sun5i-a13-olinuxino-micro.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 /*
    2  * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
    3  * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
    4  *
    5  * This file is dual-licensed: you can use it either under the terms
    6  * of the GPL or the X11 license, at your option. Note that this dual
    7  * licensing only applies to this file, and not this project as a
    8  * whole.
    9  *
   10  *  a) This file is free software; you can redistribute it and/or
   11  *     modify it under the terms of the GNU General Public License as
   12  *     published by the Free Software Foundation; either version 2 of the
   13  *     License, or (at your option) any later version.
   14  *
   15  *     This file is distributed in the hope that it will be useful,
   16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
   17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   18  *     GNU General Public License for more details.
   19  *
   20  * Or, alternatively,
   21  *
   22  *  b) Permission is hereby granted, free of charge, to any person
   23  *     obtaining a copy of this software and associated documentation
   24  *     files (the "Software"), to deal in the Software without
   25  *     restriction, including without limitation the rights to use,
   26  *     copy, modify, merge, publish, distribute, sublicense, and/or
   27  *     sell copies of the Software, and to permit persons to whom the
   28  *     Software is furnished to do so, subject to the following
   29  *     conditions:
   30  *
   31  *     The above copyright notice and this permission notice shall be
   32  *     included in all copies or substantial portions of the Software.
   33  *
   34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
   35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
   36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
   37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
   38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
   39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
   40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
   41  *     OTHER DEALINGS IN THE SOFTWARE.
   42  */
   43 
   44 /dts-v1/;
   45 #include "sun5i-a13.dtsi"
   46 #include "sunxi-common-regulators.dtsi"
   47 
   48 #include <dt-bindings/gpio/gpio.h>
   49 
   50 / {
   51         model = "Olimex A13-Olinuxino Micro";
   52         compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
   53 
   54         aliases {
   55                 serial0 = &uart1;
   56         };
   57 
   58         chosen {
   59                 stdout-path = "serial0:115200n8";
   60         };
   61 
   62         leds {
   63                 compatible = "gpio-leds";
   64                 pinctrl-names = "default";
   65                 pinctrl-0 = <&led_pins_olinuxinom>;
   66 
   67                 led {
   68                         label = "a13-olinuxino-micro:green:power";
   69                         gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
   70                         default-state = "on";
   71                 };
   72         };
   73 };
   74 
   75 &ehci0 {
   76         status = "okay";
   77 };
   78 
   79 &i2c0 {
   80         status = "okay";
   81 };
   82 
   83 &i2c1 {
   84         status = "okay";
   85 };
   86 
   87 &i2c2 {
   88         status = "okay";
   89 };
   90 
   91 &mmc0 {
   92         vmmc-supply = <&reg_vcc3v3>;
   93         bus-width = <4>;
   94         cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
   95         status = "okay";
   96 };
   97 
   98 &ohci0 {
   99         status = "okay";
  100 };
  101 
  102 &otg_sram {
  103         status = "okay";
  104 };
  105 
  106 &pio {
  107         led_pins_olinuxinom: led-pin {
  108                 pins = "PG9";
  109                 function = "gpio_out";
  110                 drive-strength = <20>;
  111         };
  112 };
  113 
  114 &reg_usb0_vbus {
  115         gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
  116         status = "okay";
  117 };
  118 
  119 &reg_usb1_vbus {
  120         gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
  121         status = "okay";
  122 };
  123 
  124 &uart1 {
  125         pinctrl-names = "default";
  126         pinctrl-0 = <&uart1_pg_pins>;
  127         status = "okay";
  128 };
  129 
  130 &usb_otg {
  131         dr_mode = "otg";
  132         status = "okay";
  133 };
  134 
  135 &usbphy {
  136         usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
  137         usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
  138         usb0_vbus-supply = <&reg_usb0_vbus>;
  139         usb1_vbus-supply = <&reg_usb1_vbus>;
  140         status = "okay";
  141 };

Cache object: 1435b64ba295aaaf6e2ec31497add580

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/sun5i-a13-olinuxino-micro.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/sun5i-a13-olinuxino-micro.dts