sun8i-h2-plus-orangepi-r1.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 /*
    2  * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
    3  *
    4  * This file is dual-licensed: you can use it either under the terms
    5  * of the GPL or the X11 license, at your option. Note that this dual
    6  * licensing only applies to this file, and not this project as a
    7  * whole.
    8  *
    9  *  a) This file is free software; you can redistribute it and/or
   10  *     modify it under the terms of the GNU General Public License as
   11  *     published by the Free Software Foundation; either version 2 of the
   12  *     License, or (at your option) any later version.
   13  *
   14  *     This file is distributed in the hope that it will be useful,
   15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
   16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   17  *     GNU General Public License for more details.
   18  *
   19  * Or, alternatively,
   20  *
   21  *  b) Permission is hereby granted, free of charge, to any person
   22  *     obtaining a copy of this software and associated documentation
   23  *     files (the "Software"), to deal in the Software without
   24  *     restriction, including without limitation the rights to use,
   25  *     copy, modify, merge, publish, distribute, sublicense, and/or
   26  *     sell copies of the Software, and to permit persons to whom the
   27  *     Software is furnished to do so, subject to the following
   28  *     conditions:
   29  *
   30  *     The above copyright notice and this permission notice shall be
   31  *     included in all copies or substantial portions of the Software.
   32  *
   33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
   34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
   35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
   36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
   37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
   38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
   39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
   40  *     OTHER DEALINGS IN THE SOFTWARE.
   41  */
   42 
   43 /* Orange Pi R1 is based on Orange Pi Zero design */
   44 #include "sun8i-h2-plus-orangepi-zero.dts"
   45 
   46 / {
   47         model = "Xunlong Orange Pi R1";
   48         compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
   49 
   50         /delete-node/ reg_vcc_wifi;
   51 
   52         /*
   53          * Ths pin of this regulator is the same with the Wi-Fi extra
   54          * regulator on the original Zero. However it's used for USB
   55          * Ethernet rather than the Wi-Fi now.
   56          */
   57         reg_vcc_usb_eth: reg-vcc-usb-ethernet {
   58                 compatible = "regulator-fixed";
   59                 regulator-min-microvolt = <3300000>;
   60                 regulator-max-microvolt = <3300000>;
   61                 regulator-name = "vcc-usb-ethernet";
   62                 enable-active-high;
   63                 gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
   64         };
   65 
   66         aliases {
   67                 ethernet1 = &rtl8189etv;
   68         };
   69 };
   70 
   71 &spi0 {
   72         status = "okay";
   73 
   74         flash@0 {
   75                 compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
   76         };
   77 };
   78 
   79 &ohci1 {
   80         /*
   81          * RTL8152B USB-Ethernet adapter is connected to USB1,
   82          * and it's a USB 2.0 device. So the OHCI1 controller
   83          * can be left disabled.
   84          */
   85         status = "disabled";
   86 };
   87 
   88 &mmc1 {
   89         vmmc-supply = <&reg_vcc3v3>;
   90         vqmmc-supply = <&reg_vcc3v3>;
   91 
   92         rtl8189etv: sdio_wifi@1 {
   93                 reg = <1>;
   94         };
   95 };
   96 
   97 &usbphy {
   98         usb1_vbus-supply = <&reg_vcc_usb_eth>;
   99 };

Cache object: 4fef4f88edbd4579af2eafb08cf3f2a2

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/sun8i-h2-plus-orangepi-r1.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/sun8i-h2-plus-orangepi-r1.dts