Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/ste-href.dtsi
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright 2012 ST-Ericsson AB 4 */ 5 6 #include <dt-bindings/interrupt-controller/irq.h> 7 #include <dt-bindings/leds/common.h> 8 #include "ste-href-family-pinctrl.dtsi" 9 10 / { 11 memory { 12 device_type = "memory"; 13 reg = <0x00000000 0x20000000>; 14 }; 15 16 battery: battery { 17 compatible = "simple-battery"; 18 battery-type = "lithium-ion-polymer"; 19 }; 20 21 thermal-zones { 22 battery-thermal { 23 /* This zone will be polled by the battery temperature code */ 24 polling-delay = <0>; 25 polling-delay-passive = <0>; 26 thermal-sensors = <&bat_therm>; 27 }; 28 }; 29 30 bat_therm: thermistor { 31 compatible = "murata,ncp18wb473"; 32 io-channels = <&gpadc 0x02>; /* BatTemp */ 33 pullup-uv = <1800000>; 34 pullup-ohm = <230000>; 35 pulldown-ohm = <0>; 36 #thermal-sensor-cells = <0>; 37 }; 38 39 soc { 40 uart@80120000 { 41 pinctrl-names = "default", "sleep"; 42 pinctrl-0 = <&u0_a_1_default>; 43 pinctrl-1 = <&u0_a_1_sleep>; 44 status = "okay"; 45 }; 46 47 /* This UART is unused and thus left disabled */ 48 uart@80121000 { 49 pinctrl-names = "default", "sleep"; 50 pinctrl-0 = <&u1rxtx_a_1_default>; 51 pinctrl-1 = <&u1rxtx_a_1_sleep>; 52 }; 53 54 uart@80007000 { 55 pinctrl-names = "default", "sleep"; 56 pinctrl-0 = <&u2rxtx_c_1_default>; 57 pinctrl-1 = <&u2rxtx_c_1_sleep>; 58 status = "okay"; 59 }; 60 61 i2c@80004000 { 62 pinctrl-names = "default","sleep"; 63 pinctrl-0 = <&i2c0_a_1_default>; 64 pinctrl-1 = <&i2c0_a_1_sleep>; 65 status = "okay"; 66 }; 67 68 i2c@80122000 { 69 pinctrl-names = "default","sleep"; 70 pinctrl-0 = <&i2c1_b_2_default>; 71 pinctrl-1 = <&i2c1_b_2_sleep>; 72 status = "okay"; 73 }; 74 75 i2c@80128000 { 76 pinctrl-names = "default","sleep"; 77 pinctrl-0 = <&i2c2_b_2_default>; 78 pinctrl-1 = <&i2c2_b_2_sleep>; 79 status = "okay"; 80 lp5521@33 { 81 compatible = "national,lp5521"; 82 reg = <0x33>; 83 label = "lp5521_pri"; 84 clock-mode = /bits/ 8 <2>; 85 #address-cells = <1>; 86 #size-cells = <0>; 87 chan@0 { 88 reg = <0>; 89 led-cur = /bits/ 8 <0x2f>; 90 max-cur = /bits/ 8 <0x5f>; 91 color = <LED_COLOR_ID_BLUE>; 92 linux,default-trigger = "heartbeat"; 93 }; 94 chan@1 { 95 reg = <1>; 96 led-cur = /bits/ 8 <0x2f>; 97 max-cur = /bits/ 8 <0x5f>; 98 color = <LED_COLOR_ID_BLUE>; 99 }; 100 chan@2 { 101 reg = <2>; 102 led-cur = /bits/ 8 <0x2f>; 103 max-cur = /bits/ 8 <0x5f>; 104 color = <LED_COLOR_ID_BLUE>; 105 }; 106 }; 107 lp5521@34 { 108 compatible = "national,lp5521"; 109 reg = <0x34>; 110 label = "lp5521_sec"; 111 clock-mode = /bits/ 8 <2>; 112 #address-cells = <1>; 113 #size-cells = <0>; 114 chan@0 { 115 reg = <0>; 116 led-cur = /bits/ 8 <0x2f>; 117 max-cur = /bits/ 8 <0x5f>; 118 color = <LED_COLOR_ID_BLUE>; 119 }; 120 chan@1 { 121 reg = <1>; 122 led-cur = /bits/ 8 <0x2f>; 123 max-cur = /bits/ 8 <0x5f>; 124 color = <LED_COLOR_ID_BLUE>; 125 }; 126 chan@2 { 127 reg = <2>; 128 led-cur = /bits/ 8 <0x2f>; 129 max-cur = /bits/ 8 <0x5f>; 130 color = <LED_COLOR_ID_BLUE>; 131 }; 132 }; 133 bh1780@29 { 134 compatible = "rohm,bh1780gli"; 135 reg = <0x29>; 136 }; 137 }; 138 139 i2c@80110000 { 140 pinctrl-names = "default","sleep"; 141 pinctrl-0 = <&i2c3_c_2_default>; 142 pinctrl-1 = <&i2c3_c_2_sleep>; 143 status = "okay"; 144 }; 145 146 // External Micro SD slot 147 mmc@80126000 { 148 arm,primecell-periphid = <0x10480180>; 149 max-frequency = <100000000>; 150 bus-width = <4>; 151 cap-sd-highspeed; 152 cap-mmc-highspeed; 153 sd-uhs-sdr12; 154 sd-uhs-sdr25; 155 full-pwr-cycle; 156 st,sig-dir-dat0; 157 st,sig-dir-dat2; 158 st,sig-dir-cmd; 159 st,sig-pin-fbclk; 160 vmmc-supply = <&ab8500_ldo_aux3_reg>; 161 vqmmc-supply = <&vmmci>; 162 pinctrl-names = "default", "sleep"; 163 pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>; 164 pinctrl-1 = <&mc0_a_1_sleep>; 165 166 status = "okay"; 167 }; 168 169 // WLAN SDIO channel 170 mmc@80118000 { 171 arm,primecell-periphid = <0x10480180>; 172 max-frequency = <100000000>; 173 bus-width = <4>; 174 non-removable; 175 pinctrl-names = "default", "sleep"; 176 pinctrl-0 = <&mc1_a_1_default>; 177 pinctrl-1 = <&mc1_a_1_sleep>; 178 179 status = "okay"; 180 }; 181 182 // PoP:ed eMMC 183 mmc@80005000 { 184 arm,primecell-periphid = <0x10480180>; 185 max-frequency = <100000000>; 186 bus-width = <8>; 187 cap-mmc-highspeed; 188 non-removable; 189 no-sdio; 190 no-sd; 191 vmmc-supply = <&db8500_vsmps2_reg>; 192 pinctrl-names = "default", "sleep"; 193 pinctrl-0 = <&mc2_a_1_default>; 194 pinctrl-1 = <&mc2_a_1_sleep>; 195 196 status = "okay"; 197 }; 198 199 // On-board eMMC 200 mmc@80114000 { 201 arm,primecell-periphid = <0x10480180>; 202 max-frequency = <100000000>; 203 bus-width = <8>; 204 cap-mmc-highspeed; 205 non-removable; 206 no-sdio; 207 no-sd; 208 vmmc-supply = <&ab8500_ldo_aux2_reg>; 209 pinctrl-names = "default", "sleep"; 210 pinctrl-0 = <&mc4_a_1_default>; 211 pinctrl-1 = <&mc4_a_1_sleep>; 212 213 status = "okay"; 214 }; 215 216 msp0: msp@80123000 { 217 pinctrl-names = "default"; 218 pinctrl-0 = <&msp0txrxtfstck_a_1_default>; 219 status = "okay"; 220 }; 221 222 msp1: msp@80124000 { 223 pinctrl-names = "default"; 224 pinctrl-0 = <&msp1txrx_a_1_default>; 225 status = "okay"; 226 }; 227 228 msp2: msp@80117000 { 229 pinctrl-names = "default"; 230 pinctrl-0 = <&msp2_a_1_default>; 231 }; 232 233 msp3: msp@80125000 { 234 status = "okay"; 235 }; 236 237 prcmu@80157000 { 238 ab8500 { 239 gpio { 240 }; 241 242 phy { 243 pinctrl-names = "default", "sleep"; 244 pinctrl-0 = <&usb_a_1_default>; 245 pinctrl-1 = <&usb_a_1_sleep>; 246 }; 247 248 regulator { 249 ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { 250 regulator-name = "V-DISPLAY"; 251 }; 252 253 ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { 254 regulator-name = "V-eMMC1"; 255 }; 256 257 ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { 258 regulator-name = "V-MMC-SD"; 259 }; 260 261 ab8500_ldo_intcore_reg: ab8500_ldo_intcore { 262 regulator-name = "V-INTCORE"; 263 }; 264 265 ab8500_ldo_tvout_reg: ab8500_ldo_tvout { 266 regulator-name = "V-TVOUT"; 267 }; 268 269 ab8500_ldo_audio_reg: ab8500_ldo_audio { 270 regulator-name = "V-AUD"; 271 }; 272 273 ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { 274 regulator-name = "V-AMIC1"; 275 }; 276 277 ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { 278 regulator-name = "V-AMIC2"; 279 }; 280 281 ab8500_ldo_dmic_reg: ab8500_ldo_dmic { 282 regulator-name = "V-DMIC"; 283 }; 284 285 ab8500_ldo_ana_reg: ab8500_ldo_ana { 286 regulator-name = "V-CSI/DSI"; 287 }; 288 }; 289 }; 290 }; 291 292 pinctrl { 293 sdi0 { 294 sdi0_default_mode: sdi0_default { 295 /* Some boards set additional settings here */ 296 }; 297 }; 298 }; 299 300 mcde@a0350000 { 301 pinctrl-names = "default", "sleep"; 302 pinctrl-0 = <&lcd_default_mode>; 303 pinctrl-1 = <&lcd_sleep_mode>; 304 }; 305 }; 306 };
Cache object: d85ebb466aa1918caaef81366b99be68
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]