Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/sama5d3xmb_cmp.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 /* 3 * sama5d3xmb_cmp.dts - Device Tree file for SAMA5D3x CMP mother board 4 * 5 * Copyright (C) 2016 Atmel, 6 */ 7 #include "sama5d3xcm_cmp.dtsi" 8 9 / { 10 compatible = "atmel,sama5d3xmb-cmp", "atmel,sama5d3xcm-cmp", "atmel,sama5d3", "atmel,sama5"; 11 12 ahb { 13 apb { 14 mmc0: mmc@f0000000 { 15 pinctrl-names = "default"; 16 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>; 17 status = "okay"; 18 slot@0 { 19 reg = <0>; 20 bus-width = <4>; 21 cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>; 22 }; 23 }; 24 25 spi0: spi@f0004000 { 26 dmas = <0>, <0>; /* Do not use DMA for spi0 */ 27 28 flash@0 { 29 compatible = "atmel,at25df321a"; 30 spi-max-frequency = <50000000>; 31 reg = <0>; 32 }; 33 }; 34 35 ssc0: ssc@f0008000 { 36 atmel,clk-from-rk-pin; 37 }; 38 39 /* 40 * i2c0 conflicts with ISI: 41 * disable it to allow the use of ISI 42 * can not enable audio when i2c0 disabled 43 */ 44 i2c0: i2c@f0014000 { 45 wm8904: wm8904@1a { 46 compatible = "wlf,wm8904"; 47 reg = <0x1a>; 48 clocks = <&pmc PMC_TYPE_SYSTEM 8>; 49 clock-names = "mclk"; 50 }; 51 }; 52 53 i2c1: i2c@f0018000 { 54 ov2640: camera@30 { 55 compatible = "ovti,ov2640"; 56 reg = <0x30>; 57 pinctrl-names = "default"; 58 pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; 59 resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>; 60 pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; 61 /* use pck1 for the master clock of ov2640 */ 62 clocks = <&pmc PMC_TYPE_SYSTEM 9>; 63 clock-names = "xvclk"; 64 assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>; 65 assigned-clock-rates = <25000000>; 66 67 port { 68 ov2640_0: endpoint { 69 remote-endpoint = <&isi_0>; 70 bus-width = <8>; 71 }; 72 }; 73 }; 74 }; 75 76 usart1: serial@f0020000 { 77 dmas = <0>, <0>; /* Do not use DMA for usart1 */ 78 pinctrl-names = "default"; 79 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>; 80 status = "okay"; 81 }; 82 83 isi: isi@f0034000 { 84 port { 85 isi_0: endpoint { 86 remote-endpoint = <&ov2640_0>; 87 bus-width = <8>; 88 vsync-active = <1>; 89 hsync-active = <1>; 90 }; 91 }; 92 }; 93 94 mmc1: mmc@f8000000 { 95 pinctrl-names = "default"; 96 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; 97 status = "okay"; 98 slot@0 { 99 reg = <0>; 100 bus-width = <4>; 101 cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>; 102 }; 103 }; 104 105 adc0: adc@f8018000 { 106 pinctrl-names = "default", "sleep"; 107 pinctrl-0 = < 108 &pinctrl_adc0_adtrg 109 &pinctrl_adc0_ad0 110 &pinctrl_adc0_ad1 111 &pinctrl_adc0_ad2 112 &pinctrl_adc0_ad3 113 &pinctrl_adc0_ad4 114 >; 115 pinctrl-1 = < 116 &pinctrl_adc0_adtrg_sleep 117 &pinctrl_adc0_ad0_sleep 118 &pinctrl_adc0_ad1_sleep 119 &pinctrl_adc0_ad2_sleep 120 &pinctrl_adc0_ad3_sleep 121 &pinctrl_adc0_ad4_sleep 122 >; 123 status = "okay"; 124 }; 125 126 macb1: ethernet@f802c000 { 127 phy-mode = "rmii"; 128 129 #address-cells = <1>; 130 #size-cells = <0>; 131 phy0: ethernet-phy@1 { 132 /*interrupt-parent = <&pioE>;*/ 133 /*interrupts = <30 IRQ_TYPE_EDGE_FALLING>;*/ 134 reg = <1>; 135 }; 136 }; 137 138 pinctrl@fffff200 { 139 adc0 { 140 pinctrl_adc0_adtrg_sleep: adc0_adtrg_1 { 141 atmel,pins = 142 <AT91_PIOD 19 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; 143 }; 144 pinctrl_adc0_ad0_sleep: adc0_ad0_1 { 145 atmel,pins = 146 <AT91_PIOD 20 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; 147 }; 148 pinctrl_adc0_ad1_sleep: adc0_ad1_1 { 149 atmel,pins = 150 <AT91_PIOD 21 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; 151 }; 152 pinctrl_adc0_ad2_sleep: adc0_ad2_1 { 153 atmel,pins = 154 <AT91_PIOD 22 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; 155 }; 156 pinctrl_adc0_ad3_sleep: adc0_ad3_1 { 157 atmel,pins = 158 <AT91_PIOD 23 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; 159 }; 160 pinctrl_adc0_ad4_sleep: adc0_ad4_1 { 161 atmel,pins = 162 <AT91_PIOD 24 AT91_PERIPH_GPIO (AT91_PINCTRL_OUTPUT | AT91_PINCTRL_OUTPUT_VAL(0))>; 163 }; 164 }; 165 166 board { 167 pinctrl_gpio_keys: gpio_keys { 168 atmel,pins = 169 <AT91_PIOE 27 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; 170 }; 171 172 pinctrl_mmc0_cd: mmc0_cd { 173 atmel,pins = 174 <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; 175 }; 176 177 pinctrl_mmc1_cd: mmc1_cd { 178 atmel,pins = 179 <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; 180 }; 181 182 pinctrl_pck0_as_audio_mck: pck0_as_audio_mck { 183 atmel,pins = 184 <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; 185 }; 186 187 pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { 188 atmel,pins = 189 <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; 190 }; 191 192 pinctrl_sensor_reset: sensor_reset-0 { 193 atmel,pins = 194 <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; 195 }; 196 197 pinctrl_sensor_power: sensor_power-0 { 198 atmel,pins = 199 <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; 200 }; 201 202 pinctrl_usba_vbus: usba_vbus { 203 atmel,pins = 204 <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; 205 }; 206 }; 207 }; 208 209 dbgu: serial@ffffee00 { 210 dmas = <0>, <0>; /* Do not use DMA for dbgu */ 211 status = "okay"; 212 }; 213 214 watchdog@fffffe40 { 215 status = "okay"; 216 }; 217 }; 218 219 usb0: gadget@500000 { 220 atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; 221 pinctrl-names = "default"; 222 pinctrl-0 = <&pinctrl_usba_vbus>; 223 status = "okay"; 224 }; 225 }; 226 227 sound { 228 compatible = "atmel,asoc-wm8904"; 229 pinctrl-names = "default"; 230 pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; 231 232 atmel,model = "wm8904 @ SAMA5D3EK"; 233 atmel,audio-routing = 234 "Headphone Jack", "HPOUTL", 235 "Headphone Jack", "HPOUTR", 236 "IN2L", "Line In Jack", 237 "IN2R", "Line In Jack", 238 "Mic", "MICBIAS", 239 "IN1L", "Mic"; 240 241 atmel,ssc-controller = <&ssc0>; 242 atmel,audio-codec = <&wm8904>; 243 244 status = "disabled"; 245 }; 246 247 /* Conflict with LCD pins */ 248 gpio_keys { 249 compatible = "gpio-keys"; 250 status = "okay"; 251 252 #address-cells = <1>; 253 #size-cells = <0>; 254 pinctrl-names = "default"; 255 pinctrl-0 = <&pinctrl_gpio_keys>; 256 257 pb_user1 { 258 label = "pb_user1"; 259 gpios = <&pioE 27 GPIO_ACTIVE_HIGH>; 260 linux,code = <0x100>; 261 wakeup-source; 262 }; 263 }; 264 };
Cache object: 27f29e762c5bda566dc27bfc5123c4ca
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]