zynq-zc706.dts

Version: - FREEBSD - FREEBSD-13-STABLE - FREEBSD-13-0 - FREEBSD-12-STABLE - FREEBSD-12-0 - FREEBSD-11-STABLE - FREEBSD-11-0 - FREEBSD-10-STABLE - FREEBSD-10-0 - FREEBSD-9-STABLE - FREEBSD-9-0 - FREEBSD-8-STABLE - FREEBSD-8-0 - FREEBSD-7-STABLE - FREEBSD-7-0 - FREEBSD-6-STABLE - FREEBSD-6-0 - FREEBSD-5-STABLE - FREEBSD-5-0 - FREEBSD-4-STABLE - FREEBSD-3-STABLE - FREEBSD22 - l41 - OPENBSD - linux-2.6 - MK84 - PLAN9 - xnu-8792
SearchContext: - none - 3 - 10

    1 // SPDX-License-Identifier: GPL-2.0
    2 /*
    3  *  Copyright (C) 2011 - 2014 Xilinx
    4  *  Copyright (C) 2012 National Instruments Corp.
    5  */
    6 /dts-v1/;
    7 #include "zynq-7000.dtsi"
    8 
    9 / {
   10         model = "Xilinx ZC706 board";
   11         compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
   12 
   13         aliases {
   14                 ethernet0 = &gem0;
   15                 i2c0 = &i2c0;
   16                 serial0 = &uart1;
   17                 mmc0 = &sdhci0;
   18         };
   19 
   20         memory@0 {
   21                 device_type = "memory";
   22                 reg = <0x0 0x40000000>;
   23         };
   24 
   25         chosen {
   26                 bootargs = "";
   27                 stdout-path = "serial0:115200n8";
   28         };
   29 
   30         usb_phy0: phy0 {
   31                 compatible = "usb-nop-xceiv";
   32                 #phy-cells = <0>;
   33         };
   34 };
   35 
   36 &clkc {
   37         ps-clk-frequency = <33333333>;
   38 };
   39 
   40 &gem0 {
   41         status = "okay";
   42         phy-mode = "rgmii-id";
   43         phy-handle = <&ethernet_phy>;
   44         pinctrl-names = "default";
   45         pinctrl-0 = <&pinctrl_gem0_default>;
   46 
   47         ethernet_phy: ethernet-phy@7 {
   48                 reg = <7>;
   49                 device_type = "ethernet-phy";
   50         };
   51 };
   52 
   53 &gpio0 {
   54         pinctrl-names = "default";
   55         pinctrl-0 = <&pinctrl_gpio0_default>;
   56 };
   57 
   58 &i2c0 {
   59         status = "okay";
   60         clock-frequency = <400000>;
   61         pinctrl-names = "default";
   62         pinctrl-0 = <&pinctrl_i2c0_default>;
   63 
   64         i2c-mux@74 {
   65                 compatible = "nxp,pca9548";
   66                 #address-cells = <1>;
   67                 #size-cells = <0>;
   68                 reg = <0x74>;
   69 
   70                 i2c@0 {
   71                         #address-cells = <1>;
   72                         #size-cells = <0>;
   73                         reg = <0>;
   74                         si570: clock-generator@5d {
   75                                 #clock-cells = <0>;
   76                                 compatible = "silabs,si570";
   77                                 temperature-stability = <50>;
   78                                 reg = <0x5d>;
   79                                 factory-fout = <156250000>;
   80                                 clock-frequency = <148500000>;
   81                         };
   82                 };
   83 
   84                 i2c@1 {
   85                         #address-cells = <1>;
   86                         #size-cells = <0>;
   87                         reg = <1>;
   88                         adv7511: hdmi-tx@39 {
   89                                 compatible = "adi,adv7511";
   90                                 reg = <0x39>;
   91                                 adi,input-depth = <8>;
   92                                 adi,input-colorspace = "yuv422";
   93                                 adi,input-clock = "1x";
   94                                 adi,input-style = <3>;
   95                                 adi,input-justification = "evenly";
   96                         };
   97                 };
   98 
   99                 i2c@2 {
  100                         #address-cells = <1>;
  101                         #size-cells = <0>;
  102                         reg = <2>;
  103                         eeprom@54 {
  104                                 compatible = "atmel,24c08";
  105                                 reg = <0x54>;
  106                         };
  107                 };
  108 
  109                 i2c@3 {
  110                         #address-cells = <1>;
  111                         #size-cells = <0>;
  112                         reg = <3>;
  113                         gpio@21 {
  114                                 compatible = "ti,tca6416";
  115                                 reg = <0x21>;
  116                                 gpio-controller;
  117                                 #gpio-cells = <2>;
  118                         };
  119                 };
  120 
  121                 i2c@4 {
  122                         #address-cells = <1>;
  123                         #size-cells = <0>;
  124                         reg = <4>;
  125                         rtc@51 {
  126                                 compatible = "nxp,pcf8563";
  127                                 reg = <0x51>;
  128                         };
  129                 };
  130 
  131                 i2c@7 {
  132                         #address-cells = <1>;
  133                         #size-cells = <0>;
  134                         reg = <7>;
  135                         ucd90120@65 {
  136                                 compatible = "ti,ucd90120";
  137                                 reg = <0x65>;
  138                         };
  139                 };
  140         };
  141 };
  142 
  143 &pinctrl0 {
  144         pinctrl_gem0_default: gem0-default {
  145                 mux {
  146                         function = "ethernet0";
  147                         groups = "ethernet0_0_grp";
  148                 };
  149 
  150                 conf {
  151                         groups = "ethernet0_0_grp";
  152                         slew-rate = <0>;
  153                         io-standard = <4>;
  154                 };
  155 
  156                 conf-rx {
  157                         pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
  158                         bias-high-impedance;
  159                         low-power-disable;
  160                 };
  161 
  162                 conf-tx {
  163                         pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
  164                         low-power-enable;
  165                         bias-disable;
  166                 };
  167 
  168                 mux-mdio {
  169                         function = "mdio0";
  170                         groups = "mdio0_0_grp";
  171                 };
  172 
  173                 conf-mdio {
  174                         groups = "mdio0_0_grp";
  175                         slew-rate = <0>;
  176                         io-standard = <1>;
  177                         bias-disable;
  178                 };
  179         };
  180 
  181         pinctrl_gpio0_default: gpio0-default {
  182                 mux {
  183                         function = "gpio0";
  184                         groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
  185                 };
  186 
  187                 conf {
  188                         groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
  189                         slew-rate = <0>;
  190                         io-standard = <1>;
  191                 };
  192 
  193                 conf-pull-up {
  194                         pins = "MIO46", "MIO47";
  195                         bias-pull-up;
  196                 };
  197 
  198                 conf-pull-none {
  199                         pins = "MIO7";
  200                         bias-disable;
  201                 };
  202         };
  203 
  204         pinctrl_i2c0_default: i2c0-default {
  205                 mux {
  206                         groups = "i2c0_10_grp";
  207                         function = "i2c0";
  208                 };
  209 
  210                 conf {
  211                         groups = "i2c0_10_grp";
  212                         bias-pull-up;
  213                         slew-rate = <0>;
  214                         io-standard = <1>;
  215                 };
  216         };
  217 
  218         pinctrl_sdhci0_default: sdhci0-default {
  219                 mux {
  220                         groups = "sdio0_2_grp";
  221                         function = "sdio0";
  222                 };
  223 
  224                 conf {
  225                         groups = "sdio0_2_grp";
  226                         slew-rate = <0>;
  227                         io-standard = <1>;
  228                         bias-disable;
  229                 };
  230 
  231                 mux-cd {
  232                         groups = "gpio0_14_grp";
  233                         function = "sdio0_cd";
  234                 };
  235 
  236                 conf-cd {
  237                         groups = "gpio0_14_grp";
  238                         bias-high-impedance;
  239                         bias-pull-up;
  240                         slew-rate = <0>;
  241                         io-standard = <1>;
  242                 };
  243 
  244                 mux-wp {
  245                         groups = "gpio0_15_grp";
  246                         function = "sdio0_wp";
  247                 };
  248 
  249                 conf-wp {
  250                         groups = "gpio0_15_grp";
  251                         bias-high-impedance;
  252                         bias-pull-up;
  253                         slew-rate = <0>;
  254                         io-standard = <1>;
  255                 };
  256         };
  257 
  258         pinctrl_uart1_default: uart1-default {
  259                 mux {
  260                         groups = "uart1_10_grp";
  261                         function = "uart1";
  262                 };
  263 
  264                 conf {
  265                         groups = "uart1_10_grp";
  266                         slew-rate = <0>;
  267                         io-standard = <1>;
  268                 };
  269 
  270                 conf-rx {
  271                         pins = "MIO49";
  272                         bias-high-impedance;
  273                 };
  274 
  275                 conf-tx {
  276                         pins = "MIO48";
  277                         bias-disable;
  278                 };
  279         };
  280 
  281         pinctrl_usb0_default: usb0-default {
  282                 mux {
  283                         groups = "usb0_0_grp";
  284                         function = "usb0";
  285                 };
  286 
  287                 conf {
  288                         groups = "usb0_0_grp";
  289                         slew-rate = <0>;
  290                         io-standard = <1>;
  291                 };
  292 
  293                 conf-rx {
  294                         pins = "MIO29", "MIO31", "MIO36";
  295                         bias-high-impedance;
  296                 };
  297 
  298                 conf-tx {
  299                         pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
  300                                "MIO35", "MIO37", "MIO38", "MIO39";
  301                         bias-disable;
  302                 };
  303         };
  304 };
  305 
  306 &sdhci0 {
  307         status = "okay";
  308         pinctrl-names = "default";
  309         pinctrl-0 = <&pinctrl_sdhci0_default>;
  310 };
  311 
  312 &uart1 {
  313         status = "okay";
  314         pinctrl-names = "default";
  315         pinctrl-0 = <&pinctrl_uart1_default>;
  316 };
  317 
  318 &usb0 {
  319         status = "okay";
  320         dr_mode = "host";
  321         usb-phy = <&usb_phy0>;
  322         pinctrl-names = "default";
  323         pinctrl-0 = <&pinctrl_usb0_default>;
  324 };

Cache object: 5d851b9697c40a8e91614c21a5392db4

[ source navigation ] [ diff markup ] [ identifier search ] [ freetext search ] [ file search ] [ list types ] [ track identifier ]

This page is part of the FreeBSD/Linux Linux Kernel Cross-Reference, and was automatically generated using a modified version of the LXR engine.

FreeBSD/Linux Kernel Cross Reference sys/contrib/device-tree/src/arm/zynq-zc706.dts

FreeBSD/Linux Kernel Cross Reference
sys/contrib/device-tree/src/arm/zynq-zc706.dts