stm32mp15xx-dhcom-picoitx.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
    2 /*
    3  * Copyright (C) 2020 Marek Vasut <marex@denx.de>
    4  */
    5 
    6 #include <dt-bindings/input/input.h>
    7 #include <dt-bindings/pwm/pwm.h>
    8 
    9 / {
   10         aliases {
   11                 serial0 = &uart4;
   12                 serial1 = &usart3;
   13                 serial2 = &uart8;
   14         };
   15 
   16         chosen {
   17                 stdout-path = "serial0:115200n8";
   18         };
   19 
   20         led {
   21                 compatible = "gpio-leds";
   22 
   23                 led-0 {
   24                         label = "yellow:led";
   25                         gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>;
   26                         default-state = "off";
   27                 };
   28         };
   29 };
   30 
   31 &adc {
   32         status = "disabled";
   33 };
   34 
   35 &dac {
   36         status = "disabled";
   37 };
   38 
   39 &fmc {
   40         status = "disabled";
   41 };
   42 
   43 &gpioa {
   44         /*
   45          * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable
   46          * port power. This signal should be handled by USB power sequencing
   47          * in order to turn on port power when USB bus is powered up, but so
   48          * far there is no such functionality.
   49          */
   50         usb-port-power-hog {
   51                 gpio-hog;
   52                 gpios = <13 0>;
   53                 output-low;
   54                 line-name = "usb-port-power";
   55         };
   56 };
   57 
   58 &gpioc {
   59         gpio-line-names = "", "", "", "",
   60                           "", "", "PicoITX-In1", "",
   61                           "", "", "", "",
   62                           "", "", "", "";
   63 };
   64 
   65 &gpiod {
   66         gpio-line-names = "", "", "", "",
   67                           "", "", "DHCOM-B", "",
   68                           "", "", "", "PicoITX-Out1",
   69                           "PicoITX-Out2", "", "", "";
   70 };
   71 
   72 &gpiog {
   73         gpio-line-names = "PicoITX-In2", "", "", "",
   74                           "", "", "", "",
   75                           "DHCOM-L", "", "", "",
   76                           "", "", "", "";
   77 };
   78 
   79 &i2c2 { /* On board-to-board connector (optional) */
   80         pinctrl-names = "default";
   81         pinctrl-0 = <&i2c2_pins_a>;
   82         i2c-scl-rising-time-ns = <185>;
   83         i2c-scl-falling-time-ns = <20>;
   84         status = "okay";
   85         /* spare dmas for other usage */
   86         /delete-property/dmas;
   87         /delete-property/dma-names;
   88 };
   89 
   90 &i2c5 { /* On board-to-board connector */
   91         pinctrl-names = "default";
   92         pinctrl-0 = <&i2c5_pins_a>;
   93         i2c-scl-rising-time-ns = <185>;
   94         i2c-scl-falling-time-ns = <20>;
   95         status = "okay";
   96         /* spare dmas for other usage */
   97         /delete-property/dmas;
   98         /delete-property/dma-names;
   99 };
  100 
  101 &ksz8851 {
  102         status = "disabled";
  103 };
  104 
  105 &usart3 {
  106         pinctrl-names = "default";
  107         pinctrl-0 = <&usart3_pins_a>;
  108         /delete-property/dmas;
  109         /delete-property/dma-names;
  110         status = "okay";
  111 };
  112 
  113 &uart8 {
  114         pinctrl-names = "default";
  115         pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
  116         /delete-property/dmas;
  117         /delete-property/dma-names;
  118         status = "okay";
  119 };
  120 
  121 &usbh_ehci {
  122         phys = <&usbphyc_port0>;
  123         status = "okay";
  124 };
  125 
  126 &usbh_ohci {
  127         phys = <&usbphyc_port0>;
  128         status = "okay";
  129 };
  130 
  131 &usbotg_hs {
  132         dr_mode = "otg";
  133         pinctrl-0 = <&usbotg_hs_pins_a>;
  134         pinctrl-names = "default";
  135         phy-names = "usb2-phy";
  136         phys = <&usbphyc_port1 0>;
  137         vbus-supply = <&vbus_otg>;
  138         status = "okay";
  139 };
  140 
  141 &usbphyc {
  142         status = "okay";
  143 };
  144 
  145 &usbphyc_port0 {
  146         phy-supply = <&vdd_usb>;
  147 };
  148 
  149 &usbphyc_port1 {
  150         phy-supply = <&vdd_usb>;
  151 };

Cache object: e3b10d39111ff6b43bfd03093e372b02

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/stm32mp15xx-dhcom-picoitx.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/stm32mp15xx-dhcom-picoitx.dtsi