vf-colibri-eval-v3.dtsi

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
    2 /*
    3  * Copyright 2014-2020 Toradex
    4  */
    5 
    6 / {
    7         chosen {
    8                 stdout-path = "serial0:115200n8";
    9         };
   10 
   11         clk16m: clk16m {
   12                 compatible = "fixed-clock";
   13                 #clock-cells = <0>;
   14                 clock-frequency = <16000000>;
   15         };
   16 
   17         panel: panel {
   18                 compatible = "edt,et057090dhu";
   19                 backlight = <&bl>;
   20 
   21                 port {
   22                         panel_in: endpoint {
   23                                 remote-endpoint = <&dcu_out>;
   24                         };
   25                 };
   26         };
   27 
   28         reg_3v3: regulator-3v3 {
   29                 compatible = "regulator-fixed";
   30                 regulator-name = "3.3V";
   31                 regulator-min-microvolt = <3300000>;
   32                 regulator-max-microvolt = <3300000>;
   33         };
   34 
   35         reg_5v0: regulator-5v0 {
   36                 compatible = "regulator-fixed";
   37                 regulator-name = "5V";
   38                 regulator-min-microvolt = <5000000>;
   39                 regulator-max-microvolt = <5000000>;
   40         };
   41 
   42         reg_usbh_vbus: regulator-usbh-vbus {
   43                 compatible = "regulator-fixed";
   44                 pinctrl-names = "default";
   45                 pinctrl-0 = <&pinctrl_usbh1_reg>;
   46                 regulator-name = "VCC_USB[1-4]";
   47                 regulator-min-microvolt = <5000000>;
   48                 regulator-max-microvolt = <5000000>;
   49                 gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
   50                 vin-supply = <&reg_5v0>;
   51         };
   52 };
   53 
   54 &bl {
   55         brightness-levels = <0 4 8 16 32 64 128 255>;
   56         default-brightness-level = <6>;
   57         power-supply = <&reg_3v3>;
   58         status  = "okay";
   59 };
   60 
   61 &dcu0 {
   62         pinctrl-names = "default";
   63         pinctrl-0 = <&pinctrl_dcu0_1>;
   64         status = "okay";
   65 
   66         port {
   67                 dcu_out: endpoint {
   68                         remote-endpoint = <&panel_in>;
   69                 };
   70         };
   71 };
   72 
   73 &dspi1 {
   74         status = "okay";
   75 
   76         mcp2515can: can@0 {
   77                 compatible = "microchip,mcp2515";
   78                 pinctrl-names = "default";
   79                 pinctrl-0 = <&pinctrl_can_int>;
   80                 reg = <0>;
   81                 clocks = <&clk16m>;
   82                 spi-max-frequency = <10000000>;
   83                 interrupt-parent = <&gpio1>;
   84                 interrupts = <11 IRQ_TYPE_EDGE_RISING>;
   85         };
   86 };
   87 
   88 &esdhc1 {
   89         pinctrl-names = "default";
   90         pinctrl-0 = <&pinctrl_esdhc1>;
   91         bus-width = <4>;
   92         status = "okay";
   93 };
   94 
   95 &fec1 {
   96         phy-mode = "rmii";
   97         pinctrl-names = "default";
   98         pinctrl-0 = <&pinctrl_fec1>;
   99         status = "okay";
  100 };
  101 
  102 &i2c0 {
  103         status = "okay";
  104 
  105         /* M41T0M6 real time clock on carrier board */
  106         rtc: rtc@68 {
  107                 compatible = "st,m41t0";
  108                 reg = <0x68>;
  109         };
  110 };
  111 
  112 &pwm0 {
  113         status = "okay";
  114 };
  115 
  116 &pwm1 {
  117         status = "okay";
  118 };
  119 
  120 &reg_module_3v3 {
  121         vin-supply = <&reg_3v3>;
  122 };
  123 
  124 &tcon0 {
  125         status = "okay";
  126 };
  127 
  128 &uart0 {
  129         status = "okay";
  130 };
  131 
  132 &uart1 {
  133         status = "okay";
  134 };
  135 
  136 &uart2 {
  137         status = "okay";
  138 };
  139 
  140 &usbh1 {
  141         vbus-supply = <&reg_usbh_vbus>;
  142 };
  143 
  144 &iomuxc {
  145         vf610-colibri {
  146                 pinctrl_can_int: can_int {
  147                         fsl,pins = <
  148                                 VF610_PAD_PTB21__GPIO_43        0x22ed
  149                         >;
  150                 };
  151         };
  152 };

Cache object: a06dd5d4557ab76f07ca60bfd3167222

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/vf-colibri-eval-v3.dtsi

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/vf-colibri-eval-v3.dtsi