sunxi-h3-h5-emlid-neutis.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
    2 /*
    3  * DTSI for Emlid Neutis SoMs.
    4  *
    5  * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
    6  */
    7 
    8 #include "sunxi-common-regulators.dtsi"
    9 
   10 #include <dt-bindings/gpio/gpio.h>
   11 
   12 / {
   13         aliases {
   14                 serial0 = &uart0;
   15         };
   16 
   17         chosen {
   18                 stdout-path = "serial0:115200n8";
   19         };
   20 
   21         wifi_pwrseq: wifi_pwrseq {
   22                 compatible = "mmc-pwrseq-simple";
   23                 reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
   24                 post-power-on-delay-ms = <200>;
   25                 clocks = <&rtc CLK_OSC32K_FANOUT>;
   26                 clock-names = "ext_clock";
   27         };
   28 };
   29 
   30 &cpu0 {
   31         cpu-supply = <&vdd_cpux>;
   32 };
   33 
   34 &reg_usb0_vbus {
   35         gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
   36         status = "okay";
   37 };
   38 
   39 
   40 &de {
   41         status = "okay";
   42 };
   43 
   44 &ohci0 {
   45         status = "okay";
   46 };
   47 
   48 &ohci1 {
   49         status = "okay";
   50 };
   51 
   52 &ohci2 {
   53         status = "okay";
   54 };
   55 
   56 &ohci3 {
   57         status = "okay";
   58 };
   59 
   60 
   61 &ehci0 {
   62         status = "okay";
   63 };
   64 
   65 &ehci1 {
   66         status = "okay";
   67 };
   68 
   69 &ehci2 {
   70         status = "okay";
   71 };
   72 
   73 &ehci3 {
   74         status = "okay";
   75 };
   76 
   77 &mmc0 {
   78         vmmc-supply = <&reg_vcc3v3>;
   79         bus-width = <4>;
   80         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
   81         status = "okay";
   82 };
   83 
   84 
   85 &mmc1 {
   86         vmmc-supply = <&reg_vcc3v3>;
   87         vqmmc-supply = <&reg_vcc3v3>;
   88         mmc-pwrseq = <&wifi_pwrseq>;
   89         bus-width = <4>;
   90         non-removable;
   91         status = "okay";
   92 
   93         brcmf: wifi@1 {
   94                 reg = <1>;
   95                 compatible = "brcm,bcm4329-fmac";
   96                 interrupt-parent = <&r_pio>;
   97                 interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;  /* PL5 */
   98                 interrupt-names = "host-wake";
   99         };
  100 };
  101 
  102 &mmc2 {
  103         pinctrl-names = "default";
  104         pinctrl-0 = <&mmc2_8bit_pins>;
  105         vmmc-supply = <&reg_vcc3v3>;
  106         bus-width = <8>;
  107         non-removable;
  108         cap-mmc-hw-reset;
  109         status = "okay";
  110 };
  111 
  112 &uart0 {
  113         pinctrl-names = "default";
  114         pinctrl-0 = <&uart0_pa_pins>;
  115         status = "okay";
  116 };
  117 
  118 
  119 &uart1 {
  120         pinctrl-names = "default";
  121         pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
  122         uart-has-rtscts;
  123         status = "okay";
  124 
  125         bluetooth {
  126                 compatible = "brcm,bcm43438-bt";
  127                 clocks = <&rtc CLK_OSC32K_FANOUT>;
  128                 clock-names = "lpo";
  129                 vbat-supply = <&reg_vcc3v3>;
  130                 vddio-supply = <&reg_vcc3v3>;
  131                 shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
  132                 device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
  133         };
  134 };
  135 
  136 &uart2 {
  137         pinctrl-names = "default";
  138         pinctrl-0 = <&uart2_pins>;
  139         status = "okay";
  140 };
  141 
  142 &uart3 {
  143         pinctrl-names = "default";
  144         pinctrl-0 = <&uart3_pins>;
  145         status = "okay";
  146 };
  147 
  148 &usbphy {
  149         usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
  150         usb0_vbus-supply = <&reg_usb0_vbus>;
  151         status = "okay";
  152 };
  153 
  154 &usb_otg {
  155         dr_mode = "otg";
  156         status = "okay";
  157 };
  158 
  159 &codec {
  160         allwinner,audio-routing =
  161                 "Line Out", "LINEOUT",
  162                 "LINEIN", "Line In",
  163                 "MIC1", "Mic",
  164                 "MIC2", "Mic",
  165                 "Mic",  "MBIAS";
  166 };
  167 
  168 &i2c0 {
  169         status = "okay";
  170 };

Cache object: 6a65c282a23e3b8b385e187f807e9e6d

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/sunxi-h3-h5-emlid-neutis.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/sunxi-h3-h5-emlid-neutis.dtsi