stm32mp157c-odyssey.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
    2 /*
    3  * Copyright (C) 2020 Marcin Sloniewski <marcin.sloniewski@gmail.com>.
    4  */
    5 
    6 /dts-v1/;
    7 
    8 #include "stm32mp157c-odyssey-som.dtsi"
    9 
   10 / {
   11         model = "Seeed Studio Odyssey-STM32MP157C Board";
   12         compatible = "seeed,stm32mp157c-odyssey",
   13                      "seeed,stm32mp157c-odyssey-som", "st,stm32mp157";
   14 
   15         aliases {
   16                 ethernet0 = &ethernet0;
   17                 serial0 = &uart4;
   18         };
   19 
   20         chosen {
   21                 stdout-path = "serial0:115200n8";
   22         };
   23 };
   24 
   25 &dcmi {
   26         pinctrl-names = "default", "sleep";
   27         pinctrl-0 = <&dcmi_pins_b>;
   28         pinctrl-1 = <&dcmi_sleep_pins_b>;
   29 };
   30 
   31 &ethernet0 {
   32         status = "okay";
   33         pinctrl-0 = <&ethernet0_rgmii_pins_a>;
   34         pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
   35         pinctrl-names = "default", "sleep";
   36         phy-mode = "rgmii-id";
   37         max-speed = <1000>;
   38         phy-handle = <&phy0>;
   39         assigned-clocks = <&rcc ETHCK_K>, <&rcc PLL4_P>;
   40         assigned-clock-parents = <&rcc PLL4_P>;
   41         assigned-clock-rates = <125000000>; /* Clock PLL4 to 750Mhz in ATF/U-Boot */
   42         st,eth-clk-sel;
   43 
   44         mdio0 {
   45                 #address-cells = <1>;
   46                 #size-cells = <0>;
   47                 compatible = "snps,dwmac-mdio";
   48                 phy0: ethernet-phy@7 { /* KSZ9031RN */
   49                         reg = <7>;
   50                         reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
   51                         reset-assert-us = <10000>;
   52                         reset-deassert-us = <300>;
   53                 };
   54         };
   55 };
   56 
   57 &i2c1 {
   58         pinctrl-names = "default", "sleep";
   59         pinctrl-0 = <&i2c1_pins_a>;
   60         pinctrl-1 = <&i2c1_sleep_pins_a>;
   61         i2c-scl-rising-time-ns = <100>;
   62         i2c-scl-falling-time-ns = <7>;
   63         status = "okay";
   64         /delete-property/dmas;
   65         /delete-property/dma-names;
   66 };
   67 
   68 &sdmmc1 {
   69         pinctrl-names = "default", "opendrain", "sleep";
   70         pinctrl-0 = <&sdmmc1_b4_pins_a>;
   71         pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
   72         pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
   73         cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
   74         disable-wp;
   75         st,neg-edge;
   76         bus-width = <4>;
   77         vmmc-supply = <&v3v3>;
   78         status = "okay";
   79 };
   80 
   81 &uart4 {
   82         pinctrl-names = "default";
   83         pinctrl-0 = <&uart4_pins_a>;
   84         /delete-property/dmas;
   85         /delete-property/dma-names;
   86         status = "okay";
   87 };
   88

Cache object: 03a45100907e3949fbe297a1e7e19fbe

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/stm32mp157c-odyssey.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/stm32mp157c-odyssey.dts