sun7i-a20-bananapi.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 /*
    2  * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
    3  *
    4  * Hans de Goede <hdegoede@redhat.com>
    5  *
    6  * This file is dual-licensed: you can use it either under the terms
    7  * of the GPL or the X11 license, at your option. Note that this dual
    8  * licensing only applies to this file, and not this project as a
    9  * whole.
   10  *
   11  *  a) This file is free software; you can redistribute it and/or
   12  *     modify it under the terms of the GNU General Public License as
   13  *     published by the Free Software Foundation; either version 2 of the
   14  *     License, or (at your option) any later version.
   15  *
   16  *     This file is distributed in the hope that it will be useful,
   17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
   18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   19  *     GNU General Public License for more details.
   20  *
   21  * Or, alternatively,
   22  *
   23  *  b) Permission is hereby granted, free of charge, to any person
   24  *     obtaining a copy of this software and associated documentation
   25  *     files (the "Software"), to deal in the Software without
   26  *     restriction, including without limitation the rights to use,
   27  *     copy, modify, merge, publish, distribute, sublicense, and/or
   28  *     sell copies of the Software, and to permit persons to whom the
   29  *     Software is furnished to do so, subject to the following
   30  *     conditions:
   31  *
   32  *     The above copyright notice and this permission notice shall be
   33  *     included in all copies or substantial portions of the Software.
   34  *
   35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
   36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
   37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
   38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
   39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
   40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
   41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
   42  *     OTHER DEALINGS IN THE SOFTWARE.
   43  */
   44 
   45 /dts-v1/;
   46 #include "sun7i-a20.dtsi"
   47 #include "sunxi-common-regulators.dtsi"
   48 
   49 #include <dt-bindings/gpio/gpio.h>
   50 #include <dt-bindings/interrupt-controller/irq.h>
   51 
   52 / {
   53         model = "LeMaker Banana Pi";
   54         compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
   55 
   56         aliases {
   57                 serial0 = &uart0;
   58                 serial1 = &uart3;
   59                 serial2 = &uart7;
   60         };
   61 
   62         chosen {
   63                 stdout-path = "serial0:115200n8";
   64         };
   65 
   66         hdmi-connector {
   67                 compatible = "hdmi-connector";
   68                 type = "a";
   69 
   70                 port {
   71                         hdmi_con_in: endpoint {
   72                                 remote-endpoint = <&hdmi_out_con>;
   73                         };
   74                 };
   75         };
   76 
   77         leds {
   78                 compatible = "gpio-leds";
   79 
   80                 led {
   81                         label = "bananapi:green:usr";
   82                         gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
   83                 };
   84         };
   85 
   86         reg_gmac_3v3: gmac-3v3 {
   87                 compatible = "regulator-fixed";
   88                 regulator-name = "gmac-3v3";
   89                 regulator-min-microvolt = <3300000>;
   90                 regulator-max-microvolt = <3300000>;
   91                 startup-delay-us = <100000>;
   92                 enable-active-high;
   93                 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
   94         };
   95 };
   96 
   97 &ahci {
   98         status = "okay";
   99 };
  100 
  101 &codec {
  102         status = "okay";
  103 };
  104 
  105 &cpu0 {
  106         cpu-supply = <&reg_dcdc2>;
  107         operating-points =
  108                 /* kHz    uV */
  109                 <960000 1400000>,
  110                 <912000 1400000>,
  111                 <864000 1350000>,
  112                 <720000 1250000>,
  113                 <528000 1150000>,
  114                 <312000 1100000>,
  115                 <144000 1050000>;
  116 };
  117 
  118 &de {
  119         status = "okay";
  120 };
  121 
  122 &ehci0 {
  123         status = "okay";
  124 };
  125 
  126 &ehci1 {
  127         status = "okay";
  128 };
  129 
  130 &gmac {
  131         pinctrl-names = "default";
  132         pinctrl-0 = <&gmac_rgmii_pins>;
  133         phy-handle = <&phy1>;
  134         phy-mode = "rgmii-id";
  135         phy-supply = <&reg_gmac_3v3>;
  136         status = "okay";
  137 };
  138 
  139 &hdmi {
  140         status = "okay";
  141 };
  142 
  143 &hdmi_out {
  144         hdmi_out_con: endpoint {
  145                 remote-endpoint = <&hdmi_con_in>;
  146         };
  147 };
  148 
  149 &i2c0 {
  150         status = "okay";
  151 
  152         axp209: pmic@34 {
  153                 reg = <0x34>;
  154                 interrupt-parent = <&nmi_intc>;
  155                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
  156         };
  157 };
  158 
  159 &i2c2 {
  160         status = "okay";
  161 };
  162 
  163 &ir0 {
  164         pinctrl-names = "default";
  165         pinctrl-0 = <&ir0_rx_pin>;
  166         status = "okay";
  167 };
  168 
  169 &gmac_mdio {
  170         phy1: ethernet-phy@1 {
  171                 reg = <1>;
  172         };
  173 };
  174 
  175 &mmc0 {
  176         vmmc-supply = <&reg_vcc3v3>;
  177         bus-width = <4>;
  178         cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
  179         status = "okay";
  180 };
  181 
  182 &ohci0 {
  183         status = "okay";
  184 };
  185 
  186 &ohci1 {
  187         status = "okay";
  188 };
  189 
  190 &otg_sram {
  191         status = "okay";
  192 };
  193 
  194 &pio {
  195         vcc-pa-supply = <&reg_vcc3v3>;
  196         vcc-pc-supply = <&reg_vcc3v3>;
  197         vcc-pe-supply = <&reg_vcc3v3>;
  198         vcc-pf-supply = <&reg_vcc3v3>;
  199         vcc-pg-supply = <&reg_vcc3v3>;
  200         gpio-line-names =
  201                 /* PA */
  202                 "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
  203                         "ETXD2", "ETXD1", "ETXD0",
  204                 "ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
  205                         "ETXEN", "ETXCK", "ECRS",
  206                 "ECOL", "ETXERR", "", "", "", "", "", "",
  207                 "", "", "", "", "", "", "", "",
  208                 /* PB */
  209                 "PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
  210                 "", "USB0-DRV", "", "", "", "", "", "",
  211                 "", "", "", "", "SCL", "SDA", "", "",
  212                 "", "", "", "", "", "", "", "",
  213                 /* PC */
  214                 "", "", "", "", "", "", "", "",
  215                 "", "", "", "", "", "", "", "",
  216                 "", "", "", "", "", "", "", "",
  217                 "", "", "", "", "", "", "", "",
  218                 /* PD */
  219                 "", "", "", "", "", "", "", "",
  220                 "", "", "", "", "", "", "", "",
  221                 "", "", "", "", "", "", "", "",
  222                 "", "", "", "", "", "", "", "",
  223                 /* PE */
  224                 "", "", "", "", "", "", "", "",
  225                 "", "", "", "", "", "", "", "",
  226                 "", "", "", "", "", "", "", "",
  227                 "", "", "", "", "", "", "", "",
  228                 /* PF */
  229                 "SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
  230                         "SD0-D2", "", "",
  231                 "", "", "", "", "", "", "", "",
  232                 "", "", "", "", "", "", "", "",
  233                 "", "", "", "", "", "", "", "",
  234                 /* PG */
  235                 "", "", "", "", "", "", "", "",
  236                 "", "", "", "", "", "", "", "",
  237                 "", "", "", "", "", "", "", "",
  238                 "", "", "", "", "", "", "", "",
  239                 /* PH */
  240                 "TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
  241                 "", "", "SD0-DET", "", "", "", "", "",
  242                 "", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
  243                 "LED1", "", "", "", "", "", "", "",
  244                 /* PI */
  245                 "", "", "", "IO-GCLK", "", "", "", "",
  246                 "", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
  247                         "SPI-MISO", "SPI-CE1", "",
  248                 "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
  249                 "", "", "", "", "", "", "", "";
  250 };
  251 
  252 #include "axp209.dtsi"
  253 
  254 &reg_dcdc2 {
  255         regulator-always-on;
  256         regulator-min-microvolt = <1000000>;
  257         regulator-max-microvolt = <1400000>;
  258         regulator-name = "vdd-cpu";
  259 };
  260 
  261 &reg_dcdc3 {
  262         regulator-always-on;
  263         regulator-min-microvolt = <1000000>;
  264         regulator-max-microvolt = <1400000>;
  265         regulator-name = "vdd-int-dll";
  266 };
  267 
  268 &reg_ldo1 {
  269         regulator-name = "vdd-rtc";
  270 };
  271 
  272 &reg_ldo2 {
  273         regulator-always-on;
  274         regulator-min-microvolt = <3000000>;
  275         regulator-max-microvolt = <3000000>;
  276         regulator-name = "avcc";
  277 };
  278 
  279 &reg_usb0_vbus {
  280         status = "okay";
  281 };
  282 
  283 &reg_usb1_vbus {
  284         status = "okay";
  285 };
  286 
  287 &reg_usb2_vbus {
  288         status = "okay";
  289 };
  290 
  291 &spi0 {
  292         pinctrl-names = "default";
  293         pinctrl-0 = <&spi0_pi_pins>,
  294                     <&spi0_cs0_pi_pin>,
  295                     <&spi0_cs1_pi_pin>;
  296         status = "okay";
  297 };
  298 
  299 &uart0 {
  300         pinctrl-names = "default";
  301         pinctrl-0 = <&uart0_pb_pins>;
  302         status = "okay";
  303 };
  304 
  305 &uart3 {
  306         pinctrl-names = "default";
  307         pinctrl-0 = <&uart3_ph_pins>;
  308         status = "okay";
  309 };
  310 
  311 &uart7 {
  312         pinctrl-names = "default";
  313         pinctrl-0 = <&uart7_pi_pins>;
  314         status = "okay";
  315 };
  316 
  317 &usb_otg {
  318         dr_mode = "otg";
  319         status = "okay";
  320 };
  321 
  322 &usb_power_supply {
  323         status = "okay";
  324 };
  325 
  326 &usbphy {
  327         usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
  328         usb0_vbus_power-supply = <&usb_power_supply>;
  329         usb0_vbus-supply = <&reg_usb0_vbus>;
  330         usb1_vbus-supply = <&reg_usb1_vbus>;
  331         usb2_vbus-supply = <&reg_usb2_vbus>;
  332         status = "okay";
  333 };

Cache object: 39652121b20f6835a329fdf431c24c56

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/sun7i-a20-bananapi.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/sun7i-a20-bananapi.dts