-aries.dtsi
