sun4i-a10-mini-xplus.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 /*
    2  * Copyright 2012 Maxime Ripard
    3  *
    4  * Maxime Ripard <maxime.ripard@free-electrons.com>
    5  *
    6  * This file is dual-licensed: you can use it either under the terms
    7  * of the GPL or the X11 license, at your option. Note that this dual
    8  * licensing only applies to this file, and not this project as a
    9  * whole.
   10  *
   11  *  a) This file is free software; you can redistribute it and/or
   12  *     modify it under the terms of the GNU General Public License as
   13  *     published by the Free Software Foundation; either version 2 of the
   14  *     License, or (at your option) any later version.
   15  *
   16  *     This file is distributed in the hope that it will be useful,
   17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
   18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   19  *     GNU General Public License for more details.
   20  *
   21  * Or, alternatively,
   22  *
   23  *  b) Permission is hereby granted, free of charge, to any person
   24  *     obtaining a copy of this software and associated documentation
   25  *     files (the "Software"), to deal in the Software without
   26  *     restriction, including without limitation the rights to use,
   27  *     copy, modify, merge, publish, distribute, sublicense, and/or
   28  *     sell copies of the Software, and to permit persons to whom the
   29  *     Software is furnished to do so, subject to the following
   30  *     conditions:
   31  *
   32  *     The above copyright notice and this permission notice shall be
   33  *     included in all copies or substantial portions of the Software.
   34  *
   35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
   36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
   37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
   38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
   39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
   40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
   41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
   42  *     OTHER DEALINGS IN THE SOFTWARE.
   43  */
   44 
   45 /dts-v1/;
   46 #include "sun4i-a10.dtsi"
   47 #include "sunxi-common-regulators.dtsi"
   48 
   49 #include <dt-bindings/gpio/gpio.h>
   50 
   51 / {
   52         model = "PineRiver Mini X-Plus";
   53         compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
   54 
   55         aliases {
   56                 serial0 = &uart0;
   57         };
   58 
   59         chosen {
   60                 stdout-path = "serial0:115200n8";
   61         };
   62 };
   63 
   64 &ehci0 {
   65         status = "okay";
   66 };
   67 
   68 &ehci1 {
   69         status = "okay";
   70 };
   71 
   72 &i2c0 {
   73         status = "okay";
   74 
   75         axp209: pmic@34 {
   76                 compatible = "x-powers,axp209";
   77                 reg = <0x34>;
   78                 interrupts = <0>;
   79 
   80                 interrupt-controller;
   81                 #interrupt-cells = <1>;
   82         };
   83 };
   84 
   85 &ir0 {
   86         pinctrl-names = "default";
   87         pinctrl-0 = <&ir0_rx_pins>;
   88         status = "okay";
   89 };
   90 
   91 &ir0_rx_pins {
   92         /* The ir receiver is not always populated */
   93         bias-pull-up;
   94 };
   95 
   96 &mmc0 {
   97         vmmc-supply = <&reg_vcc3v3>;
   98         bus-width = <4>;
   99         cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
  100         status = "okay";
  101 };
  102 
  103 &ohci0 {
  104         status = "okay";
  105 };
  106 
  107 &ohci1 {
  108         status = "okay";
  109 };
  110 
  111 &otg_sram {
  112         status = "okay";
  113 };
  114 
  115 &reg_usb0_vbus {
  116         regulator-boot-on;
  117         status = "okay";
  118 };
  119 
  120 &reg_usb1_vbus {
  121         status = "okay";
  122 };
  123 
  124 &reg_usb2_vbus {
  125         status = "okay";
  126 };
  127 
  128 &uart0 {
  129         pinctrl-names = "default";
  130         pinctrl-0 = <&uart0_pb_pins>;
  131         status = "okay";
  132 };
  133 
  134 &usb_otg {
  135         dr_mode = "host";
  136         status = "okay";
  137 };
  138 
  139 &usbphy {
  140         usb0_vbus-supply = <&reg_usb0_vbus>;
  141         usb1_vbus-supply = <&reg_usb1_vbus>;
  142         usb2_vbus-supply = <&reg_usb2_vbus>;
  143         status = "okay";
  144 };

Cache object: cb620c84024037a35dc8ebe6fe8cd66c

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/sun4i-a10-mini-xplus.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/sun4i-a10-mini-xplus.dts