Now available: The Design and Implementation of the FreeBSD Operating System (Second Edition)
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]
FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/vf610-zii-ssmb-dtu.dts
Version:
- FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10
SearchContext: - none - 3 - 10
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 2 3 /* 4 * Device tree file for ZII's SSMB DTU board 5 * 6 * SSMB - SPU3 Switch Management Board 7 * DTU - Digital Tapping Unit 8 * 9 * Copyright (C) 2015-2019 Zodiac Inflight Innovations 10 * 11 * Based on an original 'vf610-twr.dts' which is Copyright 2015, 12 * Freescale Semiconductor, Inc. 13 */ 14 15 /dts-v1/; 16 #include "vf610.dtsi" 17 18 / { 19 model = "ZII VF610 SSMB DTU Board"; 20 compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610"; 21 22 chosen { 23 stdout-path = &uart0; 24 }; 25 26 memory@80000000 { 27 device_type = "memory"; 28 reg = <0x80000000 0x20000000>; 29 }; 30 31 gpio-leds { 32 compatible = "gpio-leds"; 33 pinctrl-0 = <&pinctrl_leds_debug>; 34 pinctrl-names = "default"; 35 36 led-debug { 37 label = "zii:green:debug1"; 38 gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; 39 linux,default-trigger = "heartbeat"; 40 }; 41 }; 42 43 reg_vcc_3v3_mcu: regulator { 44 compatible = "regulator-fixed"; 45 regulator-name = "vcc_3v3_mcu"; 46 regulator-min-microvolt = <3300000>; 47 regulator-max-microvolt = <3300000>; 48 }; 49 50 supply-voltage-monitor { 51 compatible = "iio-hwmon"; 52 io-channels = <&adc0 8>, /* 12V_MAIN */ 53 <&adc0 9>, /* +3.3V */ 54 <&adc1 8>, /* VCC_1V5 */ 55 <&adc1 9>; /* VCC_1V2 */ 56 }; 57 }; 58 59 &adc0 { 60 vref-supply = <®_vcc_3v3_mcu>; 61 status = "okay"; 62 }; 63 64 &adc1 { 65 vref-supply = <®_vcc_3v3_mcu>; 66 status = "okay"; 67 }; 68 69 &edma0 { 70 status = "okay"; 71 }; 72 73 &edma1 { 74 status = "okay"; 75 }; 76 77 &esdhc0 { 78 pinctrl-names = "default"; 79 pinctrl-0 = <&pinctrl_esdhc0>; 80 bus-width = <8>; 81 non-removable; 82 no-1-8-v; 83 keep-power-in-suspend; 84 no-sdio; 85 no-sd; 86 status = "okay"; 87 }; 88 89 &esdhc1 { 90 pinctrl-names = "default"; 91 pinctrl-0 = <&pinctrl_esdhc1>; 92 bus-width = <4>; 93 no-sdio; 94 status = "okay"; 95 }; 96 97 &fec1 { 98 phy-mode = "rmii"; 99 pinctrl-names = "default"; 100 pinctrl-0 = <&pinctrl_fec1>; 101 status = "okay"; 102 103 fixed-link { 104 speed = <100>; 105 full-duplex; 106 }; 107 108 mdio1: mdio { 109 #address-cells = <1>; 110 #size-cells = <0>; 111 clock-frequency = <12500000>; 112 suppress-preamble; 113 status = "okay"; 114 115 switch0: switch0@0 { 116 compatible = "marvell,mv88e6190"; 117 pinctrl-0 = <&pinctrl_gpio_switch0>; 118 pinctrl-names = "default"; 119 reg = <0>; 120 eeprom-length = <65536>; 121 interrupt-parent = <&gpio3>; 122 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 123 interrupt-controller; 124 #interrupt-cells = <2>; 125 126 ports { 127 #address-cells = <1>; 128 #size-cells = <0>; 129 130 port@0 { 131 reg = <0>; 132 label = "cpu"; 133 ethernet = <&fec1>; 134 135 fixed-link { 136 speed = <100>; 137 full-duplex; 138 }; 139 }; 140 141 port@1 { 142 reg = <1>; 143 label = "eth_cu_100_3"; 144 }; 145 146 port@5 { 147 reg = <5>; 148 label = "eth_cu_1000_4"; 149 }; 150 151 port@6 { 152 reg = <6>; 153 label = "eth_cu_1000_5"; 154 }; 155 156 port@8 { 157 reg = <8>; 158 label = "eth_cu_1000_1"; 159 }; 160 161 port@9 { 162 reg = <9>; 163 label = "eth_cu_1000_2"; 164 phy-handle = <&phy9>; 165 phy-mode = "sgmii"; 166 managed = "in-band-status"; 167 }; 168 }; 169 170 mdio1 { 171 compatible = "marvell,mv88e6xxx-mdio-external"; 172 #address-cells = <1>; 173 #size-cells = <0>; 174 175 phy9: phy9@0 { 176 compatible = "ethernet-phy-ieee802.3-c45"; 177 pinctrl-0 = <&pinctrl_gpio_phy9>; 178 pinctrl-names = "default"; 179 interrupt-parent = <&gpio2>; 180 interrupts = <30 IRQ_TYPE_LEVEL_LOW>; 181 reg = <0>; 182 }; 183 }; 184 }; 185 }; 186 }; 187 188 &i2c0 { 189 clock-frequency = <100000>; 190 pinctrl-names = "default"; 191 pinctrl-0 = <&pinctrl_i2c0>; 192 status = "okay"; 193 194 gpio6: gpio-expander@22 { 195 compatible = "nxp,pca9554"; 196 reg = <0x22>; 197 gpio-controller; 198 #gpio-cells = <2>; 199 }; 200 201 /* On SSMB */ 202 temperature-sensor@48 { 203 compatible = "national,lm75"; 204 reg = <0x48>; 205 }; 206 207 /* On DSB */ 208 temperature-sensor@4d { 209 compatible = "national,lm75"; 210 reg = <0x4d>; 211 }; 212 213 eeprom@50 { 214 compatible = "atmel,24c04"; 215 reg = <0x50>; 216 label = "nameplate"; 217 }; 218 219 eeprom@52 { 220 compatible = "atmel,24c04"; 221 reg = <0x52>; 222 }; 223 }; 224 225 &snvsrtc { 226 status = "disabled"; 227 }; 228 229 &uart0 { 230 pinctrl-names = "default"; 231 pinctrl-0 = <&pinctrl_uart0>; 232 status = "okay"; 233 }; 234 235 &iomuxc { 236 pinctrl_dspi1: dspi1grp { 237 fsl,pins = < 238 VF610_PAD_PTD5__DSPI1_CS0 0x1182 239 VF610_PAD_PTD4__DSPI1_CS1 0x1182 240 VF610_PAD_PTC6__DSPI1_SIN 0x1181 241 VF610_PAD_PTC7__DSPI1_SOUT 0x1182 242 VF610_PAD_PTC8__DSPI1_SCK 0x1182 243 >; 244 }; 245 246 pinctrl_esdhc0: esdhc0grp { 247 fsl,pins = < 248 VF610_PAD_PTC0__ESDHC0_CLK 0x31ef 249 VF610_PAD_PTC1__ESDHC0_CMD 0x31ef 250 VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef 251 VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef 252 VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef 253 VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef 254 VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef 255 VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef 256 VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef 257 VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef 258 >; 259 }; 260 261 pinctrl_esdhc1: esdhc1grp { 262 fsl,pins = < 263 VF610_PAD_PTA24__ESDHC1_CLK 0x31ef 264 VF610_PAD_PTA25__ESDHC1_CMD 0x31ef 265 VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef 266 VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef 267 VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef 268 VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef 269 >; 270 }; 271 272 pinctrl_fec1: fec1grp { 273 fsl,pins = < 274 VF610_PAD_PTA6__RMII_CLKIN 0x30d1 275 VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 276 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 277 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 278 VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 279 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 280 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 281 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 282 VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 283 VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 284 >; 285 }; 286 287 pinctrl_gpio_phy9: pinctrl-gpio-phy9 { 288 fsl,pins = < 289 VF610_PAD_PTB24__GPIO_94 0x219d 290 >; 291 }; 292 293 pinctrl_gpio_switch0: pinctrl-gpio-switch0 { 294 fsl,pins = < 295 VF610_PAD_PTB28__GPIO_98 0x219d 296 >; 297 }; 298 299 pinctrl_i2c0: i2c0grp { 300 fsl,pins = < 301 VF610_PAD_PTB14__I2C0_SCL 0x37ff 302 VF610_PAD_PTB15__I2C0_SDA 0x37ff 303 >; 304 }; 305 306 pinctrl_i2c1: i2c1grp { 307 fsl,pins = < 308 VF610_PAD_PTB16__I2C1_SCL 0x37ff 309 VF610_PAD_PTB17__I2C1_SDA 0x37ff 310 >; 311 }; 312 313 pinctrl_leds_debug: pinctrl-leds-debug { 314 fsl,pins = < 315 VF610_PAD_PTD3__GPIO_82 0x31c2 316 >; 317 }; 318 319 pinctrl_uart0: uart0grp { 320 fsl,pins = < 321 VF610_PAD_PTB10__UART0_TX 0x21a2 322 VF610_PAD_PTB11__UART0_RX 0x21a1 323 >; 324 }; 325 };
Cache object: ba5e785971c4ba4e92c107dda92ff98c
[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]